Carnation CR1800 User manual

Carnation Enterprises
Contact Phone: [phone]
E-mail: [e-mail]
Website: www.carnation-inc.com
Bank-Grade Bill Counter
User Manual CR1800
CARNATIONCARNATION
CARNATIONCARNATION

Thank you for choosing the CR1800 Bank-Grade Bill counter.
This machine represents the latest development in Carnation tech-
nology. In order to make the best use of this bill counter and its
counting capabilities, please read the manual carefully, and familia
-rize yourself with the operating procedures.
Safety ...................................................................................................1
Unpacking.............................................................................................2
........................................................................................2
Exterior .................................................................................................3
Counterfeit Detection Functions............................................................6
Feeder Adjustment................................................................................8
Parts Replacement...............................................................................8
Maintenance.........................................................................................10
Specifications
Correct way to place banknote in feeder...............................................5
Troubleshooting.....................................................................................9
To avoid damage to the machine and/or personal injury, read the
following carefully before the first use.
1. Place the unit on a solid flat surface. Don't place the unit on a shaky
or vibrating surface.
2. Before moving the unit, please disconnect the power cord. Damage
to power cord may result in fire and/or electric shock.
3. Keep the unit away from volatile gases or flammable materials. Keep
the unit away from high humidity and strong sunlight, as it may cause
machine's failure.
4. In case of water spill, stop operating the unit immediately. Switch it off,
and disconnect the power cord, then contact the service center for help.
5. Plug the power cord into a grounded outlet only. If the unit is not in use
for a long period of time, please keep it switched off and unplugged to
avoid possible damage.
6. Please be careful to avoid any foreign objects, such as coins or staples,
falling into the unit, as it may cause damage to the machine.
7. It is strictly prohibited for anyone except authorized technician to open/
service the machine. This will render any remaining warranty void and
may cause malfunction or injury.
1
Preface
Contents
CARNATIONCARNATION CARNATIONCARNATION

3
1.Bill counter
2.User manual
3.Power cable
4.External display (Optional)
1pc
1pc
1pc
5.Cleaning brush
6.Resistance piece
1pc
1pc
1set
2
Unpacking
8.Adjusting screw
9.Power cord jack
10.Fuse
11.External display port
12.ON/OFF switch
10
1. Front View
2. Rear View
8
9
12
11
1.Hopper
2.Handle
3.Top cover
4.Control panel
5.LCD display
6.Banknote receiving wheel
7.Stacker
1
2
3
4
6
7
5
Specifications
Counting Speed: 1000 Notes/Minute
Feeder Capacity: 200 Notes Holder Capacity: 200 Notes
Power Supply: 110V/60Hz
Power Consumption: Working ≤ 90W Sleeping < 3W
Operating Temperature: 32 F-104 F(0℃-40℃)
Humidity: 60%~90%
Noise: <60dB
Weight: 15.9lb(7.2kg)
Dimensions: 10x12.2x7 in(256×310×177mm)
Banknote Size: Min: 1.96×4.33 in(50×110mm)
Max: 3.34×7.08 in(85×180mm)
Banknote Thickness: 0.0029~0.0059 in(0.075~0.15mm)
Exterior
CARNATIONCARNATION
CARNATIONCARNATION

45
3、Operating
For best results, fan your banknotes in a progressive stair-like manner with the
CF
MG UV IR
MT DD
COUNT
BATCH C
2
1
3
4
3. LCD display and Panel
RESET Start counting/Clear the number of counted banknotes :
COUNT Count banknotes without detecting functions:
AUTO Auto/Manual start selection:
SLEEP Standby mode ON/OFF:
ADD Add function ON/OFF:
BAT/C Batch function ON/OFF,or cancel batch number:
PCS
PCS
UV
MG
IR
MT
AUTO COUNT
DD
BAT
ADD
CF Function selection key-Press CF, then press UV, MG, IR, MT, DD :
Correct way to place banknotes in feeder
front banknote in the lower position and the last banknote in the higher position.
Place the banknotes in the feeder.
1: Detection Function Indicator:Detecting functions ON/OFF
2: Batch/Add display:Display batch value/accumulated value
3: Main Counting display:Display counted banknotes
4: Detection Function/BATCH Panel
0,1,2,3,4,5,6,7,8,9 Keypad for entering BATCH values :
CARNATIONCARNATION
CARNATIONCARNATION
100
√
100
√
100
100
to turn these functions ON/OFF.

