Car Solutions MB2019-NTG6.0-TC2 User manual

[e-mail] car-solutions.com
MB2019-NTG6.0-TC2
User Manual

IndexIndex
1. Main Spec
2. Block Diagram
3. Dimension
4. External Appearance
5. Connector Pin Assignment
6. Product Composition
7. DIP S/W Setting
8. Mode change
9. Touch Control
10. OSD(On Screen Display) Control
11. Install Manual
12. Q & A
[email protected]
car-solutions.com
car-solutions.com

1. Main Spec.1. Main Spec.
1. Input Spec. (MULTI VIDEO INTERFACE)
- 1 x Digital RGB Input (Navigation System output)
- 2 x A/V Input (External video source).
- 1 x CVBS(REAR CAMERA) Input. (Rear camera source)
- 1 x CVBS(FRONT CAMERA) Input. (Front camera source)
- 1 x Analog RGB Input (Navigation System output)
- 1 x LVDS Input. (Car Command System)
- 1 x Capacitive Touch Screen
2. Output Spec.
- 1 x LCD Output (LCD Operation)
- 1 x Resistive Touch
3. Power Spec.
- Input Power : 8VDC ~ 24VDC
- Consumption Power : 12Watt, Max
4. Switch Input mode
- Possible to select CAR model while switching mode by DIP S/W
- By button on the Commander in the car via CAN
[email protected]
car-solutions.com
car-solutions.com

2. Block Diagram2. Block Diagram
Scaler
(PIP)
MCU
LVDS
TX
INTERFACE
CAR
COMMAND
SYSTEM
LVDS
CAN
EEPROM
CAN
RECEIVER
LVDS
TX
CAR
TFT-LCD
LVDS
RX
RELAY
REAR CAMERA
POWER
RGB
NAVIGATION
SYSTEM
FRONT CAMERA
REAR CAMERA
[email protected]
car-solutions.com
car-solutions.com

3. Dimension3. Dimension
138mm
83mm
24mm
* This can change under manufacturer’s circumstance
138mm * 83mm * 24mm
[email protected]
car-solutions.com
car-solutions.com

4. External Appearance 4. External Appearance
POWER/CAN
Front
Camera
LED DIP S/W
PROGRAM
IMAGE
LVDS-IN
LVDS-OUTAnalog
RGB
R-TOUCH
Rear
Camera
[email protected]
car-solutions.com
car-solutions.com

4. External Appearance 4. External Appearance
LEDDIP S/W IMAGE
POWER/CAN
Front
Camera
LVDS-IN
LVDS-OUTAnalog
RGB
R-TOUCH
Rear
Camera
[email protected]
car-solutions.com
car-solutions.com

5. Connector Pin Assignment5. Connector Pin Assignment
*POWER Connect
① ACC(Yellow)
②REAR_POWER (Red)
③CAN-HIGH (Orange)
④CAN-LOW (Green)
⑤CAN-HIGH (Purple)
⑥CAN-LOW (White)
⑦REAR_DETECT (Brown)
⑧GND (Black)
① ② ③ ④ ⑤ ⑥ ⑦ ⑧
*NAVI Connect
① R DATA (Red)
②G DATA (Green)
③B DATA (Blue)
④SYNC (White)
⑤GND (Black)
⑥DMB IR (TX)(Green)
⑦DVD IR (RX) (Orange)
① ② ③ ④ ⑤ ⑥ ⑦
*Touch Connect
① Y-
②X-
③Y+
④X+
① ② ③ ④
[email protected]
car-solutions.com
car-solutions.com

6. Product Composition6. Product Composition
Interface 1 EA
RGB Navi Cable 1 EA OSD Board 1 EA
SPRINTER 8” / 12.3” / A-class 8”
[email protected]
car-solutions.com
car-solutions.com

