Canon imageCLASS MF4350D User manual

Overview of Machine Functions
Set Up the Machine to Suit Your Purposes
Set Up the Machine
Make Fax Settings
Set Up Network Connection (MF4370dn Only)
Set Up Computers and Software
Appendix
Please read this guide before operating this product.
After you nish reading this guide, store it in a safe place for future reference.

Contents
Overview of Machine Functions .................................................................................................................... 1
Available Features ............................................................................................................................................................1
1Set Up the Machine to Suit Your Purposes .................................................................................................. 2
2Set Up the Machine.......................................................................................................................................... 3
Items Included with the Machine...............................................................................................................................3
MF4370dn................................................................................................................................................................................. 3
MF4350d ................................................................................................................................................................................... 3
Items for All Models .............................................................................................................................................................. 4
Installation Space................................................................................................................................................................... 4
Manuals for the Machine.....................................................................................................................................................5
Install Toner Cartridge.....................................................................................................................................................5
Set Up Paper Cassette and Load Paper..................................................................................................................... 8
For MF4370dn ......................................................................................................................................................................... 8
For MF4350d..........................................................................................................................................................................10
Connect Power Cord and Turn On the Machine..................................................................................................12
3 Make Fax Settings .......................................................................................................................................... 13
Connect Telephone Cables .........................................................................................................................................13
Register User Telephone Number and Unit Name .............................................................................................14
Information About the Keys.............................................................................................................................................14
About Sender Information ...............................................................................................................................................15
Set Date and Time ..........................................................................................................................................................16
Select the Receive Mode that Suits Your Needs ..................................................................................................17
About the Receive Modes.................................................................................................................................................17
If You Need to Use Pulse Dialing.....................................................................................................................................19
4 Set Up Network Connection (MF4370dn Only) ........................................................................................ 20
Connect the LAN Cable ................................................................................................................................................20
Compatible LAN Cables.....................................................................................................................................................20
Connect the Machine to Network ............................................................................................................................21
Specify the IP Address Settings .................................................................................................................................21
Automatic Setting................................................................................................................................................................21
Check IP Address Setting ..................................................................................................................................................21
Manual Setting......................................................................................................................................................................22
5 Set Up Computers and Software ................................................................................................................. 23
Types of Connection between Computers and the Machine.........................................................................23
Network Connection ..........................................................................................................................................................23
USB Connection....................................................................................................................................................................23
About User Software CD-ROM...................................................................................................................................24
Network Connection (MF4370dn Only) .................................................................................................................26
MF Drivers Installation .......................................................................................................................................................26
Color Network ScanGear Installation............................................................................................................................28
Check Installation ................................................................................................................................................................30
USB Connection ..............................................................................................................................................................31
MF Drivers & MF Toolbox Installation ...........................................................................................................................31
Check Installation ................................................................................................................................................................34
6 Appendix.......................................................................................................................................................... 35
User Manual CD-ROM (e-Manual) ............................................................................................................................35
System Requirements ........................................................................................................................................................35
Using the User Manual CD-ROM (e-Manual)..............................................................................................................36

1
Overview of Machine Functions
This manual describes how to set the required settings to set up the machine and install the software. After you
set up the machine, you can use the functions described in the illustration bellow.
For the details of each function, refer to the Basic Operation Guide and e-Manual.
Illustrations used in this manual are the model MF4370dn. When there is any dierence between MF4370dn and
MF4350d, it is clearly indicated in the text, e.g., “For MF4370dn.”
For information on the standard features for each model, see “Available Features,” shown below.
The display used in this manual is the factory preset display for the MF4370dn in default setting. Depending on
the system conguration and product purchased, the appearance of the display may dier.
Available Features
The table below shows the available features on a product basis.
: available
—: not available
COPY PRINT SCAN FAX Remote UI
(Network Board) Simplex ADF
imageCLASS
MF4370dn
imageCLASS
MF4350d —

2
1
Set Up the Machine to Suit Your Purposes
Determine which machine functions (Copy, Fax, Print, PC Print, PC Fax, Scan, Remote UI) you intend to use, and
make the settings according to the owchart below.
For example, when you use copy function only, follow “Required Settings.”When you use both copy and fax
functions, follow“Required Settings” and “Fax Settings.”
p. 5
p. 8
p. 12
p. 13
p. 14
p. 16
p. 17
p. 21
p. 21
p. 31
p. 32
p. 26
(See “Connect Telephone Cables,” on p. 13.)

