Canon imagePRESS C6010 Technical manual

imagePRESS C6010
Customer Expectations Document
Version 2
Engineering Services and Solutions Division
Business Imaging Solutions Group, Canon U.S.A., Inc.

Version 2 imagePRESS C6010 Customer Expectations Document Page 2
Contents
1. Introduction.............................................................................................................6
2. Product Overview...................................................................................................6
2.1 Summary of Functions....................................................................................7
2.2 Offset Press vs. Digital imagePRESS.............................................................7
2.3 Image Stabilization Control .............................................................................8
2.4 Professional Input/Output Accessories ...........................................................9
3. Machine Dimensions and Space Requirements................................................10
3.1 Dimensions ...................................................................................................10
3.2 Weight...........................................................................................................11
3.3 Installation and Service Space......................................................................12
3.3.1 Minimum Space Requirements to Transport the Machine and Turn
Hallway Corners ..............................................................................13
3.3.2 Dimensions Diagrams......................................................................14
3.3.3 Installation Space Diagrams............................................................15
3.4 Recommended Floor Space Requirements..................................................17
3.5 Floor Structure Requirements.......................................................................17
3.6 Network Interface Connectivity......................................................................18
4. Power/Electrical Requirements...........................................................................18
4.1 Power Requirements for the Main Unit and Optional Accessories................19
5. Environmental Factors and Requirements.........................................................21
5.1 Temperature and Humidity Conditions..........................................................21
5.2 Temperature Gradient...................................................................................21
5.3 Ventilation .....................................................................................................22
5.4 Elevation Limitations.....................................................................................22
5.5 Lighting..........................................................................................................22
5.6 Sunlight.........................................................................................................22
5.7 Ammonia.......................................................................................................22

Version 2 imagePRESS C6010 Customer Expectations Document Page 3
6. Specifications.......................................................................................................23
6.1 Main Unit.......................................................................................................23
6.2 Color Image Reader-H1................................................................................26
6.3 Feeder (DADF-R1)........................................................................................27
6.4 POD Deck-A1/Secondary POD Deck-A1......................................................28
6.5 Paper Deck-AC1...........................................................................................28
6.6 Stack Bypass-A1...........................................................................................29
6.7 Tab Feeding Attachment-C1.........................................................................29
6.8 Professional Puncher-B1 and Professional Puncher Integration Unit-A1......29
6.9 Finisher-AJ1..................................................................................................30
6.10 Saddle Finisher-AJ2......................................................................................33
6.11 Puncher Unit-BB1 .........................................................................................36
6.12 Document Insertion Unit-C1..........................................................................36
6.13 Card Reader-C1............................................................................................37
6.14 High Capacity Stacker-C1.............................................................................37
6.15 High Capacity Stacker-F1 .............................................................................38
6.16 Perfect Binder-B1..........................................................................................39
6.17 Booklet Trimmer-D1......................................................................................40
6.18 Two-Knife Booklet Trimmer-A1.....................................................................41
6.19 SDD Square Fold Booklet-Maker with Two-Knife Trimmer ...........................42
7. System Options....................................................................................................43
7.1 Color UFR II/PCL/PS Printer Kit-T2 ..............................................................43
7.2 imagePRESS Server A1300 .........................................................................44
7.3 imagePRESS Server A2300 .........................................................................45
7.4 imagePRESS Server A3300 .........................................................................46
7.5 imagePRESS CR Server A7000 V2..............................................................47
7.6 imagePRESS CR Server A7500...................................................................48
7.7 Color Universal Send Kit-G1.........................................................................49
7.8 Universal Send PDF Security Feature Set-A1...............................................49
7.9 Universal Send PDF Advanced Feature Set-A1............................................49
7.10 Digital User Signature PDF Kit-A1 ................................................................49
7.11 Secure Watermark-A1...................................................................................49
7.12 HDD Data Encryption Kit-B9.........................................................................49
7.13 Data Erase Kit-C1.........................................................................................50
7.14Web Access Software-E1..............................................................................50
7.15 Encrypted Secure Print Software-C1 ............................................................50
7.16 Remote Operator's Software Kit-B1..............................................................50
7.17 Access Management System Kit-B1.............................................................50
7.18 Removable HDD Kit......................................................................................51
7.19 Other imagePRESS C6010 Main Unit Accessory Options............................51
7.20 Notes on the Hard Disk.................................................................................51
8. Installation Review ...............................................................................................52
8.1 Installation Time............................................................................................52
8.2 Customer Responsibilities.............................................................................53
9. Customer Productivity Program .........................................................................53
10. Consumables........................................................................................................53
10.1 Consumable Parts.........................................................................................54
10.1.1 Estimated Life of Consumables.......................................................54
11. Toner Container and Hopper Unit Yields ...........................................................55

