Canon DP-V3120 User manual

• Beforeuse,besuretoreadthisguide,includingthesafetyandhandlingprecautions.
• Readingthisguidewillhelpyoulearntousethevideodisplayproperly.
• Storethisguidesafelysothatyoucanuseitinthefuture. English
Video Display Setup Guide

2
Table of Content
Introduction 3
SuppliedAccessories 3
Conventionsusedinthismanual 3
Trademarks 3
Important Usage Instructions 4
Safety Instructions and Handling Precautions 5
Names and functions of parts 8
Setting Up 10
Carryingthevideodisplay 10
PreventingfromTipping 10
MountingtheMainUnitonaStandorWall 11
Removing/attachingthestand 12
Attaching/detachingtheACPowerCordClamp(provided) 13
ConnectingtheMainUnittoInputDevices 14
TurningontheMainUnit'spower 15
BasicoperationstousetheOSDmenu 15
Main specifications/Performance 16
Dimensions 18
About the User Manual for the Display
• SetupGuide(thisdocument):Thisdescribestheitemsthatshouldbefollowedtoensurethedisplaycanbe
usedcorrectlyandsafely,andhowtoinstallandoperatethedisplay.Pleasereadbeforeusingthedisplay.
• OperationGuide(PDFelectronicmanual):Thisexplainsthefunctionsofthisdisplayandhowtosetitup.
PleasedownloadthisfromtheCanonwebsite.
https://www.usa.canon.com/internet/portal/us/home/support/
https://www.canon-europe.com/support/
https://www.canon.com.au/support
https://sg.canon/en/support

3
English
Introduction
ThankyouforpurchasingCanonVideoDisplay.Thisdeviceisacommercial-usedisplaycapableofsupportingawide
rangeofworkowsfromshooting,throughtoeditinginvideoproduction,forbothdigitalcinemaandbroadcasting.
Supplied Accessories
Thefollowingitemsaresuppliedwiththisproduct.Pleasecheckbeforeusing.
ACPowerCord ACPowerCordclamp
HC-01
SetupGuide
(thisdocument)
Conventions used in this manual
:Indicatesareferencepage.
Note:Indicatesanote.
Reference:Indicatesreferenceinformation.
CAUTION:Indicatesanitemyoumustobserve.
Trademarks
• HDMI,HDMIlogo,andHigh-DenitionMultimediaInterfacearetrademarksorregisteredtrademarksofHDMI
LicensingAdministrator,Inc.intheU.S.andothercountries.
• VESAisaregisteredtrademarkortrademarkofVideoElectronicsStandardsAssociationintheU.S.andother
countries.
• Otherproductandcompanynameshereinaretrademarksorregisteredtrademarksoftheirrespectiveowners.

4
ImportantUsageInstructions
For the customers in the U.S.A.
ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassAdigitaldevice,pursuanttoPart15of
theFCCRules.
Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferencewhentheequipmentis
operatedinacommercialenvironment.Thisequipmentgenerates,uses,andcanradiateradiofrequencyenergy
and,ifnotinstalledandusedinaccordancewiththeinstructionmanual,maycauseharmfulinterferencetoradio
communications.Operationofthisequipmentinaresidentialareaislikelytocauseharmfulinterferenceinwhichcase
theuserwillberequiredtocorrecttheinterferenceathisownexpense.
Donotmakeanychangesormodicationstotheequipmentunlessotherwisespeciedinthemanual.Ifsuchchanges
ormodicationsshouldbemade,youcouldberequiredtostopoperationoftheequipment.
UseofshieldedcableisrequiredtocomplywithclassAlimitsinSubpartBofPart15ofFCCRules.
ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)Thisdevice
maynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived,includinginterference
thatmaycauseundesiredoperation.
CanonU.S.AInc.
OneCanonPark,Melville,NY11747,U.S.A.
TelNo.(631)330-5000
For the customers in Canada
CANICES-3(A)/NMB-3(A)
For the customers in Europe
Warning;
ThisisaclassAproduct.Inadomesticenvironmentthisproductmaycauseradiointerferenceinwhichcasetheuser
mayberequiredtotakeadequatemeasures.
CANONINC.
30-2,Shimomaruko3-chome,Ohta-ku,Tokyo146-8501,Japan
CANONEUROPAN.V.
Bovenkerkerweg59,1185XBAmstelveen,TheNetherlands
OnlyforEuropeanUnionandEEA(Norway,IcelandandLiechtenstein)
Thissymbolindicatesthatthisproductisnottobedisposedofwithyourhouseholdwaste,
accordingtotheWEEEDirective(2012/19/EU)andnationallegislation.Thisproductshould
behandedovertoadesignatedcollectionpoint,e.g.,onanauthorizedone-for-onebasis
whenyoubuyanewsimilarproductortoanauthorizedcollectionsiteforrecyclingwaste
electricalandelectronicequipment(EEE).Improperhandlingofthistypeofwastecouldhave
apossiblenegativeimpactontheenvironmentandhumanhealthduetopotentiallyhazardous
substancesthataregenerallyassociatedwithEEE.Atthesametime,yourcooperationinthe
correctdisposalofthisproductwillcontributetotheeffectiveusageofnaturalresources.For
moreinformationaboutwhereyoucandropoffyourwasteequipmentforrecycling,please
contactyourlocalcityofce,wasteauthority,approvedWEEEschemeoryourhouseholdwaste
disposalservice.FormoreinformationregardingreturnandrecyclingofWEEEproducts,please
visitwww.canon-europe.com/weee.

