Canon FPD-400D User manual

ご使用の前に必ずこの取扱説明書をお読みください。
なお、取扱説明書は必要に応じてご覧になれるように大切に保管してください。
Read this operation manual before using the product.
Keep the manual in place for future reference.
在使⽤本产品之前 ,请务必先仔细阅读本使⽤说明书。
请务必妥善保管好本书 ,以便⽇后能随时查阅。
请在充分理解内容的基础上 ,正确使⽤。
取扱説明書
OPERATION MANUAL
使⽤说明书
J/E/C
LENS ACCESSORY
镜头配件
FPD-400D
FOCUS DEMAND
电动聚焦控制器
FPM-420D
FOCUS POSITIONAL SERVO MODULE
电动聚焦位置伺服模块
FPD-400DFPM-420DJ-0819.inddi 2010/08/2016:06:19

ENGLISH VERSION
FPD-400DFPM-420DE-0819.inddi 2010/08/2016:08:48

FCC REGULATIONS
This device complies with Part 15B of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to Part 15B of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
Do not make any changes or modifications to the equipment unless
otherwise specified in the manual. If such changes or modifications
should be made, you could be required to stop operation of the equipment.
Canadian Radio Interference Regulations
This Class A digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
We, Canon Inc., in Japan and Canon Europa N. V., in The Netherlands,
confirm that the BCTV zoom lens accessory is conformity with the essential
requirements of EC Directive(s) by applying the following standards:
EN55103-1, and EN55103-2
Note:
a) Applicable Electromagnetic Environments:
E1 (residential), E2 (commercial and light industrial),
E3 (urban outdoors) and E4 (controlled EMC environment, ex. TV
studio).
b) Use of shielded cable is required to comply with limits specified by
above standards.
Dieses Produkt ist zum Gebrauch im Wohnbereich, Geschäfts- und
Gewerbebereich sowie in Kleinbetrieben vorgesehen.
FPD-400DFPM-420DE-0819.inddii 2010/08/2016:09:00

- 17 -
INTRODUCTION
Thank you for purchasing Canon’s TV Zoom Lens Accessories. These
instructions explain the functions and operation of these accessories, and they
outline the precautions to be heeded during the unit’s operation. Before use,
please read through and familiarize yourself with the instructions, and then keep
them in a safe place for future reference.
GENERAL DESCRIPTION
These accessories are used to perform remote focus operations.
FPD-400DFPM-420DE-0819.indd17 2010/08/2016:09:00

- 19 -
CONTENTS
GENERAL SAFETY INFORMATION ....................... 20
§1. CONFIGURATION........................................................ 25
§2. MOUNTING and CONNECTING.................................. 26
2-1. For digital “R” type and “R” type lenses only.....................26
2-2. For digital “A” type and “A” type lenses only .....................29
§3. OPERATION................................................................. 31
TECHNICAL DOCUMENTS: EXTERNAL VIEW AND
GENERAL CIRCUIT
DIAGRAM............................ 51
INDEX ................................................................................ 56
- MAJOR LENS TYPES EXPLAINED IN THIS MANUAL -
The classifications for the lens types explained in this manual are shown
below.
The “R” type lenses require conversion cable CC-1220, and the “A” type
lenses require conversion cable CC-0620 (both sold separately).
Type digital “R” Type digital “A”
Lens models
Type “R” Type “A”
KRSD
IRSD
WRSD
VRSD
KASD
IASD
WASD
VASD
KRS
IRS
WRS
VRS
KAS
IAS
WAS
VAS
FPD-400DFPM-420DE-0819.indd19 2010/08/2016:09:00

- 20 -
GENERAL SAFETY INFORMATION
The safety warnings and cautions provided on the product or in this operation
manual must be observed. Failure to observe warnings and cautions provided to
guard against hazards may result in injury or accident.
Read this operation manual carefully to familiarize yourself with its contents and
ensure that you can operate the product properly.
Also, store this manual in a safe place where it can easily be referenced
whenever required.
This operation manual uses the following symbols and terms to identify hazards
to protect you and others by aiming to prevent the occurrence of accidents.
WARNING
Indicates hazardous situations which, if not heeded,
may result in death or serious injury to you or other
persons.
CAUTION
Indicates hazardous situations which, if not heeded,
may result in minor or moderate injury to you or other
persons, or damages to your property.
(NOTE)
Emphasizes essential information which, if not
heeded, may render the product unworkable or cause
it to function improperly.
Also, provides helpful information for you operation.
FPD-400DFPM-420DE-0819.indd20 2010/08/2016:09:01

