Canvas HAMPTON 088-1934-4 User manual

ASSEMBLY INSTRUCTIONS
Toll-free: 1-888-670-6684
IMPORTANT: Please read this manual carefully before beginning assembly of this product.
Keep this manual for future reference.
Day Bed and Swing
MODEL NO. 088-1934-4
HAMPTON COLLECTION
Attention：
Canopy is for temporary use as sunshade only.
Please remove when not in use.

TABLE OF CONTENTSIMPORTANT SAFETY INSTRUCTIONS
Important Safety Instructions
2
TABLE OF CONTENTS
2
Parts List 3
Assembly 5
Cleaning and Maintenance 12
12
Warranty
IMPORTANT: Retain for future reference, and read carefully.
• SET UP YOUR FURNITURE PROPERLY
Ensure that all parts are assembled properly and fully tightened as per the instructions.
When placing in the desired location, ensure that all legs are resting on the same surface.
You may adjust the legs levellers as required to ensure that the item stands in a rigid position.
• EXAMINE YOUR FURNITURE
Examine occasionally to ensure that there are no loose parts. If loose parts are found,
they must be retightened fully before additional use.
• Do not completely tighten bolts and nuts until indicated in assembly step.
2MODEL NO. 088-1934-4

3
PARTS LIST
Leg post - 4
Side panel - 2
1
2
Top crossbar - 2
3
Top crossbar - 2
4
Top crossbar - 2
5
Canopy crossbar - 3
6
7
8
9
10
11
Rear crossbar - 1
Left arm - 1
Right arm- 1
Front support bar - 1
Rear support bar - 1
12
Seat and back - 1
13
Hanging bar - 4
14
Canopy - 1
16
17
18
A
B
C
D
E
F
G
H
M8 metal washer- 30
M8 nut - 2
I
Plastic washer - 2
J
“S” hook - 2
K
Open hex wrench - 1
Cushion - 1
Post base - 4
Base plate - 4
M6 metal washer - 4
15
Canopy side bar - 2
L
Allen wrench - 1
M
M8 Hex wrench - 1
N
Lawn stake - 16
M6*12 bolt - 8 + 1 spare
M6*15 bolt - 4
M8*20 bolt - 20 + 2 spares
M8*75 bolt - 8 + 1 spare
M8*80 bolt - 2

Needed for assembly:
3 people
ASSEMBLY PREPARATION
Let us help you!
DO NOT RETURN YOUR PRODUCT TO THE STORE. CALL US FIRST!
1-888-670-6684
If you have questions regarding your product, require warranty
assistance, or have damaged or missing parts, please call our customer
service toll-free helpline. Contact us for assistance; we’re here to help.
IMPORTANT:Please read and understand this manual before any assembly. Before beginning
assembly of product, make sure all parts are present. Compare parts with packaging contents
list. If any part is missing, or if you have any questions, contact the service centre at
1-888-670-6684 (toll free).
Place all parts from the box in a cleared area and position them on the floor in front of you.
Remove all packing materials and place them back into the box. Do not dispose of the packing
materials until assembly is complete. Read each step carefully before beginning any assembly
and make sure you understand each step. If you are missing a part, please call our toll-free
number for assistance: 1-888-670-6684 between 9:00 am to 5:00 pm Eastern standard time
Monday through Friday.
4MODEL NO. 088-1934-4

5
ASSEMBLY
Step 1
Requires 1, 17, 18, A.
Insert two bolts Athrough the base plate 18 and post base 17, and secure into the
leg post 1. Tighten completely. Repeat procedure for the remaining three legs.
Note:The side of base plate with sunk hole should be towards outside and the bolt
should be level with the base plate.
A
Not actual size.
Step 2
Requires 1, 2, C, G.
Attach the side panel 2 to two legs 1 by inserting a bolt C through a metal
washer G, through the hole of the side panel 2, and secure into the leg 1.
Repeat procedure for the other side. Do not tighten completely.
Repeat procedure for the other side panel.
Not actual size.
1
AA
18
17
1
x 8
CGx 8 x 8
2
C
G
11
1
2

ASSEMBLY
Step 3
Requires 1, 3, D, G.
Attach the top crossbar 3 to the leg 1. Insert a bolt Dthrough a metal washer G,
through the top crossbar 3 and secure into the leg post 1. Do not tighten
completely. Repeat procedure for the remaining three legs. Note: The side
with “inside” label should be towards inside for top crossbar 3.
Not actual size.
Step 4
Requires 1, 3, 4, C, D, G.
Attach the top crossbar 4 to assembled frame 1 & 3 & 4. First insert a bolt D
through a metal washer G, through the top crossbar 4, through the top
crossbar 3 and secure into the leg post 1. Second, insert a bolt Cthrough a
metal washer G, through the top crossbar 4 and secure into the leg post 1.
Do not tighten completely. Repeat procedure for the remaining three legs.
6MODEL NO. 088-1934-4
Not actual size.
DG
J
x 4 x 4
inside
3
D
1
11
1
1
G
3
Don’t use any bolt for this step
CD
G
x 4
x 8
x 4
4
1
1
1
1
34
4
3
1
G
C
G
D

ASSEMBLY
Step 5
Requires 3, 5, C, G.
7
Step 6
Requires 3, 6.
Not actual size.
CG
x 8 x 8
5
35
5
3
CG
Attach top crossbar 5to the top crossbars 3. Insert a bolt Cthrough a metal washer G,
then through the bracket on the top crossbar 5, and secure into the top crossbar 3.
Do not tighten completely. Repeat procedure for the other side and other top
crossbar 5.
6
3
3
3
3
6
6
6
6
Attach the canopy bar 6to the top crossbar 3. Insert the canopy bar 6into the holes
on the top crossbar 3. Note: Two sides of the canopy crossbar insert into top crossbar
at the same time. Repeat procedure for the other two canopy crossbars 6.