Version 2 imagePRESS C6010 Customer Expectations Document Page 4
12. Waste Toner Yields ..............................................................................................55
13. Estimated Performance Standards.....................................................................55
13.1 Machine Reliability and Service Call Ratio....................................................56
14. Optimum Monthly Product Performance............................................................57
15. Machine Productivity ...........................................................................................58
15.1 Print Speed ...................................................................................................58
15.2 Mixed Media Productivity ..............................................................................60
15.3 Two Hour Unattended Operation ..................................................................60
15.4 Paper, Toner, and Waste Toner Replacement..............................................61
16. Media Usage/Compatibility..................................................................................61
16.1 Media Characteristics by Media Library Parameters.....................................62
16.2 Paper Handling and Storage.........................................................................63
16.3 Selecting the Correct Media..........................................................................64
16.4 Paper Grain and Curl....................................................................................65
16.5 Note for Customers Who Cut Their Own Paper............................................66
16.6 Media Feed Locations...................................................................................66
16.7 Paper Sizes and Feed Location Chart ..........................................................70
17. Customer-Defined Image Quality Adjustments and Recommendations.........71
17.1 Device Management Settings .......................................................................72
17.2 Paper Type Management Settings................................................................73
18. Responsibility Matrix ...........................................................................................74

Version 2 imagePRESS C6010 Customer Expectations Document Page 5
IMPORTANT
The purpose of this Customer Expectations Document is to explain the current
features and capabilities of the imagePRESS C6010, and provide customers
information about what to expect before purchasing the machine.
The information included in this document has been pulled from various sources,
including product reference guides, service guides, and user manuals, as well as
from the results from internal Canon testing. Specifications and other information
contained herein may vary slightly, and in a non-material way, from actual device
values, including those found in advertising and other printed matter. Part
numbers, yield information, and specifications are subject to change without
notice. Accordingly, the latest specifications for the machine may not be found in
this document. As new information becomes available, this document will be
revised. Canon authorized dealers can access the latest revision of this
document from the Download Center page in the e-Support Web site
(support.cusa.canon.com).
DISCLAIMER
NEITHER CANON NOR ITS SUPPLIERS NOR ANY AUTHORIZED SERVICE
PROVIDER SHALL BE LIABLE FOR PERSONAL INJURY OR PROPERTY DAMAGE
(UNLESS CAUSED SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON
OR ANY AUTHORIZED SERVICE PROVIDER), LOSS OF REVENUE OR PROFIT,
FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, EXPENDITURES FOR
SUBSTITUTE EQUIPMENT OR SERVICES, LOSS OR CORRUPTION OF DATA,
INCLUDING, WITHOUT LIMITATION, DATA STORED ON THE PRODUCT’S HARD
DISK DRIVE, STORAGE CHARGES OR OTHER SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO
USE THE PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE
CLAIM IS BASED AND EVEN IF CANON OR ITS SUPPLIERS OR ANY
AUTHORIZED SERVICE PROVIDER HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CANON
OR ITS SUPPLIERS OR ANY AUTHORIZED SERVICE PROVIDER BE GREATER IN
AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT CAUSING THE
ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, THE PURCHASER
ASSUMES ALL RISKS AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO
PERSONS AND THE PROPERTY OF THE PURCHASER OR OTHERS ARISING
OUT OF THE POSSESSION, USE, MISUSE, OR INABILITY TO USE THE PRODUCT
NOT CAUSED SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON OR
ANY AUTHORIZED SERVICE PROVIDER.
Copyright 2013 by Canon U.S.A., Inc. All rights reserved.
Product and company names used herein are, or may be, the registered trademarks or
trademarks of their respective owners.

