Canvas BRETON ARM CHAIR 088-2184-2 User manual

BRETON ARM CHAIR
PRODUCT NO. 088-2184-2
ASSEMBLY INSTRUCTIONS
Toll free: 1-888-670-6684
IMPORTANT: Please read and understand this manual before any assembly.
Before beginning assembly of product, make sure all parts are present. Compare
parts with packaging contents list. If any part is missing, or if you have any questions,
contact the customer service department at 1-888-670-6684.

Made in China
IMPORTED BY TRILEAF DISTRIBUTION TRIFEUIL TORONTO, CANADA M4S 2B8

3
TABLE OF CONTENTSIMPORTANT SAFETY INSTRUCTIONS
Important Safety Instructions 3
Parts List 4
Assembly 5
Cleaning and Maintenance 8
Technical Data 8
Warranty 9
IMPORTANT: Retain for future reference, and read carefully.
Warning! To reduce the risk of serious injury, read the following safety
instructions before assembling and using the armchair.
•
This product is intended for domestic outdoor use only.
•
The product should be placed on flat, horizontal ground.
•
Any assembly or maintenance of the product must be carried out by adults only.
•
Arrange necessary manpower when assembling or moving the product.
•
Some parts may contain sharp edges. Wear protective gloves if necessary.
•
Keep children and pets away while setting up the armchair.
•
Check all nuts and bolts periodically for tightness. When required, tighten them again.
•
Repairing and replacing parts should be done by a qualified technician.
•
If the product will not be used for a long period (e.g., winter time), it should be stored in a clean,
dry environment.
•
Do not light any fires below or near the product!
•
Retain the original packaging to store the armchair.
Caution! Always keep children under close supervision while they are using or around
this product.
Never leave children unattended.

Right arm - 1
Left arm - 1
Seat panel - 1
1
2
3
Back panel - 1
4
Seat cushion - 1
5
Back cushion - 1
6
4PRODUCT NO. 088-2184-2
PARTS LIST
Plastic foot - 4
7
Screw with washer M6X35 - 8
Screw with washer M6X30 - 2
Nut with washer - 4
C
A
B
Hex key - 1
D
Wrench - 1
E

Hex key Wrench
5
ASSEMBLY PREPARATION
Let us help you!
DO NOT RETURN YOUR PRODUCT TO THE STORE. CALL US FIRST!
1-888-670-6684
If you have questions regarding your product, require warranty
assistance, or have damaged or missing parts, please call our customer
service toll-free helpline. Contact us for assistance; we’re here to help.
Place all parts from the box in a cleared area and position the m on the floor in front of you.
Remove all packing materials and place them back into the box. Do not dispose of the packing
materials until assembly is complete. Read each step carefully before beginning any assembly
and make sure you understand each step. If you are missing a part, please call our toll-free
number for assistance 1-888-670-6684.
CAUTION!
•
The maximum weight capaicty of the armchair is 225 lb (102 kg).
Do not stand on the product.
•
Keep children away during assembly.
This product contains small parts which can be swallowed by children.
•
Keep fingers away from the places where they can be pinched or trapped.
•
Do not attempt to assemble the armchair if any parts are missing.
Needed for assembly:
Two people

Step 1
Attach the seat panel 3to the back panel 4 using the screws B with washers,
aligning the holes. When assembled, tighten the screws with the hex key D.
Requires parts 1, 3, 4, A, D
Step 2
Connect the back panel 4to the right arm 1using the screws Awith
washers; and then use the screws Awith washers to connect the seat panel 3,
aligning the holes. When assembled, tighten the screws with the hex key D.
4
6PRODUCT NO. 088-2184-2
ASSEMBLY
Note: Do not tighten screws all the way until you have assembled the armchair.
Once assembly is complete, tighten each screw.
3
4
3
1
4
B
A
Requires part 3, 4, B, D

Requires parts 2, 3, 4, A, D
Connect the left arm 2to the back panel 4using the screws Awith washers;
and then use the screws Awith washers to connect the seat panel 3, aligning
the holes. When assembled, tighten the screws with the hex key D.
Step 4
Connect the plastic feet 7to the right arm 1and the left arm 2using the nuts C
with washers. When assembled, tighten the nuts with the wrench E.
Step 5
Put seat cushion 5and back cushion 6on the seat.
Requires parts 5, 6
5
6
7
7
2
3
7
7
7
ASSEMBLY
4
A
C
Step 3
Requires parts 1, 2, 7, C, E

8PRODUCT NO. 088-2184-2
CLEANING AND MAINTENANCETECHNICAL DATA
•
Clean the product with a slightly damp cloth and a little detergent. Let it dry thoroughly.
•
Do not use bleach, acid, or other abrasive cleaners on the arm chair or frame parts.
CAUTION!
•
Check all screws and nuts periodically for tightness, tightening them
again as required.
Dimensions (L x W x H)
Product weight
12 PRODUCT NO. 046-3456-8 | MODEL NO. 088-163
31 1/2 x 30 5/16 x 32 1/16"
80 x 77 x 81.5 cm
31 lb 14 oz (14.5 kg）

13
9
WARRANTY
This CANVAS product carries a one (1) year warranty against defects in workmanship and
materials. Trileaf Distribution agrees to replace a defective product free of charge within
the stated warranty period, when returned by the original purchaser with proof of purchase.
This product is not guaranteed against wear or breakage due to misuse and/or abuse.