CANNICE iblue 8 User manual

WIRELESS HEADSET
iblue8 INSTRUCTION

USB cableEarhook
Ear cap
Following items are included
Start here

1. Volume +
2. Volume -
3. Charging port
4. Status indicator light
5.
Product overview
1
2
4
3
5
Multifunction button

Basic operation
Volume control
Press the volume button "+" or "-" to turn volume up or down.
you hear "beep" voice prompts once reach the maximun volume,
you hear "toot" voice prompts once reach the minimun volume.
Status indicator
Instruction
Power on
Power off
Standby
Battery low
Incoming call
Pairing
LED status
Blue
Red twice
Blue once
every 8 seconds
Red once every
8 seconds
Red and Blue
simultaneously
Red and Blue
alternately
Charging Red while charging,
Blue once fully charged
Voice prompts
Power on
Power off
Paring
Battery low
/
/
Bell

Pairing
Pair one phone
搜 索
ON
Search
iblue8
Bluetooth
1.Press and hold the multifunction button about 4 to 7 seconds
to switch on the headset, it automatically enters the pairing
mode,the red and blue indicator lights flash alternately.
2.Activate the Bluetooth feature on your phone or other devices,
and set it to search for new Bluetooth devices.

3. Select "iblue8", if your phone asks, enter 0000(four zeros)
for the passcode or accept the connection. The indicator
light stops flashing red and blue once successfully paired.
iblue8
ON
iblue8
Bluetooth
Connect

Multipoint technology enables you to pair another phone and
take a call from either.
To pair with another mobile phone, follow the steps for "Pair
one phone". After pairing successfully, restart the headphone
to connect to 2 paired mobile phone automatically.
Pair another phone
连 接
iblue8
iblue8
ON
iblue8
ON
iblue8
Bluetooth
Connect
Bluetooth
Connect

Call
Answer a call
Press any key to answer the phone .
End a call
Press the multifunction button .
Reject a call
Press and hold any key for about 2 seconds to reject the phone.
Redial the last call
Double-press the multifunction button in standby mode.
The mobile phone will redial the last call number.
Automatic switch between music and calls
During a phone call, your music will pause. When the
call ends, music will resume playing.

End current call and answer new call
When a new call rings during a call, press the multifunction
button to answer new call and end current call simultaneously.
On hold current call and answer new call
When a new call rings during a call, double-press the
multifunction button to hold current call and answer new
call. To switch between held call and active call, double-
press the multifunction button.
Switch between the headphone and phone
Press the multifunction button for about 2 seconds to
switch between headphone and phone during a call.
Mute on/off
Press the volume button "-" for about 2 seconds to mute
on/off.
Voice dial (phone feature)
Press the volume button "+" and "-" for about 2 seconds

Music
(Need media player support)
Track back
Press volume button "-" for about 2 seconds, and the
previous song will be played.
Track forward
Press volume button "+" for about 2 seconds, and the next
song will be played.
Pause/Play
Press the multifunction button once to pause/play music.

More features
Charging
Clear paired list
To clear the pairing settings from the headset ,switch off the
headset and press and hold the multifunction and volume
adjust button for 5 seconds, then connect the headset to a
charger.
Hardware reset
To reset the headset. switch on the headset, press and hold
the multifunction button and connect the headset to a
charger, release the multifunction button after connection
with the charger for 2 seconds.
Connect the headset to a USB slot of PC using the supplied
micro-USB cable, it takes 1.5 hours to fully charge the headset,
the LED flashes red while charging, and LED flashes blue once
charging is complete.

Battery indicator
When the Headset is connected to a device with ios system, a
battery indicator will appear at the upper right of the system,
indicating battery status of the Headset.