Version 2 imagePRESS C6010 Customer Expectations Document Page 6
1. Introduction
The Canon imagePRESS C6010 Customer Expectations Document contains
information about the features and capabilities of the Canon imagePRESS C6010.
This document should be used as part of the presale and preinstallation planning
process to help clarify the requirements and responsibilities associated with
supporting, owning, and operating the imagePRESS C6010. It is also
recommended that those interested in purchasing the imagePRESS C6010 have,
and familiarize themselves with, the information in this document prior to making
their purchase.
2. Product Overview
The Canon imagePRESS C6010 brings the following capabilities to users in a
high-volume, mid-production office environment, including commercial printers,
Print-for-Pay, and CRD customers:
•Printing and copying speeds of up to 60 ppm (LTR, Color and Black-and-White)
•High image quality on various media with a large image area, keeps the color
consistent and durable.
•Prints up to 1,200 x 1,200 dpi.
•Scans in up to 600 x 600 dpi, and then outputs the image in up to 1,200 x 1,200
dpi interpolated resolution. This results in higher quality characters, smoother
corners, and cleaner gradient transitions. Text appears sharper, and graphics
appear clear and detailed.
•Designed with new technologies, such as the oil-less V toner, E drum, Twin Red
Imaging Laser Beam scanner, Twin Sleeve Developer Unit with a hygro-thermal
sensor, and Real Time and Post Fusing calibration to achieve high-image quality,
color consistency, and media versatility.

Version 2 imagePRESS C6010 Customer Expectations Document Page 7
2.1 Summary of Functions
Function
imagePRESS C6010
Output Speed (Color)
60 ppm (LTR)
Output Speed (B&W)
60 ppm (LTR)
Engine Resolution
1,200 x 1,200 dpi
Gradations
256 levels
Max. Paper Size
13” x 19.2”
Max. Paper Weight
120 lb cover (325 g/m2)
Max. Printable Area
12.7” x 19” (323 mm x 482.7 mm)*1
Printer Memory
1.5 GB
Copy
Yes (w/optional Reader)
Mail Box
Yes
Network
Yes
Remote UI
Yes
MEAP Capability
Yes
Controllers
imagePRESS Server A3300
imagePRESS Server A2300
imagePRESS Server A1300
imagePRESS CR Server A7500
imagePRESS CR Server A7000 V2
Color UFR II/PCL/PS Printer Kit-T2
Network Scanning
Yes (w/optional Reader)
Send
Optional (Universal Send)
*1 The maximum guaranteed print size is 12.6” x 19” (320.6 mm x 482.7 mm).
2.2 Offset Press vs. Digital imagePRESS
Offset printing is a technique that transfers (or “offsets”) an inked image from a
plate to a rubber blanket, and then to the printing surface. This enables the offset
press to maintain a consistent and high image quality over long print runs because
the plate never touches the paper. The process requires a substantial investment
in equipment and setup time to achieve these results.
Adigital press uses an electrostatic process to produce “offset-like” image quality
at a fraction of the cost of an offset press. In the imagePRESS C6010 digital press,
the drum is imaged; the toner is applied, and then transferred to the ITB
(Intermediate Transfer Belt). The ITB then transfers all four toner colors to the
paper in one single pass. The small toner particle size captures a greater color
gamut space, closer to that of an offset press.

Version 2 imagePRESS C6010 Customer Expectations Document Page 8
2.3 Image Stabilization Control
The quality of printed images is affected by changes in the environment, such as
temperature and humidity in which the machine is installed. It is also affected by
the deterioration of image formation parts through extended usage. The
imagePRESS C6010 performs image stabilization by controlling the LUT (Lookup
Table) and laser power based on the toner charge amount that is assumed by
temperature, humidity, and consumption readings sensed in the developing unit by
the hygro-thermal sensor. This technology moderates toner density fluctuations
when the machine starts up and at sudden changes in the environment when the
marking engine is not operated for some time.

