CaryMart S2X-DC06-ANT2 User manual

SHENZHENGUIYUANINDUSTRYDEVELOPMENTCO.,LTD
Http://www.
carymart
.com
E
-
Mail:sale@
carymart.
com
RFWireless Remote Control RadioController/ Transmitter& Receiver
PackageInclude:
1xReceiver: S2X-DC06-ANT2/ S2X-DC09-ANT2/ S2X-DC12-ANT2/ S2X-DC24-ANT2(2 Channel/ Four ControlMode)
1xTransmitter: CB-2
1xUser manual
Feature:
Wireless control,easy toinstall
Direct power output; controlLights, Motors, Fans,electricallyoperatedDoors/ Locks/Windows/Blinds/ Cars or Other Appliances.
You can turn on/off thereceiver withtransmitter(remotecontrol)fromanyplacewithinareliabledistance;the wirelessRFsignalcanpass
through walls, floorsand doors.
Withcharacteristics of reversepower protection and over currentprotection
Audible/ visualindication
Usemicrocontroller modelof EM78P156, an 8-bitmicroprocessor designed and developed withlow-power and high-speed CMOS technology.
Reliablecontrol: The transmitter (Encoding) and the receiver (Decoding) usean8-bitcode.
One/severaltransmitterscan controlone/severalreceiverssimultaneously.
If you usetwoor more receiversinthe sameplace, you can setthemwithdifferentcodes.
Transmitting Frequency: 315MHz /433MHz
Working distanceoftransmitter andreceiver withexternalextend antenna: 2000M/ 6000ft (theoretically)
Receiver:
ModelNo.: S2X-DC06-ANT2/ S2X-DC09-ANT2/ S2X-DC12-ANT2/ S2X-DC24-ANT2
Channel: 2CH
ControlModes: Toggle, Momentary, Latched, Momentary+Toggle
Coding Type: Fixed code
Coding Setting:Bylearning
Power Supply(Operating Voltage):DC6V(S2X-DC06-ANT2),DC12V 1V(S2X-DC12-ANT2),DC9V 1V(S2X-DC09-ANT2),DC24V 1V
(S2X-DC24-ANT2)
Output:DC6V (S2X-DC06-ANT2), DC12V (S2X-DC12-ANT2), DC9V (S2X-DC09-ANT2), DC24V (S2X-DC24-ANT2)
PCBSize:67mm x50mm x18mm
CaseSize: 75mm x54mm x27mm
StaticCurrent: ≤6mA
MaximumWorkingCurrent: 10A/ eachchannel
ExternalExtendAntenna:
FrequencyRange: 300~450MHz
Impedance: 50Ω
Antenna Length: 15cm
CableLength: 150cm
Weight:35g
Anti-interference,waterproof, shielded wire set inside
Magneticstand design for easytoinstall
Transmitter:
ModelNo.: CB-2
Channel: 2CH
RemoteControlDistance: 1000m/3000ft (theoretically)
Encode:Fixed code by soldering
Unitsize: 135mm x42mm x25mm
Power Supply: 1x6F22-9V battery(included,canbe usedfor 12months)
Usage:
Setting differentcontrolmodes(We havesetthe receiver asTogglecontrolmode before delivery.Ifyou wanttouseother controlmodes,do as
following):
1) Setting controlmode Toggle:OnlyconnectJumper-2.
Press bigbutton:Turn onthe relay1,terminalOUT1(A&B)outputsDC power.
Press bigbuttonagain: Turnofftherelay1,terminalOUT1no output.
Presssmallbutton: Turnon therelay2, terminalOUT2(A&B)outputs DC power.
Presssmallbutton: Turnoffthe relay2, terminalOUT2no output.
2) Setting controlmode Momentary: Only connect Jumper-1.
Press and holdbigbutton:Turn onthe relay1,terminalOUT1(A&B)outputs DC power.
Releasebigbutton:Turn off the relay1, terminalOUT1no output.
Press and holdsmallbutton:Turn on the relay2,terminalOUT2(A&B)outputsDC power.
Releasesmallbutton: Turn off therelay2, terminalOUT2no output.

SHENZHENGUIYUANINDUSTRYDEVELOPMENTCO.,LTD
Http://www.
carymart
.com
E
-
Mail:sale@
carymart.
com
3) Setting controlmode Latched: Do notconnectJumper-1 and Jumper-2.
Press bigbutton:Turn onthe relay1,terminalOUT1(A&B)outputsDC power.
Turn offthe relay2,terminalOUT2no output.
Presssmallbutton: Turnon therelay2, terminalOUT2(A&B)outputs DC power.
Turn offthe relay1,terminalOUT1no output.
4) Setting controlmode Momentary+Toggle: ConnectJumper-1 andJumper-2.
Controlmode Momentary(Channel1):
Press and holdbigbutton:Turn onthe relay1,terminalOUT1(A&B)outputs DC power.
Releasebigbutton:Turn off the relay1, terminalOUT1no output.
Controlmode Toggle(Channel2):
Presssmallbutton: Turnon therelay2, terminalOUT2(A&B)outputs DC power.
Presssmallbutton again:Turn off the relay2,terminalOUT2nooutput.
Wehavelearned remotecontroltothe receiver. If you don’t wantthe receiver towork withtheremotecontrol, you can deleteallcodesofremote
controls,whichare stored inthe receiver.
Operation:Press andholdthe button of receiver untilsignalLEDflashesslowly; releasethe button,LEDkeeps slowflash.That meansallstored
codeshavebeen deleted successfully.
Learning the button ofremotecontrol:
1) Pressthe button of receiver;signalLEDonthe receiver keepsshining.Thereceiver enters intostatus ofLEARNING.
2) Press anyone buttonon remotecontrol.IfsignalLEDflashesquickly15 times and turnsoff,it means learning issuccessful.
3) Whenreceiver is inthestatus of LEARNING, pressagainthe button of receiver, signalLEDturns off, learning process will be discontinued.
4) The receiver can learn severalremotecontrols withdifferent codes.
Application Circuit
Button
SignalLED
PowerLED
Antenna
RFmodule
IC
Relay1
Relay2
Powersupply
_
+
A B C A B C
Lamp1
Lamp2
+
_
+
_
Jumper-2
Jumper-1
OUT1
OUT2