5
English
SafetyInstructionsandHandlingPrecautions
Besuretoreadtheseinstructionsinordertooperate
theproductsafely.
Followtheseinstructionstopreventinjuryorharmtothe
operatoroftheproductorothers.
WARNING
Denotestheriskofseriousinjuryordeath.
•Do not disassemble or modify the video display.
Inside,thevideodisplaycontainshigh-voltage/extremely
hot/movablepartsthatcancausere,electricshock,
burnsorinjury.
•Do not insert foreign objects or liquids into the
video display.
Ifmetallicobjects,ammableobjectsorliquidsget
insidethevideodisplay,thismaycausere,electric
shockormalfunction.
•Be sure to use the correct voltage.
Usingapowersourcewithavoltageotherthanthat
speciedinthisinstructionmanualcancausereor
electricshock.
Alwaysusethesupplied(orspecied)ACpowercord.
Foryoursafety,donotusethisACpowercordto
powerotherequipment.
•Do not use the video display in the following
places.
Doingsocancausere,electricshockormalfunction.
-Closetoawindowwhenitisrainingorsnowing.
-Placessubjecttohighhumidityanddust.
-Placesexposedtowaterandmoisturesuchas
bathrooms,kitchensetc.
-Placesdirectlyexposedtodust,smokeorsteam,
ornearbyheatersandhumidiers.
-Placeswhereammablegasesmaybepresent.
-Placesexposedtodirectsunlight.
•Do not install or store the video display in places
exposed to direct sunlight.
Thevideodisplay'sinternaltemperaturecanriseand
causereormalfunction.
•Do not damage the power cord.
Donotplaceheavyobjectsonthepowercordanddo
notpull,modify,heatortiethepowercordinabundle.
Thepowercordmaybedamaged(exposedorbroken
wires,etc.)andcausereorelectricshock.
•When using three-pronged plugs with a ground
connection:
Alwaysconnectthegroundprong.
Ashortcircuitoccurringwhenthegroundprongisnot
connectedcancausereorelectricshock.
Thevideodisplay'spowercablefeaturesathree-
prongedplug.
•Do not touch the power cable or plug during
lightning storms.
Thiscancauseelectricshock.
•Do not touch the power cable or plug with wet
hands.
Thiscancauseelectricshock.
•Observe the following precautions regarding the
power source and power plug.
Failingtodosocancausereorelectricshock.
-Insertthepowerplugfullyandsecurelyintothe
poweroutlet.Donotuseadamagedpowercable
orplugoraloosepoweroutlet.
-Holdtheplugitselfwhenunpluggingthepower
cable.Pullingthepowercordcandamagethe
powercordandcausereorelectricshock.
-Periodicallyremoveanydustbuildupfromthe
powerplug.
-Donotobstructtheaccesstothepowerplugby
placingotherobjectsaroundit.
-Donotconnectmanypowercordstothesame
poweroutlet.
-Whenusinganextensioncable,makesurethetotal
powerconsumptionofthedevicesyouconnect
totheextensioncabledoesnotexceeditsrated
power.
•If the video display was dropped or exposed to a
strong impact, turn it off immediately and unplug
the power plug.
Thevideodisplayisaprecisioninstrumentand
continueduseinsuchcasecanresultinashortcircuit
andcausereorelectricshock.
•Before starting any maintenance work, turn off the
video display and unplug the power plug.
Failingtodosocancauseelectricshock.
•In any case of unusual circumstances such as the
presence of smoke or abnormal sounds or smell,
immediately turn off the video display and unplug
the power plug.
Continuedusecancausereorelectricshock.