Version 2 imagePRESS C6010 Customer Expectations Document Page 9
2.4 Professional Input/Output Accessories
The imagePRESS C6010 features many input and output accessories that allow
customers working in office environments to complete large jobs directly from the
machine. For more information on the input and output accessories that can be
attached to the machine, see “Specifications,” on p. 23.
Input Accessories
•POD Deck-A1/Secondary POD Deck-A1
•Paper Deck-AC1
•Color Image Reader-H1
•DADF-R1
•Stack Bypass-A1
Finishing (Output) Accessories
•Professional Puncher-B1 & Professional Puncher Integration Unit-A1
•High Capacity Stacker-C1 (x 2)
•High Capacity Stacker-F1 (Requires the imagePRESS Server
A3300/A2300/A1300)
•Perfect Binder-B1
•Saddle Finisher-AJ2
•Finisher-AJ1
•Puncher Unit-BB1
•Booklet Trimmer-D1
•Two-Knife Booklet Trimmer-A1
•Document Insertion Unit-C1
•SDD (Smart Dedicated Design) Square Fold Booklet-Maker with Two-Knife
Trimmer
IMPORTANT
•Only the Saddle Finisher-AJ2 or Finisher-AJ1 can be installed. They cannot be
installed together.
•Only the Two-Knife Booklet Trimmer-A1 or SDD Square Fold Booklet-Maker with
Two-Knife Trimmer can be installed.
•The Booklet Trimmer-D1 requires the Saddle Finisher-AJ2. The Two-Knife
Booklet Trimmer-A1 requires the Booklet Trimmer-D1, and the SDD Square Fold
Booklet-Maker with Two-Knife Trimmer requires the Booklet Trimmer-D1.
•Only one High Capacity Stacker-F1 can be attached to the machine.
•The High Capacity Stacker-C1 and High Capacity Stacker-F1 cannot be installed
together.
•The Feeder DADF-R1 requires the Color Image Reader-H1.

Version 2 imagePRESS C6010 Customer Expectations Document Page 10
3. Machine Dimensions and Space Requirements
3.1 Dimensions
The following table includes the width, height, and depth dimensions (in inches and
millimeters) of the main unit and optional accessories.
Unit
Width
Depth
Height
Main Unit*1
101.8”
2,586 mm
45.4”
1,152 mm
52.4”
1,330 mm
POD Deck-A1
38.7”
982 mm
31.2”
792 mm
43.1”
1,095 mm
POD Deck-A1 &
Secondary PODDeck-A1
70.6” 1,793 mm 31.2" 792 mm 43.1” 1,095 mm
Paper Deck-AC1
23.7”
601 mm
24.4”
621 mm
22.4”
570 mm
Stack Bypass-A1*5
15.7”
398 mm
21.4”
544 mm
13.4”
339 mm
Color Image Reader-H1
28.8”
732 mm
23.4”
595 mm
4.1”
105 mm
DADF-R1
25.4”
646 mm
22.4”
570 mm
5.6”
143 mm
Professional Puncher-B1
& Professional Puncher
Integration Unit-A1
22.0” 560 mm 31.2” 792 mm 40.9” 1,040 mm
High Capacity
Stacker-C1
33.9” 860 mm 30.1” 765 mm 48.8” 1,240 mm
High Capacity
Stacker-F1
35.4” 899 mm 29.3” 745 mm 40.9”*7 1,040 mm*7
Saddle Finisher-AJ2*3
41.7”
1,060 mm
31.2”
792 mm
46.5”
1,180 mm
Finisher-AJ1*2
35.0”
890 mm
31.2”
792 mm
46.5”
1,180 mm
Puncher Unit-BB1
Part of the Finisher-AJ1 or Saddle Finisher-AJ2
Booklet Trimmer-D1*2 &
Saddle Finisher-AJ2
*3
74.4” 1,890 mm 31.2” 792 mm 46.5” 1,180 mm
Booklet Trimmer-D1,
Two-Knife Booklet
Trimmer-A1, & Saddle
Finisher-AJ2
95.7” 2,431 mm 31.2” 792 mm 46.5” 1,180 mm
Document Insertion
Unit-C1
24.6” 625 mm 26.3” 667 mm 8.4” 213 mm
Perfect Binder-B1*4
36.3”
922 mm
31.1”
791 mm
53.5”
1,360 mm
Square Fold
Booklet-Maker &
Two-Knife Trimmer
*6
62.3” 1,582 mm 51.1” 1,298 mm 51.0” 1,295 mm
*1 The Marking Engine, Sub Station, and Power Station Unit all make up what is hereinafter
referred to as the “Main Unit.”
*2 The expansion tray is attached.
*3 The auxiliary booklet tray is attached.
*4 The Insertion Unit is included.
*5 The auxiliary tray is extended.
*6 The Square Fold Booklet-Maker Conveyor Tray is fully extended.
*7 When the eject tray is extended the depth is 49.2” (1,250 mm).