6. Product Composition6. Product Composition
* Cable Sales(option)
[email protected]
car-solutions.com
car-solutions.com

7. DIP S/W Setting7. DIP S/W Setting
* ON : DOWN , OFF : UP
PIN FUNCTION DIP S/W Selection
1 NAVI ON : Not Used
OFF : Used
2 DVB-T ON : Not used
OFF : used
3 DVD ON : Not used
OFF : used
4 N.C
5 N.C
6
CAR type SEL Right Picture7
8
* DIP S/W Example
A class 8.0”Model
A class 12.3”Model SPRINTER 12.3”Model
SPRINTER 8.0”Model
[email protected]
car-solutions.com
car-solutions.com

8. Mode Change8. Mode Change
A-CLASS 12.3”
A-CLASS 8.0”
[email protected]
car-solutions.com
car-solutions.com

8. Mode Change8. Mode Change
SPRINTER 12.3”/ 8.0”
[email protected]
car-solutions.com
car-solutions.com

9. Touch Control9. Touch Control
Press and hold for more than 11 seconds on
NAVI, DVB-T, DVD screen.
(Note that it only works the first time after
switching screens)
+ Touch according to the shape coordinates.
14
Touch control - Calibration
OR
OSD menu -> Utility -> Calibration
[email protected]
car-solutions.com
car-solutions.com

9. 9. Touch ControlTouch Control
Press Touch(Anywhere)
Press Icon
DVB-T DVD
DVB-T/DVD Control
[email protected]
car-solutions.com
car-solutions.com

10. OSD(On Screen Display)10. OSD(On Screen Display) ControlControl
Mode State
First Menu Second Menu Third Menu
OSD Control Board
16
MENU When there is no OSD screen, pressing OSD ON
When OSD screen is displayed, press OSD EXITT
SEL Item Selection, Value Selection
UP Item up
Increase selected value
DOWN Item down
Decrease selected value
MENU SEL UP DOWN
[email protected]
car-solutions.com
car-solutions.com

10. OSD(On Screen Display)10. OSD(On Screen Display) ControlControl
17
First Menu Second Menu Third Menu Description
Config
NAVI-RGB DIGTAL-INAVI
:Setting the Connected NAVI Model
DVB-T(DMB) ELT_DVBT20
:
Setting the Connected DVB-T
Model
DVD ELT_980XU Slim
: Setting the Connected DVD Model
Reset Execute Reset to default value of Config
menu
OSD Config
[email protected]
car-solutions.com
car-solutions.com

10. OSD(On Screen Display)10. OSD(On Screen Display) ControlControl
18
OSD Option
First
Menu Second Menu Third Menu Description
Option
RearCam-Type
OEM Original Camera
ExtDevice Equipped with external
camera
RearCam-Power
ON + 12V continuous supply
AUTO + 12V supply only in Rear
camera mode
OFF + 12V off
RearCam-Det GEAR Detected by CAN
WIRE Detected by Rear-Det Wire
FrontCam-Type
OEM Original Camera
ExtDevice Equipped with external
camera
FrontCam-Power
ON + 12V continuous supply
AUTO + 12V supply only in Front
camera mode
OFF + 12V off
FrontCam-Det
CAN Detected by CAN
WIRE Detected by Front-Det Wire
[email protected]
car-solutions.com
car-solutions.com

10. OSD(On Screen Display)10. OSD(On Screen Display) ControlControl
19
First
Menu Second Menu Third Menu Description
Option
FrontCam-RcvOpt ON
After RearCam shows
FrontCam and returns to
previous state
OFF Disable feature
SteeringWheelBtn ON Select to use the “RETURN”
button.
OFF Disable feature
NAVI COM
HMS
FINE
:
Set up manufacturer of
woodworking device for
UART Touch use
OFF Disable feature
Reset Execute Option Menu all Reset
OSD Option
[email protected]
car-solutions.com
car-solutions.com

10. OSD(On Screen Display)10. OSD(On Screen Display) ControlControl
20
OSD Option -> FrontCam-RcvOpt
0 second = FrontCam-RcvOpt menu OFF
1~30 second = FrontCam-RcvOpt menu ON & time control
Front Camera Auto Mode
OEM
NAVI
AV1(DVB-T)
AV2(DVD)
REAR FRONT
OEM
NAVI
AV1(DVB-T)
AV2(DVD)
Select time of display
1~30 second
[email protected]
car-solutions.com
car-solutions.com