Safety Instructions and Handling Precautions
6
•Before moving, installing, removing or connecting
the video display to peripheral devices, turn off
the video display and all connected devices and
unplug their power plugs.
Failingtodosocancausere,electricshockor
malfunction.
•For your safety, unplug the power plug from the
power outlet when not using the video display for
extended periods of time.
Dustbuilduponthepowerplugcancausere.
•Do not obstruct the access to the power plug so it
can always be easily unplugged.
Failingtodisconnectthepowerplugimmediatelyafter
unusualcircumstanceshaveoccurredcancausereor
electricshock.
•Do not block the ventilation holes.
Blockingthevideodisplay'sventholescanresultinthe
internaltemperaturerisingandcausereormalfunction.
Observethefollowingprecautionstoensureproper
ventilation.
-Donotpushthevideodisplayintonarrowconned
spacesorenclosures.
-Donotwrapthevideodisplayinclothorother
materials.
-Donotplacethevideodisplayfacingup,layit
sidewaysorupside-down.
•If the screen is damaged, do not touch the leaking
liquid crystal or other internal liquids.
IftheLCDpanelisdamagedandliquidcrystalorother
internalliquidsleakout,donotputtheliquidsinthe
mouth,inhaleorswallowitorletitcomeincontactwith
theskin.Iftheliquidsgetintheeyeormouth,washit
immediatelywithplentyofwater.Iftheliquidscomein
contactwiththeskinorclothes,wipethemimmediately
withalcoholetc.andwashtheexposedareawith
soap.Leavingtheliquidsuntreatedcancauseinjuryor
damage.
•Use the carrying handle to carry the video display.
Whencarryingthevideodisplay,besuretoholditby
thecarryinghandle.Failuretodosocouldcausethe
displaytofallandcauseaninjury.
•Keep all packaging material out of the reach of
children.
Packagingmaterialtightlywrappedaroundsomeone's
headcanresultinstrangulationorsuffocation.
CAUTION
Denotestheriskofinjury.
•Do not place any objects on the video display and
do not climb on it.
Thevideodisplaycantiporfallandcauseinjury.
•Do not install the video display on an unstable
surface.
Installingthevideodisplayonawobblyorslanted
surfacecancausethedisplaytotiporfallandcause
injury.Thoroughlycheckalsothestrengthand
sturdinessofthesurfacewherethevideodisplaywillbe
placedorinstalled.
•When unpacking, carrying, installing, or
connecting the main unit, at least two people are
required.
Thevideodisplaycantiporfallandcauseinjury.
•Take precautions to prevent the video display from
tipping or falling.
Inanearthquakethevideodisplaycantiporfall.For
yoursafety,wheninstallingthevideodisplayonaTV
standorotherfurniture,takeprecautionarymeasuresto
securethevideodisplayagainsttippingorfalling.Taking
suchmeasurescanbeeffectiveinreducingtheriskof
injuryordamagebuttheeffectivenessoftheprevention
measurescannotbeguaranteedinallearthquakes.
•Follow the procedure in this manual to install the
video display.
Iftheinstallationisnotperformedcorrectly,thevideo
displaymaytiltorfallandcauseinjury.
•Inspect the condition of the installation about
once per year.
Aninadequatettingormountingcancausethevideo
displaytofallandcauseinjury.
•When using headphones, set the volume at a safe
level.
Listeningthroughheadphonesatahighvolumecan
harmyourhearing.
•Do not look at the screen for long periods of time.
Doingsocancauseconditionssuchaseyestrainor
decreasedvision.Whenlookingatthescreenforlong
periodsoftime,restperiodically.Ifyoufeeldiscomfort
aftercontinuedusage,stopusingthevideodisplay
immediatelyandrest.Ifyoucontinuetofeeldiscomfort,
consultaphysician.