- 21 -
HANDLING THE PRODUCT
CAUTION
1. Do not drop the product when transporting it or when attaching or detaching
it to or from the camera head.
The product may fall, possibly causing injury.
2. Make sure all mountings a tightened securely. If any of these mountings
becomes loose, the product may fall, possibly causing injury.
3. Inspect all mountings periodically (about every 6 months to 1 year) to make
sure they are securely tightened, and tighten any loose portions.
Otherwise, the product may fall, possibly causing injury.
4. If it becomes necessary to repair this product, or to perform any operations
or adjustments not mentioned in this operation manual, contact Canon’s
representative or the dealer who originally supplied the lens.
(NOTE)
1. Protect the product from strong impacts of shocks. Striking or dropping the
lens may result in a malfunction.
2. This product is not completely waterproof, so avoid exposing it directly to
rain or snow.
When the product must be used in rain or snow, provisions should be made
to prevent the product from getting wet.
3. If the product is to be used in adverse environments, such as in a chemical
laden atmosphere, consult with Canon’s representative beforehand.
FPD-400DFPM-420DE-0819.indd21 2010/08/2016:09:01

- 22 -
DEALING WITH ABNORMALITIES
WARNING
1. Should any of the abnormalities described below occur, immediately unplug
the lens cable from the camera, and then contact Canon’s representative
or the dealer from whom you purchased the product.
• Smoke, unusual smells or unusual noise
• Entry of foreign objects (metals, liquids, etc.) inside the product
MAINTENANCE AND INSPECTION
WARNING
1. Unplug the lens cable and remove the lens from the camera, before
attempting to clean the lens.
Never use flammable substances such as benzene or thinner for cleaning,
as this may present a serious fire or electric shock hazard.
(NOTE)
1. Periodic inspection
A periodic inspection about once a year is recommended.
The inspection and maintenance interval depends on the operating
conditions, the frequency of use, and the environment. If required, overhaul
the lens.
STORAGE
(NOTE)
1. Moisture inside the product
If the product becomes damp because of use in fog, mist or drizzle, wipe
off the moisture with a soft dry cloth and seal the product together with an
efficient desiccant in a vinyl bag to remove moisture which has entered into
the interior.
FPD-400DFPM-420DE-0819.indd22 2010/08/2016:09:01

- 23 -
TO THE CUSTOMER
1. Canon shall bear no responsibility for damage resulting from improper
operation of this product by the customer.
2. Canon shall make no guarantees about the product quality, functions, or
operation manual and its marketability and suitability for the customer's
purpose.
3. Canon shall make no guarantees about the results obtained using this
product.
4. The product specifications, configuration, and appearance are subject to
change without prior notice.
5. For further information on repairs, maintenance, or adjustments not
mentioned in this operational manual, contact your Canon dealer or your
Canon sales representative.
6. Note that Canon may be unable to undertake servicing or repair of a product
if it is modified without consulting Canon or your Canon sales representative.
CANON INC.
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
CANON EUROPA N.V.
Bovenkerkerweg 59-61, 1185 XB Amstelveen, The Netherlands
All rights reserved. No part of this operation manual may be reproduced or
copied in any form or by any means without the written permission of Canon Inc.
FPD-400DFPM-420DE-0819.indd23 2010/08/2016:09:01

- 25 -
§1. CONFIGURATION
Make sure all of the following items are included in the packing box.
(If you find any item missing, please contact the dealer from whom you
purchased this product.)
(NOTE) : This operation manual describes the operation of both the
servo focus demand and focus positional servo module.
The focus positional servo module is required when the
servo focus demand is used with the digital “R” type and
“R” type lenses. (The focus positional servo module is not
necessary with the digital “A” type and “A” type lenses
since a focus servo module is already built in.) Note that
the focus characteristics curve selection function cannot
be used with the built-in focus module of the “A” type
lenses. Also, the product components below are grouped
according to the respective mechanism. If you find any
components missing, please contact the store where you
purchased the product.
FPD-400D product components
UNIT Q'TY
SERVO FOCUS DEMAND <FPD-400D>................................ 1
CLAMPER <CR-10>................................................................ 1
OPERATION MANUAL............................................................ 1
FPM-420D product components
UNIT Q’TY
FOCUS POSITIONAL SERVO MODULE <FPM-420D> ......... 1
OPERATION MANUAL............................................................ 1
(NOTE): Storing environment
Check the following points, and make sure the place where
the lens is stored satisfies the following conditions.
1. Store the lens only under the following ambient conditions.
Ambient temperature : -30°C to +60°C
Ambient humidity : up to 60%RH (no condensation)
2. Do not subject the product to strong physical shock or
vibration.
FPD-400DFPM-420DE-0819.indd25 2010/08/2016:09:01