3
2Set Up the Machine
Items Included with the Machine
MF4370dn
Machine●Dust Cover●Paper Cassette●
Document Feeder Tray●
MF4350d
Machine●Dust Cover (enclosed in the machine)●Document Feeder Tray●

2 Set Up the Machine
4
Items for All Models
Toner Cartridge●Power Cord●Telephone Cable●Destination Labels●
Starter Guide (This Document)
Basic Operation Guide
User Manual CD-ROM
User Software CD-ROM
Limited Warranty Notice
Registration Card
●
●
●
●
●
●
MF4370dn
MF4350d
●
●
Installation Space

2 Set Up the Machine
5
Install Toner Cartridge
This section describes the installation procedure for the toner cartridge.
Starter Guide (This Document):
The Starter Guide contains the machine setup and software installation. Read this guide before
operating this product.
Basic Operation Guide:
The Basic Operation Guide contains the basic operation features.
e-Manual (located on the User Manual CD-ROM):
The e-Manual is a web browser-based manual that you can see on your computer. This guide contains
total operation features. (Also includes the Starter Guide contents and the Basic Operation Guide
contents.)
●
●
●
Manuals for the Machine
1 Take out the bag of the toner cartridge from the
cushioning material.
2 Take out the toner cartridge from the bag.
Do not open the drum protective shutter (A).

6
2 Set Up the Machine
3 Gently rock the toner cartridge several times to
evenly distribute the toner inside.
4 Place the toner cartridge on a at surface and
pull the seal completely out.
Do not pull the seal out at an angle.
If toner is adhered on the removed seal, be careful that
your hands or clothes do not get dirty from touching the
toner.
If your hands or clothes get dirty from touching the toner,
wash them immediately in cold water. Do not use hot
water. If you do, the toner may be set permanently.
–
–
5 Hold the front side of the operation panel with
your hands.
6 Lift the scanning platform (A) until it is locked.
(You will hear an audible “click.”)
7 Hold the grip (A) on the right front side of the
toner cover.
8 Open the toner cover.
9 Hold the toner cartridge by its handle (A).

7
2 Set Up the Machine
10 Insert the toner cartridge so that the
protrusion on the right side of the toner
cartridge (A) ts into the guide (B) located on
the right side of the machine and slide it
down parallel to the guide.
11 Push the toner cartridge to make sure it is
properly set in the machine.
12 Hold the grip (A) on the right front side of the
toner cover.
13 Close the toner cover.
14 Lower the scanning platform.
Be careful not to get your ngers caught.
If you cannot close the toner cover, do not force it to
close. Open the cover and make sure the toner cartridge
is properly set in the machine.
–
–

8
2 Set Up the Machine
Set Up Paper Cassette and Load Paper
For MF4370dn
1 Align the guides (B) on the both edges of the
paper cassette to the protrusions (A) inside the
machine.
Install the paper cassette with the front end tilted upwards.
2 Push the paper cassette down until the hooks
(A) on both sides of the paper cassette engage
the protrusions (B) inside the machine.
3 Open the front panel of the paper cassette.
4 Slide out the paper guide rail (A).
5 Slide the side paper guides (A) to match the size
of paper.
If the paper guides do not t the size of the paper, the
printout may be skewed.
6 Fan the paper stack and even the edges.

9
2 Set Up the Machine
7 Load the paper into the paper cassette with the
print side up. Make sure the paper stack sits
below the small n (A) on the side paper guide.
8 Adjust the paper guide rail to match the size of
paper.
9 Close the front panel of the paper cassette.
To load Legal-size paper, leave the front panel of paper
cassette open and adjust the paper guide rail (A) for Legal-
size paper.
10 Match up the edge of the dust cover (A) and
the edge of the paper cassette (B), and place
the cover on top of the cassette.
11 Attach the document feeder tray on the
document feeder.
The default paper size/type is set to <LTR> and <PLAIN
PAPER> in the setting menu. When you load other size
and/or type of paper, change the paper size/type setting
by pressing [Paper Settings]. For details, see
“Introduction of the Machine,” in the e-Manual.
For loading paper in the multi-purpose tray, see
“Introduction of the Machine,” in the e-Manual.
If a printout falls out of the output tray, extend the output
tray extension on the front side of the machine and set
the paper stopper upright.
–
–
–

10
2 Set Up the Machine
For MF4350d
1 Open the paper feeding tray.
2 Take out the dust cover from inside the
machine.
3 Slide out the paper guide rail (A).
4 Slide the side paper guides (A) to match the size
of paper.
If the paper guides do not t the size of the paper, the
printout may be skewed.
5 Fan the paper stack and even the edges.
6 Load the paper into the paper feeding tray with
the print side up. Make sure the paper stack sits
below the hook (A) on the side paper guide.