Safety Instructions and Handling Precautions
7
English
When Using the Main Unit
• Thescreenmaybedamagedifitisleftfacing
strongsourceoflight.Pleasetakeprecautions
whenplacingitnearawindow.
• Donotpressrmlyonthescreen,scratchitor
placeanobjectonthescreen.Itcancausenon-
uniformityordamagetothepanel.
• Thescreenandcabinetmaybecomewarmduring
use.Notethisdoesnotconstituteamalfunction.
• Viewingthedisplayforprolongedperiodsoftime
mayleadtoeyestrainordecreasedvision.Please
ensuretotakerestperiodicallytoavoidthese
symptoms.
• RefertoRecommendationITU-RBT.1702
"Guidanceforthereductionofphotosensitive
epilepticseizurescausedbytelevision"andrelated
guidelines.
About Backlight
Thebacklighthasalimitedservicelifesoitsbrightness
maydegradeandcolormaychangeduetoaging.
About Temporary Screen burn-in
Ifastationaryimageisdisplayedforaprolongedperiod,
screenburn-inmayoccurwhereyouseeremnantsof
whatwasdisplayed.ThisisacharacteristicofLCDand
isnotafailure.However,thisisonlytemporaryandwill
disappearwhenplayingvideo.
About the LCD screen
Thescreenisproducedusingextremelyhigh-precision
manufacturingtechniques,withmorethan99.99%of
thepixelsoperatingtospecication.Lessthan0.01%of
thepixelsmayoccasionallymisreorappearasblack,
red,blueorgreendots.Inaddition,thistendencymay
increasethroughlongtermuseduetocharacteristicof
theLCDpanel.Thesedonotconstituteamalfunction.
Condensation
Ifthisequipmentisbroughtintoawarmroomwhileit
iscoldoriftheroomisheatedsuddenly,condensation
mayformonthesurfaceorinsidetheequipment.Note
thattheequipmentmaybedamagedifitisusedunder
suchcondition.
Ifcondensationhasformedonthesurfaceorinside
theequipment,donotusethevideodisplayasitmay
getdamaged.Turnthepoweroffandwaituntilthe
condensationhasevaporatedbeforeusingthevideo
display.
Cleaning
• Beforecleaning,besuretounplugthepowerplug.
• Thescreenhasaspecialsurfacetreatment,avoid
touchingitdirectlywithyourhand.Inaddition,
neverafxadhesiveobjectssuchasseals.
• Neverusealcoholorbenzene,thinner,acidic
cleaningsolution,alkalinecleaningsolution,
abrasiveorchemicalwipesbecausethesewill
damagethescreen.
• Ifthescreenisdirty,wipegentlywithsoftdrycloth
suchascleaningclothoreyeglassescleaning
cloth.Wipingthescreentoohardmaycause
unevennessonthescreenordamagetheLCD
panel.Thescreenmaybescratchedifwipedtoo
hardwithacleaningclothwithforeignparticles
attached.
• Whenthescreenisextremelydirty,wipewith
softclothsuchascleaningclothoreyeglasses
cleaningclothmoistenedwithwater-dilutedneutral
detergent.
• Useablowertoremovedustfromthesurfaceof
thescreen.
• Wipedirtoncabinetwithasoftcloth.Ifthescreen
isverydirty,useamoistenedclothwithwater
ormilddetergentdilutedwithwater.Donotuse
alcohol,benzene,paintthinner,orpesticides
astheymaydamagethesurfacenishorerase
charactersonthecabinet.
Disposing
• Donotdisposetogetherwithnormalwaste.Donot
includethevideodisplayinwastethatwillbetaken
tolandll.
• Observetherulesandregulationsofyourlocal
authoritieswhendisposing.

8
Namesandfunctionsofparts
Front face of the main unit
1 1
895432 6 7
1 Frontstand
2 Channel(CH)buttonCH1toCH3
• Youcanswitchbetweentheregisteredchannels
(settingsrelatedtoinputsignal)withasinglepush.
3
CDLbutton
• SwitchestoCDLmode.
4 Function(F)buttonF1toF8
• Registeredfunctionsareexecutedwithasinglepush.
5 MENUbutton,jogdial,RESETbutton
• ChangestheOSDmenusettings.
6 (Power)button
• Turnsthepoweronandoff.
7 Powerindicator
8
USBport
• ForconnectingUSBmemories,HUBs,colorgrading
controllers(TangentWave'sElement-Tk),orwireless
LANdevices(Wi-Fiadapters).
9 Headphoneterminal
About the power indicator
Displaysthestatusofthemainunit.Thepowerindicatorwillashduringrmwareupdatesorwhenanerroris
detectedevenifitissetto[Off].
Off:whenpowersupplyisnotconnected
Greenlit:whenapowersupplyisconnectedandthevideodisplay'spowerison
Greenash:duringcalibrationorrmwareupdate
Amberlit:duringstandby(powersupplyisconnectedandthepowertothevideodisplayisoff)
Amberash:whenerrorisdetected

Names and functions of parts
9
English
Back face of the main unit
Af
Ad
Aj Ak
Aq Aq
Aa
Ag
Ah
As
Aq Carryinghandle
Aa Rearstand
As
SDIoutputterminal
• PassesthroughoutputofthesignalinputtoAd.
Ad SDIinputterminal
• InputstheSDIsignal.
Af
REMOTEterminal
• Connectsanexternalcontroldevice.
Ag
LAN(10/100BASE)terminal
• ConnectsanexternalcontroldeviceorCanondisplay.
Ah Cordclampmountinghole
Aj ACpowerinputterminal
Ak HDMIinputterminal
• InputstheHDMIsignal.
CAUTION
• DonotusetheHUBwhenconnectingawirelessLANadapter(Wi-Fiadapter)toaUSBterminal.Thevideodisplaymaynotwork.
• Forsafety,donotconnectanyconnectorthatmayhaveexcessivevoltagetotheterminalofthevideodisplaywhenconnecting
peripheraldevices.
• PassthroughSD-SDIsignalsarenotoutputcorrectly.
Note
• AboutUSBMemory
-BothFAT16andFAT32USBmemorydevicesaresupported.
-CorrectoperationcannotbeguaranteedforallUSBmemorydevices.
-Itmaytake10secondsormorefortheUSBmemorytoberecognized.IfthefunctiontosavedataonaUSBmemoryis
executedduringrecognition,themessage[DetectingUSBmemory]isdisplayed.