Version 2 imagePRESS C6010 Customer Expectations Document Page 11
3.2 Weight
The weights of the main unit, feeding and finishing options (in pounds and
kilograms) are listed in the table below.
Unit
Weight
Main Unit
2,645 lb
1,200 kg
POD Deck-A1
551 lb
250 kg
Secondary POD Deck-A1
507 lb
230 kg
Paper Deck-AC1
112 lb
51 kg
Stack Bypass-A1
11.9 lb
5.4 kg
Color Image Reader-H1
38.5 lb
17.5 kg
DADF-R1
48.5 lb
22 kg
Professional Puncher-B1
176 lb
80 kg
Professional Puncher Integration Unit-A1
88 lb
40 kg
High Capacity Stacker-C1
478 lb
217 kg
High Capacity Stacker-F1
264.6 lb
120 kg
Saddle Finisher-AJ2
397 lb
180 kg
Finisher-AJ1
287 lb
130 kg
Puncher Unit-BB1*1
7 lb
3 kg
Booklet Trimmer-D1
335 lb
152 kg
Two-Knife Booklet Trimmer-A1
320 lb
145 kg
Document Insertion Unit-C1
37.5 lb
17 kg
Perfect Binder-B1*2
697 lb
316 kg
Square Fold Booklet-Maker & Two-Knife
Trimmer
573 lb 260 kg
*1 Installed inside the optional Finisher-AJ1 or Saddle Finisher-AJ2.
*2 Includes the document insertion unit.

Version 2 imagePRESS C6010 Customer Expectations Document Page 12
3.3 Installation and Service Space
The installation site must provide enough space for unrestricted operation,
maintenance work, and proper ventilation. The machine dimensions are in
diagrams on the following pages. Every attempt should be made to install the
equipment in a room that is large enough for proper servicing and maintenance of
the equipment, and ensure that issues, such as ventilation, odors, and dust
accumulation are not a concern.
IMPORTANT
•Keep the back of the machine, with all of its doors and access panels open, at
least 31.5” (800 mm) away from a wall.
•Keep the front and sides of the machine, with all of its doors and access panels
open, at least 19.7” (500 mm) away from a wall.
•The floor must be level (with no bows) for the stabilization and support of the
machine.
•The minimum doorway opening that the machine passes through prior to
installation must be at least 36” wide.
•The minimum elevator depth used to transport the machine prior to installation
must be at least 56”.
•At least 44 3/4” (1,135 mm) in width is necessary to negotiate turns prior to
installation.
•The machine cannot be moved once it is in place.