67
Counterfeit detection functions
CARNATIONCARNATION
CARNATIONCARNATION
CR1800 has five counterfeit detection functions - Ultra-Violet, Infra-Red,Mag-
netic,MT and Dimensions. User can select a combination of counterfeit detec-
tion functions according to counting requirements. Press CF key, then press
UV, MG,IR,MT or DD key to turn these functions ON/OFF.
When the machine encounters a counterfeit banknote, it will stop and beep.
The suspicious banknote is the top banknote in the banknote stacker-it is not
included in the count.Counting may be resumed by pressing RESET button.
COUNT function allows counting without counterfeit detection(For very worn/
dirty bills or non-currency items.
■Photo 1
PCS
PCS
MG
AUTO COUNT
UV
IR
MT
DD
BAT
ADD
PCS
PCS
MG
AUTO COUNT
UV
IR
MT
DD
BAT
ADD
■Photo 3
■Photo 4
PCS
PCS
MG
AUTO COUNT
UV
IR
MT
DD
BAT
ADD
■Photo 5
PCS
PCS
MG
AUTO COUNT
UV
IR
MT
DD
BAT
ADD
■Photo 6
PCS
PCS
MG
AUTO COUNT
UV
IR
MT
DD
BAT
ADD
■Photo 2
PCS
PCS
MG
AUTO COUNT
UV
IR
MT
DD
BAT
ADD
ADD Function
Adds consecutive batches of banknotes. Activate by pressing "ADD"
button. When enabled, the latest batch count will remain on the dis-
play even if banknotes are removed from the banknote stacker.
The next batch will be added to the current count. When the number
of banknotes reaches 9999+1, the count is reset to 0. When ADD
function is disabled, the count will reset to 0 when the new batch is
run.
BATCH Function
Batch function is used to count out a set number of banknotes at a
time. Activate by pressing "BATCH/C" button("BAT" symbol on the
LCD display). Use the number buttons to set the batch value in the
range of 1-100.

9
Feeder Adjustment
The adjusting screw of the feeder aperture on
the back cover has already been set at the factory.
You may need to adjust the feeder aperture if the
counter jams frequently, or the bills are flying out
during counting. Please consult technical support
before attempting any adjustment.
The adjusting screw is very sensitive, move only one notch at a time!
Parts Replacement
1.The resistance piece needs to be replaced
when worn. Pull out the banknote feeder,
press the banknote sliding board down,
and replace the worn resistance piece.
2. In case the counter doesn't turn on, check the
fuse. The fuse is located under the power ca-
ble socket.
Fuse holder
CARNATIONCARNATION
CARNATIONCARNATION
8
The machine will automatically perform a system self-test after it is turned on.
Most error codes are caused by blocked or dusty sensors. Check for banknote
jams and use a brush to clean the sensors, then restart the machine.
Troubleshooting
Code Problem Solution
E01/02 Left/right counting sensor Clean dust off sensor/ Replace sensor
E03 Code disc sensor Clean dust off sensor/fasten sensor/
replace sensor
E04 Feeder sensor Clean the obstruction/ Test MG function
E05 Receiving sensor Clean dust off sensor/ Replace sensor
E07
The machine is operated in a strong
magnetic field.
Keep it away from the strong magnetic
field.
Replace sensor.
E10
The machine is operated under direct
sunlight. Keep it away from direct sunlight.
UV sensitivity Lower UV sensitivity
MG sensor
E11 Button Open top cover, and fasten the connector
of button/ replace the button.
BF Wheels are running without banknotes. Press "RESET" and re-count.
EE1 Counterfeit or suspicious banknote.
Banknote without UV feature.
Remove and press "RESET" to continue
counting. If the machine stops frequently,
adjust the sensitivity level.
EE2 Counterfeit or suspicious banknote.
Banknote without MG feature.
Remove and press "RESET" to continue
counting. If the machine stops frequently,
adjust the sensitivity level.
EE3 Counterfeit or suspicious banknote.
Banknote without IR feature.
Remove and press "RESET" to continue
counting. If the machine stops frequently,
adjust the sensitivity level.

11
10
EE4 Half-piece or torn banknote.
Left/right counting sensor
Remove and press "RESET" to
continue counting.
Clean dust off sensor/ Replace sensor
EE5
Banknotes do not feed into the
machine smoothly, or banknotes
are not coutned accurately.
Adjust the feeder according to
instructions on page 9.
EE6
Counterfeit or suspicious banknote.
Banknote without or with low MG
feature.
Remove and press "RESET" to continue
counting. If the machine stops frequently,
adjust the sensitivity level.
EE7 Banknotes are not fed correctly into
the feeder.
Arrange banknotes according to
instructions on page 5.
EE8
Feeding board is not in the horizontal
position or banknote length not within
the range (110-180mm)
Adjust the position of the feeding board.
EE9
Feeding board is not in the horizontal
position or banknote width not within
the range (50-85mm)
Adjust the position of the feeding board.
EEA Some banknotes are glued together. Remove and press "RESET" to
continue counting.
EEB Some banknotes are broken Remove and press "RESET" to
continue counting.
1.If operated at temperature below 68 F(20℃), please allow three minutes for
warm-up.
2.The machine must be operated in a well-ventilated area. Keep it away from
direct sunlight and strong magnetic fields.
3.Do not apply oil to machine’s rubber parts, as it may cause malfunction.
4.Clean all sensors and magnetic head at least once a week with a soft brush .
Maintenance
CARNATIONCARNATION
CARNATIONCARNATION