10
Setting Up
Carrying the video display
When carrying the video display, be sure to hold it by the carrying handle.
CAUTION
• When unpacking, carrying, installing, or connecting the main unit, please note that at
least two people are required.
• When carrying the video display, handle it carefully so not to touch or damage the
screen.
Preventing from Tipping
CAUTION
• When securing the main unit to a table or desk, please ensure the table or desk is strong enough to carry the weight of the main
unit.
• For safety, make sure to perform this step with at least two people.
• Avoid touching the screen during this step as it may damage it.
• For safety reasons, when using the display for extended periods of time in a situation where it is subject to vibrations, shocks, or
is tilted (when moving in a live broadcast vehicle, etc.), take additional measures to ensure the display remains fixed, such as the
use of the screw holes on the stand or rear.
Use correct size screws that fit the screw holes on the stand to fasten it to a desk or table
Screw hole
4- 4.5 Unit: mm

Setting Up
11
English
Use a commercially-available belt or strap to fasten it to a wall or other surface
1 Pass a strong, commercially-available belt or strap through both carrying handles on the rear side.
2 Fasten the tips of the belt or strap to a floor or wall.
Commercially-availablebeltorstrap
Mounting the Main Unit on a Stand or Wall
Thismainunitcanbettedtoastand*ortoawallmountbracket*.Removethestandsbeforehand( 12).
*Commerciallyavailable.
CAUTION
• Forsafety,makesuretoperformthisstepwithatleasttwopeople.
• Makesurethatthemainunitdoesnotfallduringinstallation/removal.
• Avoidtouchingthescreenduringthisstepasitmaydamageit.
• Whenmountingthemainunitonawall,makesurethewallhassufcientstrength.Ifnecessary,applyreinforcement.Also,make
suretochecktheloadcapacityofthestandorwallmountbracket.
• Whenthevideodisplayisplacedonarackordisplaystandandventilationarounditisblockedbyequipmentplacedaboveor
beloworinasurroundingarea,theoperatingtemperaturemayincrease,causingafailureoroverheating.Inordertomaintainthe
operatingtemperatureconditionofthevideodisplay(5˚Cto35˚C),makespaceofatleast1U(4.4cm)aboveandbelowandat
least4cm(1.6in.)spacefromitsback.Makesufcientspacefromperipheralequipment,securevents,orinstallaventilationfan.
• Wheninstallingthevideodisplayonawall,makesufcientspacefromthewallsothatcablesarenotsqueezedortwisted.
1 Attach a commercially available stand or wall mount bracket using the screw holes on the back or side
face of the main unit.
Rear
4-M6
Depth8(Max.)
Unit:mm

Setting Up
12
Removing/attaching the stand
Thestandcanberemovedwhenstoringthedisplayonarackordisplayshelf.
CAUTION
• Makesuretoperformthisstepwithatleasttwopeople.
• Useaat,clearsurfacewhenattaching/detachingthestands.
• Thedisplaycantipoverifthestandhasnotbeenattached.
• Avoidtouchingthescreenduringthisstepasitmaydamageit.
Detaching
1 Place the display with the screen facing down on a soft cloth or cushioning material that is larger than the
display.
2 Front stands (2): Remove the screws holding the stands (2 each).
Rear stands (4): Remove the screws holding the stands (1 each).
•Donotlosetheremovedscrews.Donotusethesescrewsforotherpurposes.
Attaching
1 Place the display with the screen facing down on a soft cloth or cushioning material that is larger than the
display.
2 Align the position of the stand and screw hole on the video display.
•Alighttheconvexpartofthestandandconcavepartofthevideodisplay.
3 Front stands (2): Fasten the screws holding the stands (2 each).
Rear stands (4): Fasten the screws holding the stands (1 each).
Rear
Screenside
Rearstand
Frontstand
mountingscrewhole
Mountingscrew
Concavepart
Convexpart
Concavepart
Convexpart
Frontstand