Version 2 imagePRESS C6010 Customer Expectations Document Page 13
3.3.1 Minimum Space Requirements to Transport the Machine and Turn Hallway
Corners
The following table represents the minimum width that is necessary to turn
hallway corners and transport the machine to its final installation site.
Equipment
Dimensions When Transporting
(Depth x Width)
Minimum Corridor Width
Required
Marking Engine 54 3/4” x 43 1/2”
(1,390 mm x 1,105 mm)
89 5/8”
(2,276 mm)
Sub Station 47 1/4” x 31 1/8”
(1,200 mm x 792 mm)
76 1/4”
(1,938 mm)
Power Station Unit 54 1/2” x 8 1/8”
(1,383 mm x 227 mm)
74 7/8”
(1,902 mm)
POD Deck-A1 38 5/8” x 31 1/4”
(982 mm x 792 mm)
69 3/8”
(1,762 mm)
Secondary POD Deck-A1 31 1/4” x 29 3/8”
(792 mm x 745 mm)
62 1/2”
(1,587 mm)
Professional Puncher-B1 31 1/4” x 12”
(792 mm x 305 mm)
53 1/8”
(1,349 mm)
Professional Puncher
Integration Unit-A1 31 1/4” x 9 7/8”
(792 mm x 250 mm)
52 3/8”
(1,331 mm)
High Capacity Stacker-C1 33 7/8” x 30 1/8”
(860 mm x 765 mm)
65”
(1,651 mm)
Perfect Binder-B1 36 5/16” x 31 1/8”
(922 mm x 791 mm)
67 1/2”
(1,715 mm)
Saddle Finisher-AJ2 31 1/2” x 31 1/4”
(800 mm x 792 mm)
64”
(1,626 mm)
Finisher-AJ1 31 1/2” x 31 1/4”
(800 mm x 792 mm)
64”
(1,626 mm)
Booklet Trimmer-D1 62” x 30 3/8”
(1,575 mm x 770 mm)
88 3/4”
(2,254 mm)
Two-Knife Booklet
Trimmer-A1 30 3/8” x 21 1/8”
(770 mm x 536 mm)
56 5/8”
(1,439 mm)
Document Insertion
Unit-C1 26 1/4” x 24 5/8”
(667 mm x 625 mm)
55 5/8”
(1,414 mm)
NOTE
The Marking Engine, Sub Station, and Power Station Unit are transported
separately.

Version 2 imagePRESS C6010 Customer Expectations Document Page 14
3.3.2 Dimensions Diagrams
Approx.
95.7”
Approx.
33.9”
Approx.
33.9”
Approx.
101.8”
Approx.
70.6”
Approximately 394”
Approx.
45.4”
Provide at least 31.5” behind the machine, and
19.7” in front and on the sides of the machine
(with all doors and access panels open).
Approx.
52.4”
Approx.
40.9”
Approx.
58.1”
Approx.
36.3”
Approx.
22.0”

Version 2 imagePRESS C6010 Customer Expectations Document Page 15
3.3.3 Installation Space Diagrams
The approximate installation space requirements may differ, depending on how
the machine is configured and the optional accessories attached.
There must be enough space around the machine. The following diagrams show the
minimum dimensions; whenever possible, make sure there will be more space than indicated.
The optional Finisher-AJ1 is attached.
[1] Marking Engine
[3] Power Station Unit
[2] Sub Station
[4] Finisher-AJ1
The optional High Capacity Stacker-C1 and Paper Deck-AC1 are attached.
[1] Marking Engine
[4] Paper Deck-AC1
[2] Sub Station
[5] High Capacity Stacker-C1
[3] Power Station Unit

Version 2 imagePRESS C6010 Customer Expectations Document Page 16
Maximum Configuration
[1] Marking Engine
[8] High Capacity Stacker-C1
[2] Sub Station
[9] High Capacity Stacker-C1 (Secondary)
[3] Power Station Unit
[10] Perfect Binder-B1
[4] POD Deck-A1
[11] Finisher-AJ1/Saddle Finisher-AJ2
[5] Secondary POD Deck-A1
[12] Booklet Trimmer-D1
[6] Professional Puncher-B1
[13] Two-Knife Booklet Trimmer-A1
[7] Professional Puncher Integration Unit-A1
IMPORTANT
•The maximum configuration (fully configured machine) includes 1-POD
Deck-A1, 1-Secondary POD Deck-A1, the Main Unit (Marking Engine, Sub
Station, and Power Station Unit), Professional Puncher-B1 and Professional
Puncher Integration Unit-A1, 2-High Capacity Stackers-C1, Perfect Binder-B1,
Saddle Finisher-AJ2, Booklet Trimmer-D1, and Two-Knife Booklet Trimmer-A1.
•The fully configured width of the machine includes opening space for the POD
Deck door and the extended tray of the Two-Knife Booklet Trimmer.
•The optional SDD Square Fold Booklet-Maker with Two-Knife Trimmer is not
shown in the configuration diagrams above. If the SDD Square Fold
Booklet-Maker with Two-Knife Trimmer is attached to the machine, make sure
that there is approximately 41.2” (1,046 mm) of space added to the installation
space and floor design.
•The optional High Capacity Stacker-F1 is not shown in the configuration
diagrams above. If the High Capacity Stacker-F1 is attached to the machine,
make sure that there is approximately 35.4” (899 mm) of space added to the
installation space and floor design.
•There is approximately 1/5” (5 mm) of space between each of the following
attached accessories: the High Capacity Stacker-C1 or High Capacity
Stacker-F1, Perfect Binder-B1, Finisher-AJ1 or Saddle Finisher-AJ2, Booklet
Trimmer-D1, and SDD Square Fold Booklet-Maker with Two-Knife Trimmer.

