Canon PIXMA MX870 Series User manual

Setting Up Your MX870 In
Default Mode (Tel Priority Mode)
Without An Answering Machine
Next

Connecting The Phone Lines
NextPrevious

(Existing Phone Cord)
Wall Jack Hand Set
(Phone)
Fax to Phone Line Connection
NextPrevious 3
Before
After
(Phone Cord included with Canon printer)
Wall Jack
(Existing Phone Cord)
Hand Set
(Phone)

Fax to Phone Line Connection
NextPrevious 4
(Phone Cord included with Canon printer)
Wall Jack
(Existing Phone Cord)
Hand Set
(Phone)
•Plug the provided phone cord into the wall jack

Fax to Phone Line Connection
NextPrevious 5
(Phone Cord included with Canon printer)
Wall Jack
(Existing Phone Cord)
Hand Set
(Phone)
•Plug the provided phone cord into the “L” jack located on the rear of
the multifunction

Fax to Phone Line Connection
NextPrevious 6
(Phone Cord included with Canon printer)
Wall Jack
(Existing Phone Cord)
Hand Set
(Phone)
•Remove the white plug from the upper jack.

Fax to Phone Line Connection
NextPrevious 7
(Phone Cord included with Canon printer)
Wall Jack
(Existing Phone Cord)
Hand Set
(Phone)
•Plug the second phone cord into the jack marked with an image of
a “telephone” located on the rear of the multifunction.

Fax to Phone Line Connection
NextPrevious 8
(Phone Cord included with Canon printer)
Wall Jack
(Existing Phone Cord)
Hand Set
(Phone)
•Plug the second phone cord into the phone

Setting Up The Receive Mode
NextPrevious

Step 1
Turn on the MX870 by pressing the
ON button.
Step 2
Press the FAX button.
NextPrevious 10