CarNavi-Tech NavLine SE-MB204B User manual

Mercedes-Benz Parking Assistant System Easy Operation Manual
——————————————————————————————————————————————————————————
Mercedes-Benz
Parking Assistant System
Easy Operation Manual
SUNE TECHNOLOGY ELECTRONIC CO.,LTD
No.9,Lane 606,Anping Rd,Tainan City
70849,TAIWAN
TEL:[phone] FAX:[phone]
Http://www.sune-tech.com
Shop http://www.carnavi-tech.com
SKYPE:sune_tech or hsin_han99
NavLine Model: SE-MB204B
For ALL NTG4.5/4.7 system
W156/W166/W172/W176/W204/W207/W212/W218/W246/C117
CarNavi-Tech

Installation(For W246/176/117/W156)
1.Use tool remove Left and Right Air-
conditioning vent
2.Remove parts
3.Remove screws(Left and Right) than you can remove Audio system
CarNavi-Tech

4.Please take away connectors than
plug into module male connector than
plugin original comand connector
6.Remove original blue LVDS than plug
into module LVDS-out
connector,module LVDS from module
LVDS-in to comand Grey connector
7.install module and camera than
check system working or not than
replace all accessories
Installation
5.Original connector plug into module
Female connector
CarNavi-Tech

1、Products
This section describes the appearance of the company's products, physical picture, as well as our products more
special.
Thank you for using our products, after you get the product, please carefully check the open standard
accessories listed below are complete
1.1.Accessory list
Sequence No. . Name Picture Amount
1 SE-MB205A
interface 1
2
Original
Plug&Play
car power
adapter cable
1
3 LVDS video input 1
1.2.Features and Performance
products Model :2011y Mercedes-Benz C-Class,S-class,B-class,CLA-class,A-Class,GLA-Class,CLS-class
with NTG4.5/4.7 audio20 with 5.8inch and 7inch system.
All features of this product is switched by the original car audio buttons.
achieve the original car reversing radar, HD reversing Parking Assistant System.
1 x Rear camera or 360 video input,1 x Front camera input and 2 x Video input easy to operate
360 panorama function
Special harness Plug & Play 。
1
CarNavi-Tech

2、Mercedes-Benz Parking Assistant System Easy Guide
2.1.Steering wheel buttons Operating Instructions
When you plug the car keys, start the car, the system will automatically power on. Default
to the original car interface, long press the red circle around the position of the steering
wheel "Return" buttons 1.5s into the video input status,short press back to the original
car audio interface status,
choose according to their needs require video input.
3.Radar and track results
This product uses a dedicated car reversing camera, are customized products, precision parking assist
trajectory to allow customers a more intuitive understanding of the reverse case, the effect is as
follows:(When you on Rear camera status the screen will Automatic withdrawal when Speed up to
10KM)
CarNavi-Tech

Mercedes-Benz Parking Assistant System Installation Operating Instructions
——————————————————————————————————————————————————————————
4、DIP Switch and Diagram Description
Note: Customers can function DIP switch status to select according to their
actual needs.
4
Control
Box
Monitor
Original LCD cable
LVDS IN
Camera module SE-MB205
TO
LVDS OUT
Offered LCD cable
power
If your Mercedes-Benz car without parking sensor or with Manual transmission,it will not auto change to
camera video.
you must setting to follow:
1. turn Dip8 UP on
2. Blue wire connection to back light(12V)
CarNavi-Tech