Version 2 imagePRESS C6010 Customer Expectations Document Page 17
3.4 Recommended Floor Space Requirements
For a fully configured imagePRESS C6010, it is recommended that there be at
least 37.8’ (W) x 10.7’ (D) of level floor space.
IMPORTANT
•The imagePRESS C6010 was created to be modular in design. Floor space,
budget, monthly copy/print volume, and applications will determine which
configuration works best.
•If the SDD Square Fold Booklet-Maker with Two-Knife Trimmer is attached to the
machine, make sure that there is approximately 41.2” (1,046 mm) of space
added to the installation space and floor design.
•If the High Capacity Stacker-F1 is attached to the machine, make sure that there
is approximately 35.4” (899 mm) of space added to the installation space and
floor design.
•Some type of finishing option (Saddle Finisher-AJ2, Finisher-AJ1, High Capacity
Stacker-C1, or High Capacity Stacker-F1) is required.
•Any configuration of up to 1-POD Deck-A1, 1-Secondary POD Deck-A1, and
2-High Capacity Stackers-C1 may be attached to the machine at once.
•Only one High Capacity Stacker-F1 can be attached to the machine.
3.5 Floor Structure Requirements
The floor on which this machine is installed must have strength of at least
92.2 lb/ft2(450 kg/m2). If the floor does not have this level of strength, consult a
building contractor before installing the machine.
The weight of the machine is distributed on the floor through the adjusters and
wheels. Do not install the machine on an unstable floor or platform.
37.8’ (11.5 m)
10.7’ (3.3 m)

Version 2 imagePRESS C6010 Customer Expectations Document Page 18
3.6 Network Interface Connectivity
A standard Ethernet 10/100Base-T interface jack (RJ-45) for device installation,
monitoring, and Mail Box access via the Remote UI, ships standard with all
configurations.
A USB 2.0 High-Speed interface port ships standard with all configurations for
direct connection to centralized environments that want to drive all jobs through a
single host PC.
4. Power/Electrical Requirements
The imagePRESS C6010 requires a NEMA L14-30 receptacle for the main unit
and proper operation.
NEMA L14-30 Receptacle

