Canon BJC-3000 Series User manual

QY8-1365-000
REVISION 0
COPYRIGHT  1999 CANON INC. CANON BJC 3000 0899 SC 0.30-0 PRINTED IN JAPAN (IMPRIME AU JAPON)
AUG. 1999

0899 SC 0.30-0

Application
This manual has been issued by Canon Inc. for qualified persons to learn technical theory, installation,
maintenance, and repair of products. This manual covers all localities where the products are sold. For
this reason, there may be information in this manual that does not apply to your locality.
Corrections
This manual could include technical inaccuracies or typographical errors due to improvements or
changes in the products. When changes occur in applicable products or in the content of this manual,
Canon will release technical information as the need arises. In the event of major changes in the
contents of this manual over a long or short period, Canon will issue a new editions of this manual.
The following paragraph does not apply to any countries where such provisions are
inconsistent with local law.
Trademarks
The product names and company names described in this manual are the registered trademarks of the
individual companies.
Copyright
This manual is copyrighted with all rights reserved. Under the copyright laws, this manual may not be
copied, reproduced or translated into another language, in whole or in part, without the written consent
of Canon Inc., except in the case of internal business use.
Copyright 1999 by Canon Inc.
CANON INC.
BJ Products Quality Support Dept.
16-1, Shimonoge 3-chome, Takatsu-ku, Kawasaki-shi, Kanagawa 213, Japan
This manual has been produced on an Apple Power Macintosh G3 personal computer and Apple
LaserWriter 600/16 laser beam printer; artworks of printing films were printed on Valityper® 4300J. All
page layouts, logos, and parts-list data were saved with Canon Optical Disc Subsystem mo-5001S™ and
Optical Disc Cartridge mo-502M™, and Interface Kit mo-IF2™ for Macintosh. All graphics were produced
with MACROMEDIA FREEHAND™ 7.0J. All documents and all page layouts were created with
QuarkXpress™ 3.3 Japanese version.

I
Product
Specificatons Maintenance Operation Troubleshhotin
gAppendix
I. ABOUT THIS MANUAL
This manual is divided into five sections, and contains information required for serving the
unit.
Part 1: Product Specifications
This section contains outlines and product specifications of the unit.
Part 2: Maintenance
This section explains how to maintain the unit. Descriptions and adjustment of
assembly/disassembly and verification methods after assembly/disassembly are
included.
Part 3: Operation
This section explains how to operate the unit properly. Operation procedures for service
modes are explained.
Part 4: Troubleshooting
This section explains how to find out possible causes of troubles and units/parts to be
replaced. It is divided into two parts: troubleshooting by error indications and by
symptoms.
Part 5: Appendix
This section includes block diagrams of the unit and information to technically
understand the hardware (applied for new techniques only). This section also includes
pin arrangements.
Sufficient information regarding assembly/disassembly is not given in this
manual. Refer to the illustrations in the separate Parts Catalog .
REF.