Setting Up
13
English
Attaching/detaching the AC Power Cord Clamp (provided)
Attaching
InstalltheACpowercordclampbeforeconnectingtheACpowercordtothemainunit.
1 Insert the AC power cord clamp connector into the cord clamp
mounting hole (1).
2 Connect the AC power cord to the main unit (2).
3 Secure the AC power cord in place with the holder (3).
•Theholdershouldalwaysbefastenedinthepositionasshowninthe
illustration.
4 Press the holder against the main unit (4).
•Makesurethatthereisnoslack(A).
•Pullingtheholderlockleverinthedirectionofthearrowwillallowyouto
adjusttheholderposition(5).
Detaching
1 Pull the holder lever in the direction of the arrow (6) and remove the
AC power cord clamp from the AC power cord.
2 Press the knobs on the left and right and pull out the AC power cord
clamp from the video display (7).
2
1
3
4
A
5
6
7

Setting Up
14
Connecting the Main Unit to Input Devices
The video display has SDI and HDMI input terminals to connect input devices.
CAUTION
• Check that the power to the video display and input devices is switched off before connecting an input device to this display's SDI
or HDMI input terminal.
• Use a HDMI cable with the High Speed logo that complies with the HDMI standard. When a non-compliant HDMI standard cable
is used, the video display may not work normally, for example, video becomes choppy or nothing is displayed.
Reference
• The connection is tested using D5.5UHDC03E BNC cables manufactured by Canare Electric Co.
• When 3G-SDI RAW signal frequency exceeds 30.00P, it becomes a dual connection.
• Each input terminal is compatible with through output. When signals are input from Input (IN) A, connect the cable to the SDI (OUT)
terminal of Input A.
SDI input terminal
HDMI input terminal
■Signals that can be connected to the SDI input terminal
Input signal Input terminal
Quad Link
(Square Division)
12G/6G/3G/
HD-SDI
Top left, Mapping signal Input A
Single input system
Top right, Mapping signal Input B
Bottom left, Mapping signal Input C
Bottom right, Mapping signal Input D
Quad Link
(2 Sample Interleave)
3G-SDI Link 1 Input A
Single input system
Link 2 Input B
Link 3 Input C
Link 4 Input D
Dual Link 6G/3G-SDI Link 1 Input A
Two input systems
Link 2 Input B
Link 1 Input C
Link 2 Input D
Single Link 12G/6G/3G/HD/
SD-SDI —Input A/Input B/
Input C/Input D Four input systems

Setting Up
15
English
Turning on the Main Unit's power
1 Plug the provided AC power cord to the AC power supply input terminal at the rear.
•Thevideodisplaygoesintostandbyandthepowerindicatorlightsupinamber.
2 Press the power supply button at the front.
•Thepowerindicatorlightsgreen.
Note
• Warming-upisnecessarytostabilizethebrightnessofthevideodisplay.Waitatleast10minutesafterturningonthepowerbefore
use.
Basic operations to use the OSD menu
ThevideodisplaysettingsarechangedfromtheOSDmenu.Usingbuttonsandjogdialonthevideodisplay,youcan
adjustimagequalityandconguresettingsforinputsignals.
MENUbutton
Opens/closestheOSD
menu,ormovesupone
levelinamenu.
RESETbutton
Resetstheitemstobeadjustedusingthesliderand
enteredcharacters.
Jogdial
orrotation:Usedtomovetoadifferentitemandchange
settings.
Press:Conrmssettingsormovestheselectionframeup/down1level.

16
Mainspecications/Performance
Panel
PanelType IPSLCDpanel
ScreenSize 31.1inch(78.91cm)
AspectRatio 17:9
Resolution 4096x2160
ActiveDisplayArea Approximately698.0x368.1mm
PixelPitch 170µm
Image quality
Brightness* Standard 100cd/m2
Peak,Fullscreen
white
2000cd/m2
ViewAngle(Up,Down,Left,Right) 89°(contrastratio10:1orhigher)
SurfaceTreatment Anti-glarecoating
General
BacklightType LED,directdowntype
Power RatedVoltage:100–240VACRatedFrequency:50/60Hz
Powerconsumption
Atmaximumload(includingchangeinbrightnessthroughaging):Approximately840W
Atfactoryshipment:Approximately175W
Environmental
Conditions
Operating
Temperatureandhumidity
:5–35°C(41–95°F),20–85%RH(nocondensation)
Recommendedrangeoftemperatureandhumidity:15–
30˚C(59–86°F)(20to80%RH,nocondensation)
Pressure:700–1060hPa
Storage/
Transporting
Temperatureandhumidity
:-20–40˚C(-4–104°F),10–85%RH(nocondensation)
41–60˚C(105–140°F),10–30%RH(nocondensation)
Pressure:700–1060hPa
Dimensions(widthxheightxdepth) Includingstandsandhandle:Approx.749×492×335mm(29.5×19.4×13.2in.)
Mainunitonly,excludingprotrusions:Approx.749×470×295mm(29.5×18.5×11.6in.)
Weight Approximately31kg(68.2lb)
MountingHolePitch VESAstandard200x200mm(7.9×7.9in.)
*Brightnessvaluesarestandardvaluesandnotguaranteedvalues.