11
2 Set Up the Machine
7 Adjust the paper guide rail to match the size of
paper.
8 Aligning the protrusions (A) on the both sides of
the dust cover to the guides (B) inside the
machine, set the dust cover.
9 Attach the document feeder tray on the
document feeder.
The default paper size/type is set to <LTR> and <PLAIN
PAPER> in the setting menu. When you load other size
and/or type of paper, change the paper size/type setting
by pressing [Paper Settings]. For details, see
“Introduction of the Machine,” in the e-Manual.
For loading paper in the multi-purpose tray, see
“Introduction of the Machine,” in the e-Manual.
If a printout falls out of the output tray, extend the output
tray extension on the front side of the machine and set
the paper stopper upright.
–
–
–

12
2 Set Up the Machine
1 Connect the power cord into the rear socket on
the back side of the machine and the wall
outlet, and press the [I] side of the main power
switch (A) to turn ON.
Do not connect the machine and the computer with a USB
cable at this time. Connect the machine and the computer
with a USB cable only during the software installation
procedure. (A USB cable is not used when the machine is
used via a network connection.)
2 The machine enters the standby mode.
T E X T / P H O T O 1
1 0 0 % L T R
The LCD display turned OFF:
The machine may enter the Sleep mode while you are performing setup. Press
[Energy Saver] to turn the display back ON and continue the setup.
<SET PAPER AGAIN/SET TONER AGAIN> is displayed:
Make sure that the toner cover and scanning platform are closed properly. (See
“Install Toner Cartridge,” on p. 5.)
<CLOSE COVER/TONER COVER> is displayed:
Check the installation of the toner cartridge and the placement of the paper.
(See “Install Toner Cartridge,” on p. 5 and “Set Up Paper Cassette and Load
Paper,” on p. 8.)
●
●
●
Connect Power Cord and Turn On the Machine

13
3Make Fax Settings
This section describes the fax settings.
Connect Telephone Cables
Connect the supplied telephone cable to the telephone line jack (A) on the back side of the machine and the wall jack.
If you want to connect your own external telephone or telephone with built-in answering machine, connect it to external
device jack (B) on the back side of the machine.
●
●

3 Make Fax Settings
14
Use the keys below to enter information in the machine.
You can enter the following characters in each input mode:
Use the – [numeric keys] to enter
characters.
Press – [numeric keys] repeatedly until
the required character appears.
Press [#] to enter symbols.
Press [ ] to switch between input modes:
[A]: Letter mode
[1]: Number mode
Press [ ] or [ ] to move the cursor
position.
Press [Clear] to delete the character at
the cursor position. Hold [Clear] to
delete the entire entry.
●
●
●
●
●
●
Register User Telephone Number and Unit Name
Before sending documents, you MUST register your fax number, unit name, and the current date and time in the
machine.
Information About the Keys

15
3 Make Fax Settings
The LCD display turned OFF:
The machine may enter the Sleep mode while you are performing setup. Press
[Energy Saver] to turn the display back ON and continue the setup.
1 Press [Menu].
2 Press [ ] or [ ] to select <5 FAX SETTINGS>,
then press [OK].
5 FAX SETTINGS
MENU
3 Press [ ] or [ ] to select <2 USER
SETTINGS>, then press [OK].
2 USER SETTINGS
FAX SETTINGS
4 Press [ ] or [ ] to select <1 UNIT
TELEPHONE #>, then press [OK].
1 UNIT TELEPHONE #
USER SETTINGS
5 Use the – [numeric keys] to enter your fax
number (up to 20 digits including spaces), then
press [OK]. (For information on how to enter
characters, see p. 14.)
UNIT TELEPHONE #
123XXXXXXX
Ex.
●
6 Press [ ] or [ ] to select <2 USER
SETTINGS>, then press [OK].
2 USER SETTINGS
FAX SETTINGS
7 Press [ ] or [ ] to select <2 UNIT NAME>,
then press [OK].
2 U N I T N A M E
USER SETTINGS
8 Use the – [numeric keys] to enter the unit
name (up to 32 characters) (your name,
company name, etc.), then press [OK]. (For
information on how to enter characters, see
p. 14.)
CANON
UNIT NAME
Ex.
9 Press [Stop/Reset] to return to the Standby
mode.
The sender information you register in the machine appears in the header of each page received by your
recipient.
About Sender Information

