Carrier TST-EEPC06111SCS00 User manual

Carrier
Room Thermostats
TST-EEPC06111SCS00
TST-EEPD06111SCS01
TST-EEPC06121SCS00
TST-EEPD06121SCS01
Owner’s Guide
Turn to the Experts.
SM
Series 6 Classic and Deluxe Designs
Control at Your Fingertips

CONGRATULATIONS
INTELLIGENT
,
EASY TO USE
Congratulations on your purchase of a new Carrier
thermostat. Your new thermostat combines computer-
like
intelligence with extremely simple operation in an elegant
package. Designed to maximize perf
ormance, your Carrier
thermostat provides reliable, accurate temperature control
wile blending in with the surrounding
decor
. As you read on
you will quickly find how easy it is to set up and operate your
new thermostat and enjoy your climate controlled
environment
COMFORT AT YOUR COMMAND
Carrier has met the needs worldwide with their
programmable thermostats. Controlling your heating and
cooling system at the touch of a button, this
powerful device
delivers comfort year round.
MAKING LIFE EASIER
Take a few minutes to review the f
eatures and functions
listed in this manual. Carrier gives you control over your
comfort with simple instructions, responsive push buttons
and an easy to read backlit display (on electronic models).
Once set, this thermostat reliably monitors indoor
temperature and responsively meets your comfort demands.

01: Remote
Sensor
MODEL NOMENCLATURE
TST - E S N C 06 2 1 1 S C S 01
TST
: Thermostat
C: Classic series
D: Deluxe series
N: Non-programmable
P: Programmable
M:Mechanical
E:Electronic
E:Embedded
S:Surface mount
1: AC85V~260V
2: AC24V
1: Cooling water 2 pipe
2: Cooling water 4 pipe
3: Direct Expansion

SET
Shows room temperature,
desired temperature, and
other feature information
as required.
FAN Button chooses
between AUTO
,
LOW
,
MED
,
HI
fan operation.
Power Button
Turn on/off
thermostat
MODE Button selects
between HEAT,COOL and
Ventilation operation
.
Up Button
Increase the desired
temperature setting.
Down Button
Decrease the desired
temperature setting.
SET is displayed
while setting your
desired temperatures
or flashed while
setting mode.
Cool mode
Heat mode
Ventilation mode
: AUTO
: LOW-speed
: MED-speed
: HI-speed
Clock button
Current Time.

SETTING AND OPERATING
Setting your temperature set points
1.Press the UP or DOWN button.
The LCD readout will be illuminated and the heating or
cooling temperature set point will be displayed, but will not
change. Next to the temperature display,
or indicateswhich temperature
set point is being displayed.
2. Continue to press the UP or DOWN
buttons until your desired heating or cooling temperature set
point is displayed.
3.(Only for Deluxe series)Press the MODE button to select
the second temperature setting (either HEAT or COOL).
4.(Only for Deluxe series)Press the UP or DOWN buttons
until your second desired temperature set point is displayed.
-1-
SET

SETTING AND OPERATING
NOTE: Your COOL setting must be at least 2℃
℃℃
℃(4℉
℉℉
℉)
higher than your HEAT setting. Your thermostat will
automatically change your
previously set temperature to
maintain that 2℃
℃℃
℃(4℉
℉℉
℉) difference.
Setting fan operation
Press the FAN button to chooses
between AUTO, LOW, MED or HI
fan-speed,When the AUTO mode is
selected, Auto LOW-speed When the
difference between room-temperature
and setting-temperature exceed 1℃(2℉), Auto MED-speed
When exceed 2℃(4℉), Auto HI-speed When exceed 3℃(6
℉).
RT
-2-

SETTING AND OPERATING
Setting mode operation
1. Press the MODE button.
2. On the LCD readout, the symbols
, , or will flash as the MODE
Button is pressed.
Set Current Time
Press clock button once, hours flash – set the hours using
the Up/Down key .
Press clock button again, minute flash –
set the minute using
the Up/Down key.
Press clock button again, day flashes – set day using the
Up/Down key.
-3-
SET

SETTING AND OPERATING
Programming Thermostat Schedules
Before programming the thermostat, plan the thermostat
daily schedule. The schedule is divided into 7 days
(Monday
through Sunday). Each day has 4 time periods (1,2, 3, 4
).
Each time period has a start time, heating
set point, and
cooling set point. Fill in Table 1 as an aid to programming
the
daily schedules.
To program the daily schedules,perform the following
procedure:
1. Enter programming mode by hold the clock button
down
for 5 seconds. “Wen” and ”--:--” will be displayed. Use
up and
down buttons to select the day of the schedule. Press
The
clock button TIME annunciator will flash.
NOTE: If a programming button is not pushed for
90
seconds, the thermostat will exit programming mode.
2. Press the Up and Down buttons to set the start time for
the schedule day and period shown.
-4-

SETTING AND OPERATING
3. Press the clock button once, The heating set
point and the
heat annunciator will be displayed. Press the Up
and
Down buttons to set heating set point.
4. Press the clock button once, The cooling set
point and the
cool annunciator will be displayed.
Press the Up and Down
buttons to set
5. Press the clock button to advance to the next time period.
6. Perform Steps 2 through 5 until the times and temperature
set points have been entered for the entire day.
Press the
clock
button and display”copy”
,use up and down button to
select the day for copy, p
ress the clock button to confirm.
7. Repeat Steps 2 through 6 to program the remaining
schedule days.
-5-

SETTING AND OPERATING
SCHEDULE
1 2 3 4
DAY OF
WEEK Tim/Heat/Cool Tim/Heat/Cool Tim/Heat/Cool Tim/Heat/Cool
Monday / / / / / / / / / / / /
Tuesday / / / / / / / / / / / /
Wednesday / / / / / / / / / / / /
Thursday / / / / / / / / / / / /
Friday / / / / / / / / / / / /
Saturday / / / / / / / / / / / /
Sunday / / / / / / / / / / / /
-6-
Table 1 Daily Schedule Planner