SHENZHENGUIYUANINDUSTRYDEVELOPMENTCO.,LTD
RFWireless Remote Control RadioController/ Transmitter& Receiver
PackageInclude:
1xReceiver: S1U-DC06-ANT1/S1U-DC09-ANT1/ S1U-DC12-ANT1/ S1U-DC24-ANT1(1 Channel/Three ControlModes)
2xTransmitter: C-2
1xUser manual
Feature:
Wireless control,easy toinstall
ControlLights,Motors,Fans,electricallyoperated Doors/Locks/Windows/Blinds/Cars orOtherApplianceswithvoltage AC110~240Vor
DC0~28V.
You can turn on/off thereceiver withtransmitter(remotecontrol)fromanyplacewithinareliabledistance;the wirelessRFsignalcanpass
through walls, floorsand doors.
Withcharacteristics of reversepower protection and over currentprotection
Audible/ visualindication
Usemicrocontroller modelof EM78P156, an 8-bitmicroprocessor designed and developed withlow-power and high-speed CMOS technology.
Reliablecontrol: The transmitter (Encoding) and the receiver (Decoding) usean8-bitcode.
One/severaltransmitterscancontrolone/severalreceiverssimultaneously.
If you usetwoor more receiversinthe sameplace, you can setthemwithdifferentcodes.
Transmitting Frequency: 315MHz /433MHz
Receiver:
ModelNo.: S1U-DC06-ANT1/S1U-DC12-ANT1/ S1U-DC09-ANT1/ S1U-DC24-ANT1
Channel: 1CH
ControlModes: Toggle, Momentary, Latched
Coding Type: Fixed code
Coding Setting:Bylearning
Power Supply(Operating Voltage):DC6V(S1U-DC06-ANT1),DC12V 1V(S1U-DC12-ANT1),DC9V 1V(S1U-DC09-ANT1),DC24V 1V
(S1U-DC24-ANT1)
Working Voltage Range of Relay:AC110~240V or DC0~28V
PCBSize:67mm x50mm x18mm
CaseSize: 75mm x54mm x27mm
StaticCurrent: ≤6mA
MaximumWorkingCurrent: 10A
LengthofExternalTelescopicAntenna: 80mm /305mm (stretch)
The receiver hasfarther working range withexternaltelescopic antenna!
Transmitter:
ModelNo.: C-2
Channel: 2CH
RemoteControlDistance: 100m/ 300ft (theoretically)
Encode:Fixed code by soldering
Unit Size: 58mm x39mm x16mm
Power Supply: 1x23A-12V battery(included,canbe usedfor 12months)
Usage:
Setting differentcontrolmodes(We havesetthe receiver asTogglecontrolmode before delivery.Ifyou wanttouseother controlmodes,do as
following operation):
Setting controlmode Toggle:ConnectJumper-2.
Controlmode Toggle:Press ->On; Press again->Off.
Press button 1:Turn on the relay(connectBand C, disconnectAandB)
Press button 1again: Turn off therelay(disconnect B and C,connectA andB)
Setting controlmode Momentary:Connect Jumper-1.
Controlmode Momentary: Pressand hold->On; Release->Off.
Press and holdbutton 1:Turn on the relay(connectB and C, disconnect Aand B)
Releasebutton 1:Turn offthe relay(disconnectBand C,connectAand B)
Setting controlmode Latched:Disconnect Jumper-1 and Jumper-2.
Controlmode Latched:Press ->On, other relays Off;Press another button ->Off.
Press button 1:Turn on the relay(connectBand C, disconnectAandB)
Press button 2:Turn off the relay(disconnectBand C,connectAandB)
Wehavelearned remotecontroltothe receiver. If you don’t wantthe receiver towork withtheremotecontrol, you can deleteallcodesofremote
controls,whichare stored inthe receiver.
Operation:Press andholdthe button of receiver untilsignalLEDflashesslowly; releasethe button,LEDkeeps slowflash.That meansallstored
codeshavebeen deleted successfully.
