Canon MF7280 - ImageCLASS B/W Laser Safety guide

CANON INC.
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
CANON U.S.A., INC.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
CANON CANADA INC.
6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada
CANON EUROPA N.V.
Bovenkerkerweg 59-61 1185 XB Amstelveen, The Netherlands
CANON FRANCE S.A.S
17, quai du Président Paul Doumer 92414 Courbevoie Cedex, France
CANON (U.K.) LTD.
Woodhatch, Reigate, Surrey, RH2 8BF, United Kingdom
CANON DEUTSCHLAND GmbH
Europark Fichtenhain A10, 47807 Krefeld, Germany
CANON ITALIA S.p.A.
Via Milano, 8 20097 San Donato Milanese (MI) Italy
CANON LATIN AMERICA, INC.
703 Waterford Way Suite 400, Miami, Florida 33126 U.S.A.
CANON AUSTRALIA PTY. LTD.
1 Thomas Holt Drive, North Ryde, Sydney, N.S.W. 2113, Australia
CANON CHINA CO., LTD.
15F, North Tower, Beijing Kerry Centre, 1 Guang Hua Road, Chao Yang District, 100020, Beijing, China
CANON SINGAPORE PTE. LTD.
1 HarbourFront Avenue #04-01 Keppel Bay Tower, Singapore 098632
CANON HONGKONG CO., LTD.
19/F., The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon, Hong Kong
FA7-8599 (000) © CANON INC. 2006 PRINTED IN JAPAN OR CHINA
ENG
Starter Guide
Please read this guide before operating this equipment.
After you finish reading this guide, store it in a safe place for future reference.

Set Up the Machine
Do You Have Everything?
Manuals for the Machine
●Starter Guide (This Document): Machine set-up and software installation
●Easy Operation Guide: Quick reference for basic operations
●Reference Guide: Basic operations and troubleshooting
●Copying Guide: Copying instructions
●Sending Guide: Sending instructions
●Facsimile Guide: Fax instructions
●Network Quick Start Guide: Setting up the network connection and installing the CD-ROM software
●Remote UI Guide: Remote user interface instructions
●Network Guide: Network connectivity and setup instructions
●PCL/UFR II Printer Guide: PCL/UFR II printer instructions
●PCL Driver Guide: PCL printer driver installation and instructions
●UFR II Driver Guide: UFR II printer driver installation and instructions
●Fax Driver Guide: Fax driver installation and instructions
Assistance:
If you have a problem with your machine and you cannot solve it by referring to the manuals listed above,
please contact our Canon Authorized Service Facilities or the Canon Customer Care Center at 1-800-
828-4040 between the hours of 8:00 A.M. to 8:00 P.M. EST Monday through Friday and 10:00 A.M. to
8:00 P.M. on Saturday.
Before Setting Up the Machine
●Remove all shipping tape on the machine.
●When carrying the machine, be sure that it
is carried by two or more people holding
the parts indicated below.
●The machine illustration may differ slightly
from your machine.
●Machine ●Cartridge
●Starter Guide
●Easy Operation Guide
●Reference Guide
●Copying Guide
●Sending Guide
●Facsimile Guide
●Network Quick Start Guide
●User Software CD (2 CDs)
●User Manual CD
●Limited Warranty Notice
●Cartridge Warranty Notice
●Registration Card
●Ferrite Core for USB Cable ●Ferrite Core for LAN Cable ●Document Size Label
●Paper Size Label
●Stamp Cartridge
●Tweezers
●Power Cord ●Telephone Cable
1 2

3
Install Cartridge
1
Remove the cartridge from the bag.
Keep the bag for future use.
2
Remove the short shipping tape.
3
Remove the packing materials.
4
Gently rock the cartridge several times to distribute
toner inside.
5
Pull out the seal completely.
NOTE
Do not pull out the seal at an angle.
6
Remove the long shipping tape.
7
Remove the protective cover.
8
Push the release button on the left cover of the
main unit to open the left cover.
9
Open the front cover.
10
Rotate the unlock lever until it clicks.
11
While grasping the handle of the cartridge holder,
pull the cartridge holder out of the machine until it
stops.
12
Hold the cartridge by its handle, then insert it into
the cartridge holder.
4

5
13
Push the cartridge holder into the machine as far
as it will go.
14
Rotate the lever to the locked position.
15
Close the front cover.
NOTE
Be careful not to get your fingers caught.
16
Gently close the left cover until it clicks.
NOTE
Be careful not to get your fingers caught.
Load Paper
1
Pull out the paper drawer until it stops.
2
Fan the paper stack and even the edges.
3
Push down the metal plate to lock.
4
Insert the paper stack print side up.
NOTE
If loading paper other than Letter, see Chapter 6,
“Routine Maintenance,” in the Reference Guide.
NOTE
Make sure the paper stack does not exceed the load limit
mark (A) and it is loaded under the hooks (B) on the
paper guides.
5
Push the paper drawer into the machine as far as it
will go.
NOTE
– Be careful not to get your fingers caught.
– For loading paper in the stack bypass, see Chapter 2,
“Basic Operations,” in the Reference Guide.
A
BB
6