Version 2 imagePRESS C6010 Customer Expectations Document Page 19
4.1 Power Requirements for the Main Unit and Optional Accessories
Part or Accessory Power Supply
Power Supply Cord/Plug
Specifications
Length of Power
Cord
Main Unit
Single Phase 208 V/30 A
outlet Y Configuration NEMA L14-30 9’ 8” (3 m)
POD Deck-A1*1 1-208 V/15 A outlet
(regardless of the number of
POD Decks connected)
NEMA 6-15
UL498, 2-pole, 3-wire, grounding
devices rated
250 V/15 A
6’ (1.8 m)
Paper Deck-AC1*2 From the main unit — —
Color Image
Reader-H1
*2
From the main unit — —
DADF-R1*2 From the main unit — —
High Capacity
Stacker-C1*3
1-120 V/15 A outlet
(regardless of the number of
stackers connected) NEMA 5-15 6’ (1.8 m)
High Capacity
Stacker-F1
1-120 V/15 A outlet NEMA 5-15 6’ (1.8 m)
Professional Puncher-B1
& Professional Puncher
Integration Unit-A1
*4 1-120 V/15 A outlet NEMA 5-15 6’ (1.8 m)
Saddle Finisher-AJ2 1-120 V/15 A outlet
NEMA 5-15
UL498, 2-pole, 3-wire, grounding
devices rated
250 V/15 A
6’ (1.8 m)
Finisher-AJ1 1-120 V/15 A outlet
NEMA 5-15
UL498, 2-pole, 3-wire, grounding
devices rated
250 V/15 A
6’ (1.8 m)
Perfect Binder-B1 1-208 V/15 A outlet
NEMA 6-15
UL498, 2-pole, 3-wire, grounding
devices rated
250 V/15 A
9’ (3 m)
Documentation Insertion
Unit-C1
*2
From the finisher — —
Puncher Unit-BB1*2 From the finisher — —
Booklet Trimmer-D1 From the finisher — —
Stack Bypass-A1*2 From the main unit — —
Two-Knife Booklet
Trimmer-A1
1-120 V/15 A outlet NEMA 5-15 6’ (1.8 m)
Square Fold Booklet-
Maker & Two-Knife
Trimmer
*6
1-120 V/15 A outlet NEMA 5-15 6’ (1.8 m)
External Start Interface Kit
for the SDD Two-Knife
Trimmer
1-120 V/15 A outlet NEMA 5-15 6’ (1.8 m)
imagePRESS Server
A1300
*5
1-115 V/6 A outlet NEMA 5-15 6’ (1.8 m)
imagePRESS Server
A2300
*5
1-115 V/6 A outlet NEMA 5-15 6’ (1.8 m)
imagePRESS Server
A3300
2-115 V/6 A outlets NEMA 5-15 6’ (1.8 m)
imagePRESS CR Server
A7000 V2
2-115 V/6 A outlets NEMA 5-15 6’ (1.8 m)
imagePRESS CR Server
A7500
2-115 V/6 A outlets NEMA 5-15 6’ (1.8 m)
*1 The Secondary POD Deck-A1 draws power from the POD Deck-A1.
*2 Does not require any additional outlets.
*3 If a second High Capacity Stacker-C1 is connected, the second stacker draws power from the first stacker.
*4 The Professional Puncher Integration Unit-A1 provides the Professional Puncher-B1 with power.
*5 If the optional Integrated Interface & Stand-A1, which includes a furniture stand, monitor, keyboard, and mouse, is
installed, an additional 115 V/6 A (NEMA 5-15) receptacle is required for the monitor.
*6 The SDD Two-Knife Trimmer provides the SDD Square Fold Booklet-Maker with power.

Version 2 imagePRESS C6010 Customer Expectations Document Page 20
The following illustration shows the relative position of the power outlets and
voltage requirements of each optional accessory item.
IMPORTANT
•Phase converters and step down transformers are not supported.
•We recommend an additional standard 115 V/15 A outlet for service tools, such
as a laptop computer or vacuum that may be used when servicing or configuring
the machine.
•Use only dedicated and properly grounded outlets for the main unit and
imagePRESS Server. It is also strongly suggested to use dedicated and properly
grounded outlets for each optional accessory. Do not use extension cords. The
ground connection serves to provide the internal electronics with a reference
voltage. Faulty or poor ground sources will cause this reference voltage to fall
into a range that no longer serves as a reliable reference voltage. The internal
logic and programming of the imagePRESS C6010 will not perform reliably
because there is an insufficient difference between the internal operating signal
voltages and the poor ground reference signal. A qualified electrician can
measure and provide the ground source that the imagePRESS C6010 or any
computer controlled office equipment requires.
•Before installation, confirm that all necessary receptacles are available.
•If the optional Integrated Interface & Stand-A1, which includes a furniture stand,
monitor, keyboard, and mouse, is installed on the imagePRESS Server A1300 or
A2300, an additional 115 V/6 A (NEMA 5-15) receptacle is required for the
monitor.