ASSEMBLY
Step 7
Requires 2, 7, B, F, K, L, M.
Place the rear crossbar 7between the side panels 2. Insert a bolt Bthrough a
metal washer F, through the rear crossbar 7, and secure into the side panel 2.
Do not tighten completely. Repeat procedure for the other side.
Tighten all bolts from step 1 to step 7 by using the wrenches provided.
Note:The side with “inside” label and “U”shaped brackets should be
towards inside for the rear crossbar 7.
Step 8
Requires 8, 9, 10, 11.
Lay out the right arm 9, left arm 8, front support bar 10 and rear support bar 11.
Make sure that the labels marked “FRONT’’ on the arms and support bars are
all facing the front edge of the seat. Attach the seat support bars to the arms
by pressing the tabs on the ends of the front support bar 10 and rear support
bar 11, down into the brackets on the arms. Make sure they are securely
seated.
8MODEL NO. 088-1934-4
BF
x 4 x 4
FRONT
inside
9
10
11
9
11
11
10
9
8
Not actual size.
K
L
M
7
B
F7
2
2
2
inside

ASSEMBLY
Step 9
Requires 8, 9, 12, E, G, H, I, K, M.
Unfold the seat and back 12 and lay it on top of the assembled frame. Line up the
holes. Insert a bolt E(from outside to inside) through the bracket of the arm,
through a plastic washer I, through the side bar on the seat and back 12,
through a metal washer Gand secure with a nut H. Do not tighten completely.
Repeat procedure for the other side. Then securely tighten all bolts and nuts for
this step.
9
Step 10
Requires 11, 12.
Put up the back and pull down the pin on the U-shaped bracket on the rear support
bar 11 then slip the support tube on the back into the U-shaped bracket in place
per drawing.
EH
FRONT
I
9
8
8
12
12
G
H
E
12
11
11
12
12
x 2
GI
x 2
x 2 x 2
Not actual size.
K
M

ASSEMBLY
Step 11
Requires 5, 8, 9, 13, J, N.
First, set the hanging bars 13 into “S” hook. Note: the side with “TOP” label
towards “S” hook. Then the other ends of hanging bars into the pin of the arms.
Repeat procedure for the other remaning two hanging bars.
Second, hang the assembled body on the top crossbars 5.
Third, secure the lawn stack N into the ground. Repeat procedure for the other
three post legs.
Step 12
Requires 4, 14, 16.
Place the canopy 14 and cushion 16 on the swing as per drawing.
Note: the canopy should place under the bracket.
10 MODEL NO. 088-1934-4
Jx 2
TOP
J
9
8
5
13
13
13
13
13
13
J
13
17
18
1
1
11
8
Nx 16
N
Not actual size.
14
14
4
4
16
14

ASSEMBLY
Step 13
Requires 1，14, 15.
Insert the canopy side bar 15 into the canopy 14 as per drawing.
Fasten the ties attached to the canopy 14 to each leg post 1.
11
Step 14
Requires 7, 11, 12.
To convert the swing into a hanging bed, first push down the pin on rear
support bar 11. Second take out the back support tube from U-shaped bracket
on the rear support bar. Repeat procedure for the other side. Third, set the
support tube on the back into the U-shaped bracket on the rear crossbar 7 per
drawing. Repeat procedure for the other side.
When used as a bed, the seat assembly should be secured by these holders and
not allowed to swing.
15
14
15
14
1
12
11
11 12
12
77
12
7
12 12
7

12
MAINTENANCE
MODEL NO. 088-1934-4
• Though its powder-coated finish is rust-resistant, steel is prone to rust over time
with exposure to the elements. In case of rust or scratches, lightly sand the
affected area and apply touch-up paint. To maintain the finish, periodically apply
wax with a soft cloth.
• Wash frames with a mild solution of soap and water; rinse thoroughly. Do not use
bleach or solvents.
• CARING FOR OUTDOOR FURNITURE WITH CUSHIONS:
Wash frames and cushions with a mild solution of soap and water; rinse thoroughly.
Dry frame completely and allow cushions to drip-dry. Do not use bleach or solvents.
WARRANTY
This CANVAS product carries a one (1) year warranty against defects in workmanship
and materials. Trileaf Distribution agrees to replace the defective product free
of charge within the stated warranty period, when returned by the original purchaser
with proof of purchase. This product is not guaranteed against rust, wear or
breakage due to misuse and/or abuse.
Made in China
Imported by
Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8
WARRANTY