7
Connect Telephone Cables Affix Labels
Connect the supplied telephone cable (A) to the line jack (B) and the wall jack.
Affix the supplied document size label to the
specified location.
1
Align the slide guide (A) to the document size mark
“A4/A3” (B).
2
Affix the document size label (A) to the feeder cover so
that both indicators (B and C) on the side guide and the
document size label are aligned properly, as shown on
the right.
B
AAB
BA
A4
A3
BC
8

9
Connect Power Cord
1
Connect the supplied power cord (A) into the
socket and the wall outlet.
2
Press the main power switch to ON (“I” side).
The Start Up screen is displayed until the machine
comes to the ready mode.
The Basic Features screen is displayed when the
machine is ready to scan.
What if...
●<Close the left or front cover.> is displayed:
Make sure that the left or front cover is closed properly.
(See “Install Cartridge,” on p. 3.)
●<Load paper.> is displayed:
Make sure that paper is loaded in the machine.
(See “Load Paper,” on p. 5.)
●<Insert the toner.> is displayed:
Make sure that the cartridge is installed properly.
(See “Install Cartridge,” on p. 3.)
A
10

11
Set the Machine for Sending Faxes
Things You Must Do Before Sending Faxes
Before sending a fax, you MUST register your fax number, user name, and the current date and time in the
machine.
The sender information you register in the machine appears in the header of each page received by your
recipient.
Use the keys both on the touch panel display and the control panel to register sender information.
●Press [Additional Functions] to specify additional functions.
●Use the numeric keys to enter characters.
●Press [Clear] to delete the entire entry.
●The settings screen for each function is shown on the touch panel display. Press the appropriate keys in
accordance with the messages displayed on this display.
Register Sender Information
1Press [Additional Functions]. 2Press [Timer Settings]. 3Press [Date & Time Settings]. 4Use the numeric keys to enter the date
(month/day/year) and time (in 24- hour
format), then press [OK].
Date
12/09 2005 FAX (404)XXX-XXXX
CANON SALES
0001/0001
Time Fax Number
Sender's
Name (TTI) Page Number
Sender Informatio
n
15:00
123
789
0
456
JKL MNO
COPY SEND
Error Power
GHI
PQRS
ABC
TUV
DEF
WXYZ
ON/OFF
Additional
Functions
Reset
Display
Contrast
Processing/
Data
Log In/Out Clear
Start
Serial No.
Stop
JKL MNO
[Additional Functions] [Clear]
Touch Panel Dis
p
la
y
Numeric Ke
y
s
12

5Press [Done]. 6Press [Communications Settings]. 7Press [User Settings] under <Fax Settings>. 8Press [Unit Telephone #].
9Use the numeric keys to enter your fax
number (up to 20 digits), then press [OK].
[Space]: Inserts a space between the area code and the
local fax number (optional).
[+]: Inserts a country code. Press [+] after the country code,
and before the fax number.
[Backspace]: Deletes the last number entered.
10 Press [Done]. 11 Press [TX Settings] under <Common
Settings>.
12 Press [Unit Name].
13 Use the numeric keys to enter the user
name (up to 24 characters), then press
[OK].
14 Press [Done] repeatedly to return to the
Basic Features screen.
13 14

Set the Telephone Line Type
1Press [Additional Functions]. 2Press [Communications Settings]. 3Press [User Settings] under <Fax Settings>. 4Press [Tel Line Type].
5Select the telephone line type, then press
[OK].
<Tone>: Tone dialing
<Pulse>: Pulse dialing
NOTE
If you do not know the type of telephone line you use,
contact your local telephone company.
6Press [Done] repeatedly to return to the
Basic Features screen.
15 16

Set the Machine for Network Usage
Connect the Machine to a Network
This machine has a USB connector and LAN connector. If the machine is connected to a network using a
LAN cable, you can use the machine as a network printer, or use functions such as the Internet fax function
which lets you send and receive faxes over the Internet.
1Attach the ferrite core (A) to the machine connection side of a LAN cable (B). Be sure to wind the cable
around the core once to prevent the core from sliding.
NOTE
The machine does not come with a LAN cable.
2Connect a Category 5 twisted pair LAN cable to the 10Base-T/100Base-TX port on the back of the
machine. Connect the other end of the cable to a network router or a hub.
NOTE
If you use the machine as a local printer, connect the machine directly to a computer using a USB cable.
(See “Install Driver Software,” on p. 21.)
Specify the IP Address Settings
An IP address must be specified in order to enable communication between the machine and
computer.
NOTE
Before performing the following procedure, make sure that the machine is turned on and connected to a network.
1Press [Additional Functions]. 2Press [System Settings].
A
B
Hub
Ethernet Cable
PC with
100Base-TX Connector
PC with
10Base-T Connector
1817