Canon Color imageCLASS MF8170c Operating manual

Additions and Corrections
for the Basic Guide, Facsimile Guide and
Set-Up Instructions for the Machine
Please note the following additions and corrections for the pages listed below in each
manual.
Basic Guide
■P.2-22
"The Number of Output Sheets" of "face down" for "Plain Paper" and "Recycled Paper"
should be corrected as follows:
Incorrect Correct
approx. 100 sheets approx. 80 to 100 sheets
■P.5-3
The following IMPORTANT statement should be added:
IMPORTANT
When you make copies immediately after connecting the power cord, the print
quality may deteriorate. Make copies after making sure the sound of machine
operation stops.
■P.5-7
The following statements should be added in "Adjusting the Color Balance" section:
Please refer to this note when you use the color balance setting for color-copy.
Note : Adjustment on the monotone area have an instant effect on your imaging.
When the preview image is
yellow-looking.
When the preview image is
magenta-looking.
When the preview image is
cyan-looking.
When the preview image is
red-looking.
When the preview image is
green-looking.
When the preview image is
blue-looking.
Change the yellow to lower side, or change the
magenta and cyan to higher side.
Change the magenta to lower side, or change the
yellow and cyan to higher side.
Change the cyan to lower side, or change the yel-
low and magenta to higher side.
Change the yellow and magenta to lower side, or
change the cyan to higher side.
Change the yellow and cyan to lower side, or
change the magenta to higher side.
Change the magenta and cyan to lower side, or
change the yellow to higher side.

FA7-6870 (000) © CANON INC. 2004 PRINTED IN CHINA
■P.8-12
The following IMPORTANT statements should be added under step 13:
IMPORTANT
•When you make copies immediately after replacing a toner cartridge, the print
quality may deteriorate. Make copies after making sure the sound of machine
operation stops.
•When <INSERT * CARTRIDGE> still appears in the LCD after inserting a car-
tridge, disconnect and connect the power cord.
* Indicates either "C", "M", "Y", or "K".
■P.8-29
The following IMPORTANT statements should be added under step 7:
IMPORTANT
•When you make copies immediately after replacing the drum cartridge, the print
quality may deteriorate. Make copies after making sure the sound of machine
operation stops.
•When <INSERT DRUM> still appears in the LCD after inserting the cartridge,
disconnect and connect the power cord.
Facsimile Guide
■P.1-2
The "Directory key" and "Coded Dial key" in the illustration of "One-Touch Panel
Closed" should be switched as follows:
Set-Up Instructions for the Machine
■P. 5
Please refer to the following IMPORTANT statement before performing the step 5 on p.5:
IMPORTANT
When you install the toner cartridge "BLACK," follow the steps below:
1 Close the cartridge cover and lower the scanning platform.
2 Press [Menu] on the operation panel
z ; or :to select <10.MAINTENANCE> on the LCD zpress [Set].
3 Press ;or :to select <1.CHANGE CARTRIDGE> zpress [Set]
z<1.BLACK> z[Set].
4 Lift the scanning platform and open the cartridge cover zinstall the cartridge.
cCoded Dial key
Press [Coded Dial], followed by a two-digit
code to dial fax/telephone number registered
for coded speed dialing.
dDirectory key
Enables you to search for fax/telephone
numbers by the name under which they are
registered for speed dialing, and then use
the number for dialing.