Main specifications/Performance
17
English
Interface
Input 12G/6G/3G/HD/
SD-SDI
4 BNC (75Ω) receptacle terminal
12G-SDI: Compliant with SMPTE 2082
6G-SDI: Compliant with SMPTE 2081
3G-SDI: Compliant with SMPTE 2048-2/274M/296/372/425-5/425-3/425-1/
428-19/428-9
HD-SDI: Compliant with SMPTE 2048-2/274M/292-1/296/428-19/428-9
SD-SDI: Compliant with SMPTE 259M
HDMI 1 type A terminal Contents protection standard: HDCP 2.2
Output 12G/6G/3G/HD-SDI 4 (pass-thru)
Head phone 1 stereo mini jack, Supported impedance: 32 Ωto 64 Ω
Others USB 1 USB A receptacle terminal
Universal Serial Bus Specification Revision 2.0 compliant LS (Low Speed)/FS (Full
Speed)/HS (High Speed) mode compatible
Compliant with Enhanced Host Controller Interface Specification for Universal Serial
Bus Revision 1.0
LAN 1 RJ-45 terminal
Compliant with IEEE802.3 10BASE-TX/IEEE802.3u 100BASE-TX
REMOTE 1 RJ-45 terminal, GPI 8 pins
Weight and dimensions are approximate. Errors and omissions excepted.
The information in this document is verified as of August 2019. Subject to change without notice.

Main specifications/Performance
18
Dimensions
615 (24.2)
749 (29.5)
470 (18.5)
492 (19.4)
200 (7.9)
200 (7.9)
615 (24.2)
121.5
(4.8)
281.5 (11.1)
161.7 (6.4)
21.1 (0.8)
112.5
(4.4)
15 (0.6)
4-M6
Depth 8 (0.3) (Max.)
Center of panel
4- 4.5 (0.2)
25.3 (1.0)
335 (13.2)
295 (11.6)
Unit:mm(inch)
Front
Rear
Side
Bottom

19
English
USA
CANON PROFESSIONAL DISPLAY LIMITED WARRANTY FOR PRODUCTS PURCHASED
IN THE UNITED STATES
ThelimitedwarrantysetforthbelowisgivenbyCanonU.S.A.,Inc.('CanonUSA')withrespecttoCanonProfessional
DisplayEquipment(the'Equipment')accompanyingthislimitedwarrantyintheEquipment’soriginalcontainer,when
purchasedintheUnitedStates.ThislimitedwarrantyisonlyeffectiveuponpresentationofyourBillofSaleorother
proofofpurchase.
CanonUSAwarrantstotheoriginalend-userpurchaser,whendeliveredinnewconditioninitsoriginalcontainer,that
theEquipmentwillbefreefromdefectsinmaterialsandworkmanshipundernormaluseandserviceforaperiodof
ONE-YEARfromthedateoforiginalpurchase.WhenreturningEquipmentunderthiswarranty,youmustpre-pay
theshippingcharges,andyoumustencloseacopyoftheBillofSaleorotherproofofpurchasewithacomplete
explanationoftheproblem.EquipmentreturnedtoaCanonUSAfactoryservicefacility,andproventobedefective
uponinspection,willbe,withoutcharge,:
(a)repairedutilizingneworcomparablerefurbishedparts,or
(b)exchangedforrefurbishedornewEquipment
asdeterminedintheCanonUSA’srepairfacility’ssolediscretion.TherepairedorexchangedEquipmentwillbeshipped
backfreeofcharge.WarrantyexchangeorreplacementdoesnotextendtheoriginalwarrantyperiodoftheEquipment.
Forrepairsafterthewarrantyperiodhasexpired,anestimateofthecostofrepairandanopportunitytoapproveor
rejecttherepairexpensebeforeitisincurredwillbeprovided.Ifyouapprove,repairswillbemadeandtheEquipment
willbereturnedatyourriskandexpense.Ifyoureject,theEquipmentwillbereturnedtoyouatnochargetoyoutoan
addresswithintheUnitedStates.
This limited warranty only applies if the Equipment is used in conjunction with compatible computer
equipment, compatible peripheral equipment and compatible software, as to which items Canon USA will
have no responsibility. Canon USA shall have no responsibility under this limited warranty for use of the
Equipment in conjunction with incompatible peripheral equipment and/or incompatible software. Non-
Canon brand peripheral equipment and software which may be distributed with, or be factory loaded on,
the Equipment, are sold 'AS IS' without warranty of any kind by Canon USA, including any implied warranty
regarding merchantability or fitness for a particular purpose. The sole warranty with respect to such non-
Canon brand items is given by the manufacturer or producer thereof. If the Equipment contains a hard disk
drive, Canon USA recommends that data stored on that drive be duplicated or backed up to prevent its loss
in the event of failure or other malfunction of such drive.
Inordertoobtainwarrantyservice,pleasecontacttheauthorizedCanonretaildealerfromwhomyoupurchasedthe
EquipmentorcontacttheCANONINFORMATIONCENTERAT855-4K-CANON(855-452-2666)orontheinternetat
pro.usa.canon.com/support.YouwillbedirectedtothenearestservicefacilityforyourEquipment.
Technicalsupportprogramspecicssubjecttochangewithoutnotice.
ThisLimitedWarrantycoversalldefectsencounteredinnormaluseoftheEquipmentanddoesnotapplyinthe
followingcases:
A. LossordamagetotheEquipmentduetoabuse,neglect,mishandling,electriccurrentuctuation,accident,
impropermaintenance,useofnon-Canonaccessoriesorfailuretofollowoperating,maintenanceor
environmentalinstructionsprescribedinCanonUSA’suser’smanual;
B. IftheEquipmentisdefectiveasaresultofsand,dirtorwaterdamage;
C. Ifdefectsordamagesarecausedbytheuseofpartsorsupplies(otherthanthosesoldbyCanonUSA)that
causedamagetotheEquipmentorthatcauseabnormallyfrequentservicecallsorserviceproblems;
D. IfdefectsordamagesarecausedbyserviceotherthanCanonUSA'sfactoryservicecentersorauthorized
servicefacilities;
E. Anyinternalmodicationtoproducthardwareorrmware;
F. AnymaintenanceoftheEquipment,includinganyfeesforsuchMaintenance;
G.IftheEquipmenthashaditsserialnumberordatingalteredorremoved.

