Car Solutions QNAVI-1CH-MAIN-2.5 User manual

Update Date 2014.07.24
Model QNAVI3-1CH-MAIN-2.5
Firmware Date
Car-solutions.com
www.car-solutions.com
[email protected]

Warning
Do not modify, dismantle or unintended
operation this system outside Qnavi After Sales.
Damage occurred by unintended operation
may cause Qnavi After Sales service void.
Always wear seatbelt. When the vehicle is
suddenly stop can cause injury.
Remove dust, oil, and waste on the display.
Incidental damages (including, without
limitation, consequential damages due to the
use of this unit and the dead loss of business
profit, changes, loss of memory contents, etc)
will not be taken responsibility.
•Any function that requires your prolonged
attention should only be performed after
coming to a complete stop. Always
stop the vehicle in a safe location before
performing these functions. Failure to do so
may result in an accident.
The engine is off while the system operates for
long time, battery may be discharged.
This product is not a substitute for your
personal judgment. Any route suggested by
this navigation system may never supersede
any local traffic regulation. Do not follow route
suggestions if the navigation system instructs
you to perform an unsafe or illegal maneuver.
Warning / Precautions!
Warning
Car-solutions.com
www.car-solutions.com
[email protected]

1. Features
2. Button Usage
3. How to use
3.1 Main Menu
3.2 Phone
3.3 Multimedia
3.3.1 Main
3.3.2 Music
3.3.3 Video
3.3.4 TDMB
3.3.5 AV
4. Setting
4.1 Main Menu
4.2 Rear Camera
4.3 Version
4.4 Volume
4.5 Start Program
4.6 Language
5. Trouble Shooting
6. Quality Warranty
Table of Contents
4
5
6
7
10
11
12
13
14
15
16
17
19
20
21
22
23
3
Car-solutions.com
www.car-solutions.com
[email protected]

1. Features
•Connect with various multimedia source
(2*Video Input, 1*Rear Camera Input, 1*A/V Out)
•Enable to input USB to play Music and Movies
•PAS(Parking Assistance System)
•Support full multimedia PIP(Picture in Picture) to maximize
convenience
•Enable to switch modes and control system via OEM buttons
4
Car-solutions.com
www.car-solutions.com
[email protected]

2. Button Usage
※ Functions of Buttons
5
Accept call / End call
Switching modes (QNAVI↔OEM screen)
Go to Phone Menu
Press 2 seconds or longer for restart
program
Press short, for OEM display
Press 2-3 seconds longer, back to QNAVI
※ In QNAVI, press these button below for OEM display
※ In QNAVI, if you press these buttons, no action.
Car-solutions.com
www.car-solutions.com
[email protected]

②③
④⑤
①
①Battery Voltage: Move to Battery Voltage in Q-SMART
②NAVIGATION: Refer to the navigation manual
③Q-SMART(Optional) : N
④Multimedia : For Music, Video, DTV, I-Pod, USB, A2DP
features
⑤SETUP : for user environment settings.
(Rear Camera, Volume, Start program language, etc)
※ Select menu buttons via Touch screen
3. How to use
3.1 Main Menu
Touch the UI to
switch OEM
6
Car-solutions.com
www.car-solutions.com
[email protected]

①Contacts: phonebook and call log
②Settings : Phone pairing and Phonebook synchronization
③To pick up phone or make phone call.
④To end phone call
※ In order to use Phone function, It is required to have a
Blue tooth set(Optional)
③④
①②
3. How to use
3.2 Phone
7
Car-solutions.com
www.car-solutions.com
[email protected]

①Call logs (Received voice calls, Dialed voice calls)
②Contact list.
①
②
8
3. How to use
3.2 Phone
Car-solutions.com
www.car-solutions.com
[email protected]

③
④
①
②
9
3. How to use
3.2 Phone
①Pairing : Press “PAIRING” button and input the password
(original setting : 0000), searching device through Bluetooth and
choose the phone.
※ Pairing : Connect user’s mobile phone with QNAVI
②Device list : To show connected device list
③Synchronization : To synchronize phone book on the phone and
QNAVI.
④Volume : Adjust call volume.
Press to move to main menu. (top left side)
Note
Car-solutions.com
www.car-solutions.com
[email protected]

