CANNICE iblue 5S User manual

SMART VOICE PROMPT
BLUETOOTH HEADSET
iblue 5S INSTRUCTION

FOLLOWING ITEMS ARE INCLUDED
USB cableEarhook
Ear cap

SCHEMATIC DIAGRAM
①
②
③
④
⑤
⑥
⑦
※ Make sure you have read the operating instruction manual and security
announcements to ensure the proper use of the bluetooth headset.It's strongly
recommend that this user manual should be kept properly for future reference.
The pictures in the manual only used for description,the real procut might be
different from it in the pictures.
① Charge jack
② Volume +
③ Volume -
④ Noise reduction mic
⑤ Multifunction button
⑥ Status indicator
⑦ Talking mic

The iblue5S comes with the chargeable battery that can't be disassembled
inside.Make sure the headset is fully charged before first time using.
1 Use the AC charger to connect with the charge jack.
2 plug the AC charger into the power socket.red indicator flashes whilte
charging.
3 The red indicator change to blue after fully charged,then pull out the AC
charger from the power socket.
CHARGING
※ Please don't plug in and pull out the AC charger frequently while charging,to
avoid the shortening life time of the bluetooth headset
※ the battery status indication will be displayed in IOS system,you can charge the
headset according to the battery indication when you are using Apple IOS system
devices.
1 How to turn on the bluetooth headset?
While the headset is in turned-off status,long press the multifunction button
for about 4 seconds,the blue indicator flashes 4 times along with the voice
prompt'Thank you for choosing Cannice products',after this the bluetooth
headset is turned on and will be in standby status.
TURN ON OR TURN OFF THE HEADSET
※ Ensure there is enough power before using the bluetooth headset.
2 How to turn off the bluetooth headset?
While the headset is in turned-on status,long press the multifunction button
for about 4 seconds,the red indicator flashes 1 time along with the voice prompt
'Thank you for using Cannice products',after this the bluetooth headset is turned
off and will be in turned-off status.

Pairing program allows the encrypted wireless connection between the 2
bluetooth devices and begin to communicate with each other.please make
sure the operating range of the 2 bluetooth devices within 20 meters before
pairing.
PAIR AND CONNECT TO THE BLUETOOTH HEADSET
How to pair?
Long press the multifunction button for about 7 seconds till the red and
blue indicators start flashing alternately,the bluetooth headset will be
paired successfully.the headset will be searchable within 2 minutes.
Enable the mobile phone bluetooth function and search for the bluetooth
headset(please refer to the mobile phone user manual)
Select the bluetooth headset displayed as iblue5s among the bluetooth
device list.
Please input 0000 to finish pairing if bluetooth PIN code is required.
After connection,there will be voice prompt 'your bluetooth headset has
been connected'
※ Your bluetooth headset will be disconnected if the headset is too far from the
device,and the voice prompt 'your headset has been disconnected' will be heard
in every 10 seconds.
※ No need to input the PIN code if the device support fast pairing function.
※ If the bluetooth headset is multipointed,please repeat the previous step if
you want to connect with the other bluetooth device.

BASIC OPERATION
Function
Operation LED status
Voice prompt
Explaination
Receive
a call
Short press any
key to answer
the call(about 1
second)
The red indicator
flashes
continuously
Phone
number voice
prompt after
short music
tone
End a
call
Press volumn+
and volumn -
button
simultaneously
or short press
multifunction
button for
one second
Or end the call with
the mobile device
—— ——
Reject
a call
Long press the
multifunction
button for about
3 seconds
With voice
prompt 'call
rejected'
With voice prompt
'you have missed call'
2 times in every 30
seconds after reject
a call
——
Voice
dial
Short press the
multifunction
button for about
1 second
With voice
prompt
'voice dial'
Short press the
multifunction button
under connected
standby status,then
speak the name that
correspond to the
number in the contact
list (mobile phone
voice dial function
support is required,
please refer to the
mobile phone user
manual )
——
Phone number voice
prompt for incoming
call

Last
number
redial
Double short
press the
multifunction
button within
about 1 second
With voice
prompt 'last
number
redial'
The mobile phone will
redial the last number
by double short press
the multifunction
button while in
connected status
——
Three-
way
calling
Three-way
calling
Double press the
multifunction button
to answer the new call
and hold the current
call during talking
—— ——
Reject
three-
way
calling
Long press the
multifunction
button
Reject the new call
during talking
—— ——
Call
transferred
to mobile
phones
or tablet
Long press the
multifunction
button for 2
seconds
Long press the
multifunction button
for about 2 seconds
to transfer the call to
the mobile phone and
disconnect with the
current bluetooth
headset.the headset
will be connected with
the mobile phone again
automatically after the
end of the call
—— ——
Slient
call
mode
Double short
press the
multifunction
button
continuously
With voice
prompt'your
bluetooth
headset has
switch to
slient mode'
Double short press
the multifunction
button to switch off
the headset
microphone, the
person on the other
end of the line can't
hear the voice then
——

