Carrier Air-L Series User manual

Carrier APA.,Ltd
Air-conditioning Practical Application Service Co.
Name of each parts
Before Installation
Istallation
Electric wiring
Check Before Driving
Wiring Diagram
CONTENTS
(EL070AjEL090AjEL 120AjEL 135A)
Air-L Series
ver.2.0A
Installation Manual

(bolt, nut, wahser, spring washer, screw, sleeve, blade pin,
tie band, cable tie, drain hose, lagging sheet, Aluminum tape)
*Accessories
Supply
Scooper
Return
Scooper
Circuit -~~+--~~
Breaker
fixing bar
Condensor
Check the name of parts.
Name of each arts

2
<to
supply Scooper
return Scooper
[> Checka proper spacewhere will be installedthe air-con.
[> Thespaceshoud be free from any distractions;safty guide or emergency exits.
[> Checkthe air supply hole and return hole on top of the elevator.
(Hole sizeis reconnented '370mm x 60mm')
Check top of the elevator.
Before Installation

3
[> The angle is mounted on H-beam by bolt(10mm bolt, nut, washer,spring washer).
e.2. Mount the
~pplyhOle
[> There is a proper spacewhere will be installed the air-con.
for installi1.
Thefollowingstep of instructionsmust be performed.
Installation

4
C> CD EmergencyDrain hose is connected with pipe of unit
o Remoteusb cable is connected with usb socket of controller for wirelesscommunications.
4. Emergency Drain hose / USB Cable
C> Put unit on the angle with anti-vibrator.
3. Mount Unit.
Thefollowingstep of instructionsmust be performed.
Installation

5
installation.
6.5(00
Emergency
Drain hose
l> Connecta remote cablewith wirelessgender.
Drain hose / USB Cable 5.
Thefollowingstep of instructionsmust be performed.
Installation

6
[> Flexibleduct isConnectedwith scoope
[>Cut flexible duct to proper length. pn(lth~f1@'f'lPflf1'<--fllfl~I-r'''"t''lllnHnn place,usually1m- 15m.
(too long length makeswind speeddown.)
9. Flexible duct connection.
[> CD 8" return duct is connected with return hole by sus band and cable tie.
o 6" supply duct is connected with supply hole by sus band and cable tie. And cover duct
with Aluminum sheet.
8. Flexible duct connection.
The following step of instructions must be performed.
Installation

7
8J
Ullll ~
IlIfi ~
UlQ)
UlUl *Wireless remote
UlOi
tlUl
C> It can control all of air-con function in the elevator as wireless.
Wireless remote connection
long sleeve
blade pin
C> Main power cable is 2 black wires. It is from circuit breaker in the unit. When connect it with
Main power cable,use long sleeveand blade pin.
ower
Make sure that all power supply to the unit is disconnected before performing any work on the unit to void the possibility
of shock or injury or damage to the equipment.
Wirin
Electrical wiring