③
④
①②
⑤
10
3. How to use
3.3 Multimedia / Main Menu
①Music : Play music on the connected USB
②Movie : Play movie files on the connected USB
③TDMB : Play DMB
④External input : Play multimedia files from external device
⑤A2DP(Optional) : Play music from connected mobile phone
(Refer to Page. 10)
Car-solutions.com
www.car-solutions.com
[email protected]

①
③④
⑤⑥⑦⑧
②
11
3. How to use
3.3 Multimedia / Music Player
①PIP function (Music player window and navigation can be
shown at the same time)
②Saved music list on the device
③Repeat – Repeat playlist, Repeat one music, No repeat
Comprise of 3 modes.
④Shuffle music.
⑤Play previous music
⑥Play / Pause
⑦Play next music
⑧Adjust volume
PIP(Picture In Picture)
Existing screen is displayed on the full screen at the same time as one are
displayed in inset windows.
Note
Car-solutions.com
www.car-solutions.com
[email protected]

①PIP function (Video player window and navigation can be shown
at the same time)
②Saved video list on the device
③Skip to the previous
④Rewind
⑤Play and Pause
⑥Fast Forward
⑦Skip to Next
⑧Adjust Volume
※ MP4 file /480P or 800X480 resolution are advisable.
Press the screen for the full screen
①
②
⑥
⑤
③④⑦⑧
12
3. How to use
3.3 Multimedia / Video Player
Note
Car-solutions.com
www.car-solutions.com
[email protected]

①
②
①PIP Function : Enable to see DMB and Navigation at the
same time.
②List of DMB Channel to play.
③Search DMB / DAB Channel.
④Select either DMB / DAB.
⑤Adjust Volume.
⑤
③④
Note
Press the screen for the full screen
13
3. How to use
3.3 Multimedia / TDMB
Car-solutions.com
www.car-solutions.com
[email protected]

④⑤②③⑥⑦⑧⑨
①
14
3. How to use
3.3 Multimedia / AV
※ Domestic model doesn’t support function ①~⑧
①PIP function (Video player window and navigation can be shown
at the same time)
②Turn of AV power
③Select AV remote control button UP
④Select AV remote control button DOWN
⑤Go to previous condition
⑥Select / OK
⑦Search available device
⑧Select AV remote control button RIGHT
⑨Select AV1 or AV2
Note
Touch video for full screen
Car-solutions.com
www.car-solutions.com
[email protected]

①Rear Camera : Setting rear camera
②Version : Hardware system and firmware version
Factory Menu (only can be set by installer)
③Volume : Adjust speaker volume
④Start Program : Setting start program while booting program
⑤Language : Select language for QNAVI program
①
③
②
④
⑤
⑥
15
4. Settings
4.1 Menu Display
Car-solutions.com
www.car-solutions.com
[email protected]

①②
①Set parking guide line ON / OFF
②Adjust the position of parking guide line
16
4. Settings
4.2 Rear Camera
Car-solutions.com
www.car-solutions.com
[email protected]

①FACTORY : Program upgrade and setting external devices
※Only for installer-PW : 4291 (Not for User)
②INITIAL : QNAVI initialization
③TOUCH CALIBRATION
④UPGRADE
⑤A/S MODE
- QNAVI : QNAVI mode Usage
- ORIGINAL : Original mode Usage(Only use QNAVI via touch)
※ When select the original mode, can see the text as At the top of
the screen
①②③
④
※ You can only allow to operate system via touch in ORIGINAL MODE
⑤
17
4. Settings
4.3 Version
Car-solutions.com
www.car-solutions.com
[email protected]

※ Put latest upgrade files in SD Card, and insert the QNAVI
- Check the Box you want to upgrade(among OS, APP, BT, FW).
And select the START UPGRADE
18
4. Settings
4.3 Version / UPGRADE
Car-solutions.com
www.car-solutions.com
[email protected]

19
①Reduce QNAVI volume
②Increase QNAVI volume
4. Settings
4.4 Volume
①②
Car-solutions.com
www.car-solutions.com
[email protected]

20
①Select OEM or Q-Navi when turn on the ignition
②Select MAIN MENU or GPS when start the QNAVI
①
②
4. Settings
4.5 Start Program
Car-solutions.com
www.car-solutions.com
[email protected]