Volume
up
Short press the
'+'volume
button during
the call
With voice
prompt
'volume up'
Short press the
volume + button to
increase the volume
step by step,until the
maximum volume
limit with the beep
indication.
——
Headset
hardware
reset
Press the
multifunction button
still and plug in the
AC charger when the
headset is turned on
The red indicator
keep lighting
When the headset is
turned on, press the
multifunction button
still and plug in the AC
charger
Volume
down
Short press'-'
volume button
during the call
With voice
prompt
'volume
down'
Short press the
volume - button to
decrease the volume
step by step,until the
minimum volume
limit with the beep
indication
——
——
Delete
the
matching
list
Press the volume +
and volume - button
simultaneously and
insert the charger
when the set is
power on
The matching list
will be deleted
—— ——

FAQ & SOLUTIONS
Q: Can the bluetooth headset be connected with the laptop,PC or PDA?
A: The device that support the bluetooth version and function can be
connected with the headset.
Notes: Please refer to the user manual of the laptop,PC and PDA devices.
Q: What devices will affect the quality of calls?
A: The quality of calls may be affected by the wireless devices, electrostatic
noise will occurs commonly,please keep the bluetooth headset away from the
radio waves electrical appliances,in order to prevent interference
Notes: Please be aware of the position of the devices making radio waves
during phone calls with bluetooth headset.
Q: Will my phone conversation be listened by other bluetooth mobile phones?
A: The radio-frequency power of bluetooth is far lower than regular mobile phone
signal power,so the bluetooth signal is hard to be monitored by the third party
device.Because after bluetooth headset connected with the mobile phone,a
secure connecting will be built between the headset and the device.
Q: How should I clean my bluetooth headset?
A: Please use dry and soft cloth to clean it.
Notes: Please keep the cloth dry and soft.

Q: The bluetooth headset can't be power on..
A: 1)the battery is empty.
2)the power on button press itn't long enough
Solution: 1)Charge the bluetooth headset with the charger.
2)Long press the multifuntion button for about 4 secs
Notes: 1)Charge the bluetooth headset for more than 2 hours.
2)Press the multifuntion button till the red and blue indicator flashes
alternately.
Q: The bluetooth headset can't be power off.
A: The bluetooth headset program errors occur by the incorrect operation.
Solution: Please refer to the step'headset hardware reset'in 'basic
operation'
Notes: Make sure the charging time not too long.
Q: The bluetooth headset can not be searched.
A: 1)Check if the bluetooth headset is power on. and searchable;
2)Errors with the device bluetooth program;
3)Check if the bluetooth headset near the radio wave devices.
Solution: 1)Please refer to 'Turn on or Turn off the headset'description to
reboot the headset;
2)Do not operate other programs when searching and connecting the
bluetooth headset with the mobile phone;
3)Keep the bluetooth headset and devices away from other radio
waves electrical devices.
Notes:1)Please be aware that the headset will turns into standby mode after 2
minutes if it doesn't pair with any devices when the bluetooth headset is
switched on.
2)Please reboot the mobile phone and search again.
3)Please be aware that radio waves electrical devices may affect the
operation.

BATTERY INFORMATION
1.The electricity of the Bluetooth headset is provided by the inner battery.
Do not connect the headset with the charger if unnecessary or fully charged.
overcharge will shorten the battery life. the headset power will release
automatically after fully charged with or without using. Do not put the headset in
the place where the temperature is too high or too low.For instance, leave the
headset in a locked car in summer.That will shorten its capacity and life.
※ 1. Keep the battery temperature between 15℃ and 25℃ otherwise too hot or too
cold may affect its performance. Do not throw it to fire to avoid explosion. Please
recycle the invalid batteries correctly.
Q: Some of the function descriped in user manual are not available.
A: Different connected devices have different functions.For instance,when
the bluetooth headset connected with PDA,and MP4 and other devices.If the
headset is multipointed,some functions may be unavailable.

Do not throw,impact,scrape,screw,hit or vibrate the headset,don't place
heavy things on it.
Keep the headset away from magnets,electronics and loudspeaker.
Keep the headset away from the extreme temperature(working
temperature range -10℃～45℃).
Keep the headset away from the moist environment.
Do not disassemble the bluetooth headset.
Touch the button smoothly.
Do not clean your headset with the corrosive cleanser.
NOTES & TIPS