16
3 Make Fax Settings
Set Date and Time
Before using the machine, you MUST set the current date and time. The current date and time settings are used as
standard timer settings for functions that require them.
Entering Information
Use – [numeric keys] to enter numbers.
Press [ ] or [ ] to move the cursor position.
Press [OK] to conrm the entry.
Press [Clear] to delete entire entry.
●
‒
‒
‒
‒
The display turned OFF:
The machine may enter the Sleep mode while you are performing setup. Press
[Energy Saver] to turn the display back ON and continue the setup.
1 Press [Menu].
2 Press [ ] or [ ] to select <8 TIMER
SETTINGS>, then press [OK].
8 TIMER SETTINGS
MENU
3 Conrm that <1 DATE&TIME SETTING> is
displayed, then press [OK].
1 DATE&TIME SETTING
TIMER SETTINGS
●
4 Use – [numeric keys] to enter the date
(month/day/year) and time (in 24-hour format),
then press [OK].
1 5 : 5 0 0 7 3 1 ’ 0 8
DATE&TIME SETTING
Ex.
If you accidentally enter an incorrect number, press [ ] or
[] to move the cursor to the number that needs
correction and overwrite it.
5 Press [Stop] to return to the standby mode.
You can select one of the following three date formats in
<2 DATE TYPE SELECT>.
<MM/DD/YYYY>
<DD/MM YYYY>
<YYYY MM/DD>
By default, <4 DAYLIGHT SV. TIME> in the <8 TIMER
SETTINGS> menu is set to <OFF>.
If you want to set <4 DAYLIGHT SV. TIME> in the <8 TIMER
SETTINGS> menu to <ON>, see “Introduction of the
Machine,” in the e-Manual.
–
–
–

3 Make Fax Settings
17
Select the Receive Mode that Suits Your Needs
About the Receive Modes
<FaxOnly>
Receives faxes automatically. When you use only the fax function,
select this mode without connecting to the external telephone.
When Receiving FAX●
The machine receives
faxes automatically.
When Receiving VOICE CALL●
The machine does not
respond.
<FAX/TEL>
Automatically switches between fax and a voice call. The machine
receives faxes automatically and rings for voice calls.
When Receiving FAX●
The machine receives
faxes automatically.
When Receiving VOICE CALL●
The machine rings.
Answer the call.
<AnsMode>
Receives faxes automatically and routes voice calls to the telephone
with built-in answering machine.
When Receiving FAX●
The telephone with
built-in answering
machine rings and the
machine receives faxes
automatically.
When Receiving VOICE CALL●
The telephone with
built-in answering
machine rings and
records voice messages.
<MANUAL>
Rings for every call, whether it is fax or a voice call. For fax, you have
to manually activate the machine to receive the fax.
When Receiving FAX●
The external telephone rings.
To receive the fax, you can
either pick up the receiver
and press the [Start]
key, or press the
[Hook] key followed by
the [Start] key.
Alternatively, you can use
the remote reception
function through the
external telephone.
When Receiving VOICE CALL●
The external telephone
rings. Answer the call.
For details, see “Methods for Receiving Faxes,” of “Fax,” in the e-Manual and Chapter 5, “Introduction to Using Fax Functions,” of “Fax,”
in the Basic Operation Guide.

18
3 Make Fax Settings
The receive mode determines how the machine responds to incoming faxes and voice calls. Select the mode that
most suits your needs from the chart below. For more information about the receive modes, see“About the
Receive Modes,”on p. 17.
The remote reception function is useful when the receive mode is set to <MANUAL> and your machine is connected to an external
telephone. You can receive faxes by picking up the external telephone and pressing a two-digit remote reception ID (the default
setting is 25). For details, see “Fax,” in the e-Manual and Chapter 5, “Fax,” in the Basic Operation Guide.
Your telephone with built-in answering machine or answering machine must be connected directly to the machine to use
<AnsMode>. Make sure that the auto answering function of the telephone built-in answering or answering machine is activated.
(See “Connect Telephone Cables,” on p. 13.)
The external telephone must be connected to the machine to use <FAX/TEL> or <MANUAL>. (See “Connect Telephone Cables,” on
p. 13.)
By default, <FaxOnly> is selected in <RX MODE>. If an external telephone is connected to the machine and receives a fax or voice
call, the external telephone rings. You can answer voice calls while the external telephone is ringing.
To disable the incoming ring, press [Menu] →<FAX SETTINGS> →<RX SETTINGS> →<INCOMING RING>, then select <OFF>.
Voice mail is not supported with <Ans Mode>.
DRPD (Distinctive Ring Pattern Detection) service assigns two or more telephone numbers with distinctive ring patterns to a single
telephone line, allowing you to have both a fax number(s) and a telephone number(s), using only one telephone line. Your machine
automatically monitors incoming calls and the ring pattern, to let you know if the call is fax or voice call. Set the ring patterns
assigned by your telephone company for a fax or voice call. Contact your telephone company for information on availability.
–
–
–
–
–
–
–
The LCD display turned OFF:
The machine may enter the Sleep mode while you are performing setup. Press
[Energy Saver] to turn the display back ON and continue the setup.
1 Press [Menu].
2 Press [ ] or [ ] to select <5 FAX SETTINGS>,
then press [OK].
5 FAX SETTINGS
MENU
3 Press [ ] or [ ] to select <1 RX MODE>, then
press [OK].
1 R X M O D E
FAX SETTINGS
●
4 Press [ ] or [ ] to select the receive mode,
then press [OK].
F A X / T E L
RX MODE
5 Press [Stop/Reset] to return to the standby
mode.