Cartizan CPI-BM-NBT User manual

LVDS-OUTAMT LVDS-IN
HDMI-IN DIP-WS
USB/VIDEOCAN/POWER
Model No.: CPI-BM-NBT
V1.0
Connect phone/USB stick
Rear camera in
Front camera in
Provided LVDS Cable
Connect to
OEM screen
MIC
OEM LVDS cable
Connect to
head unit
OEM quadlock connector
Connect to OEM
quadlock connector
Camera 12V out, supply power for front & rear
view camera
ACC 12V out, always supply power
for external A/V device
Reverse detect, connect to reversing light positive
if "camera 12V out" does not output 12V when shift
to R gear, and enable "Activate R-CAM through
Reversing Lights" in settings
GND
OEM head unit
NOTE! Please DO NOT
stick on the metal part
Audio out（reserve.
Connect to factory AUX port only
if there is no sound for
the interface )
Screen size 1 2 3 4
6.5 inch
8.8 / 10.25 inch
DIP #7: Original MIC (OFF△), Add-on MIC (ON▼)
DIP #5, #6, #8 all set to OFF△
OFF OFF
OFF
ON
ON
ON
ON ON
DIP SWITCH SETTINGS
Press and hold "MENU" or "BACK"
on iDrive controller for 3S to switch menu.
It will also switch to add on interface


SWITCH:

OEM RADIO AUDIO SETTINGS:
1. For car models with stock AUX port, make sure source switch to “AUX” mode on original car stereo for audio transmission before
using the integration.
2. For car models with an AMI port, please plug in "AMI to AUX cable (sold separately)" then switch audio source to AMI mode.
3. For car models without AUX or AMI port (e.g. BMW EVO, Mercedes NTG 5, etc.), please plug in the provided "AUX-USB" adapter then
switch audio source to "AUX-USB" mode.
WHAT'S IN THE BOX
Power/CAN harness USB/Video cable LVDS cable WiFi/BT antenna
Press and hold the "BACK" button for 10s will restart the integration immediately
QUICK RESTART TIPS:
Main unit
Dimension: 148*94*22mm