20
ThisLimitedWarrantydoesnotapplytoEquipmentpurchasedoutsidetheUnitedStates.ThisLimitedWarrantydoes
notapplytoaccessoriesorconsumablesfortheEquipment,whicharesold"ASIS",withoutwarrantyofanykindby
CanonUSA.PleaseretainthiswarrantycardandyourBillofSaleasapermanentrecordofyourpurchase.Thiscard
ensuresthatyouarecontactedpromptlyshouldtherebeasafetyinspection,modicationorproductrecallunder
applicablelawsorregulations.Thiscardensuresthatyouarecontactedpromptlyshouldtherebeasafetyinspection,
modicationorproductrecallunderapplicablelawsorregulations.
NO IMPLIED WARRANTY, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
APPLIES TO THIS EQUIPMENT AFTER THE APPLICABLE PERIOD OF EXPRESS WARRANTY OR
GUARANTY UNDER THIS WARRANTY (EXCEPT AS MENTIONED ABOVE). (SOME STATES DO NOT
ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU). CANON USA SHALL NOT BE LIABLE FOR LOSS OF REVENUES
OR PROFITS, EXPENSE FOR SUBSTITUTE EQUIPMENT OR SERVICE, STORAGE CHARGES, LOSS OR
CORRUPTION OF DATA, INCLUDING WITHOUT LIMITATION, LOSS OR CORRUPTION OF DATA STORED
ON THE EQUIPMENT’S HARD DRIVE, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE EQUIPMENT, REGARDLESS OF THE
LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF CANON USA HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CANON USA BE
GREATER THAN THE PURCHASE PRICE OF THE EQUIPMENT SOLD BY CANON USA AND CAUSING THE
ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, YOU ASSUME ALL RISK AND LIABILITY FOR
LOSS, DAMAGE OR INJURY TO YOU AND YOUR PROPERTY AND TO OTHERS AND THEIR PROPERTY
ARISING OUT OF USE, MISUSE OR INABILITY TO USE THE EQUIPMENT NOT CAUSED DIRECTLY BY
THE NEGLIGENCE OF CANON USA (SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU).
THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS
EQUIPMENT OR THE PERSON FOR WHOM IT WAS PURCHASED AS A GIFT.
Thiswarrantygivesyouspeciclegalrights,andyoumayalsohaveotherrightswhichvaryfromstatetostate.
CANON U.S.A., INC
Other manuals for DP-V3120
1
Table of contents
Other Canon Monitor manuals