Casablanca Fellini User manual

www.CasablancaFanCo.com 1.888.227.2178
PAGE
7
PAGE
14
PAGE
10
PAGE
5
PAGE
6
30 inches
7 feet
PAGE
2
What to Expect with
Your Installation Ceiling Bracket
Ladder
PAGE
3
Tools Needed
Wiring Canopy
Maintenance
& Cleaning Troubleshooting
Downrod
Switch Housing
Preparation
PAGE
12
Table of Contents
?
?
PAGE
18
PAGE
17
Operation
PAGE
16
PAGE
4
Mounting Options
Congratulations on purchasing your new
Casablanca® ceiling fan! It will provide
comfort and performance in your home

and operation manual contains complete
instructions for installing and operating
your fan.
We are proud of our work and appreciate
the opportunity to supply you with the
best ceiling fan available anywhere in the
world.
To register your fan, please visit:
www.CasablancaFanCo.com/register
Save your receipt for proof of purchase.
1

?
?
?
Blades
PAGE
13

www.CasablancaFanCo.com 1.888.227.2178
www.CasablancaFanCo.com 1.888.227.2178
www.CasablancaFanCo.com 1.888.227.2178
What to Expect with Your Installation
Know your wiring
If you are unfamiliar
with wiring, use a

You may need a
friend to help you.
Check box to see
fan weight
Assess location
30 inches
from blade tip to
nearest wall or
obstruction 7 feet
from bottom
edge of blade

Select a downrod length


outlet box marked acceptable for fan support of 70 lbs (31.8 kg)
and use the mounting screws provided with the outlet box.

servicing your fan, disconnect the power by turning off the
circuit breakers to the outlet box and associated wall switch
location. If you cannot lock the circuit breakers in the off
position, securely fasten a prominent warning device, such as a
tag, to the service panel.
w.3 - 
use only Casablanca Solid State Speed Controls.

brackets when installing the blade brackets, balancing the blades,
or cleaning the fan. Do not insert foreign objects in between
rotating fan blades.
c.1 - All wiring must be in accordance with national and local


c.2 - Use only Casablanca replacement parts.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and if not
installed and used in accordance with the instructions may cause
harmful interference to radio communications.
Assess ceiling angle
Read and Save These Instructions

WARNINGS
CAUTIONS
Must be able to
secure the fan to
building structure or
fan-rated outlet box
1
2
3
Standard Downrod
for ceilings 8-10 feet high
Shorter Downrod
for fans installed close to ceiling
Longer Downrod
for ceilings 10 feet or higher
Ceiling angles greater

Angled Mounting Kit.

2

2

www.CasablancaFanCo.com 1.888.227.2178
3

Tools Needed

Power Drill
(optional)

(optional)
Screwdrivers
Pliers Wire Strippers
If mounting to a support structure, you will also need these tools.

www.CasablancaFanCo.com 1.888.227.2178
4

If you have an angled ceiling:
1. You will need a longer downrod (sold separately).
 will
also need an Angled Mounting Kit (sold separately).
Guide Touches
BOTH Ceiling & Wall
S
I
T
U
A
T
I
O
N
1
Guide Touches Wall
but NOT Ceiling
S
I
T
U
A
T
I
O
N
2
You need BOTH
a Longer
Downrod &
an Angled
Mounting Kit
You need ONLY
a Longer
Downrod
*most common

Hang your fan by a standard downrod (included).
Mounting Options
Support
Structure
Ceiling
Outlet Box
(required)
Angled
Mounting
Style
Standard
Mounting
Style
Support
Structure
Ceiling
Outlet Box
(required)
Use Standard Mounting
or 

Use Angled Mounting
to hang the fan from a
vaulted or angled ceiling.
4
34OCEILING
WALL
OPTION
1
Standard
Mounting
OPTION 2
Angled
Mounting
2 3

toward ceiling

against wall
1

on dotted line

Use the three steps below to determine if your ceiling angle is greater than 34°
1.888.227.2178


www.CasablancaFanCo.com 1.888.227.2178
1.888.227.2178
www.CasablancaFanCo.com
Ceiling Bracket
OFF
Make sure all four bumpers are
still attached.
For angled ceilings, point
opening toward peak.
Refer to warning w.1 on pg. 2

installing your fan, disconnect the power by
turning off the circuit breakers to the outlet
box associated with the wall switch location.
If you are unable to do this,
call Technical Support at
1-888-227-2178.
Use wood screws
(included) when securing
to support structure with
approved electrical outlet

in support structure to aid
in securing ceiling bracket
with hardware found in
the hardware bag.
Use machine screws
(provided with outlet
box) when securing to
existing ceiling fan-rated
outlet box. Make sure
it is securely installed
and is acceptable for fan
support of 31.8 kg (70 lbs)
or less.

5


www.CasablancaFanCo.com 1.888.227.2178
Ceiling Bracket (continued) Preparation 1.888.227.2178
www.CasablancaFanCo.com
D
I
S
C
A
R
D
K
E
E
P
!
Remove the shipping blocks from the
motor. Save the screws. They will be
needed for blade iron installation.
Note: Some fans will have a shipping
ring instead of shipping blocks. Please
remove the ring and save the screws.
Time Saver Tip: Get a helper
to insert grommets, found in
the hardware bag, into the
blades while you’re doing the
next couple of steps.
6


www.CasablancaFanCo.com 1.888.227.2178
Downrod
Slide
Slide
1 2 3 4 5
678910
Sold Separately
Included
Longer
Downrod
for angled
ceilings or
ceilings 10’ or
higher
Shorter
Downrod
for fans installed
close to ceiling
Standard
Downrod
for ceilings 8-10’ high
Option 1Option 2
Option 3
skip to next page
If you need a different downrod length follow these steps:
Steps 1-5 to remove standard downrod pipe
new pipe
Included (pre-assembled)
7


www.CasablancaFanCo.com 1.888.227.2178
KEEP!
8”
3/8”
C
U
T
&
S
T
R
I
P
(not to scale)
Remove the pre-installed
setscrew so that the downrod
can be inserted.
Hand tighten the downrod (at



from the top of the downrod.
Downrod (continued)
 

with pliers. DO NOT
HAND TIGHTEN.
If the setscrew is not tightened
securely, the fan may fall.
K
E
E
P
!
8


www.CasablancaFanCo.com 1.888.227.2178
9

Downrod (continued)
DO NOT PICK THE FAN UP BY THE
CANOPY OR WIRES. Place the downrod
ball into the slot in the ceiling bracket.
Put the wires and downrod through the canopy.


www.CasablancaFanCo.com 1.888.227.2178
Wiring
F
R
O
M
R
E
C
E
I
V
E
R
F
R
O
M
C
E
I
L
I
N
G
F
R
O
M
C
E
I
L
I
N
G
B
R
A
C
K
E
T
Using an orange wire
connector from
the hardware bag,
connect the three
grounding wires

stripe, or bare copper)
coming from the ceiling,
downrod, and hanging
bracket.
green/yellow stripe (grounding)
green/yellow stripe
green/yellow stripe
white black
blue
white (common out) black (fan out) blue (light out)

into the outlet box. Spread the wires apart, with the grounded wires on one side of
the outlet box and the ungrounded wires on the other side of the outlet box.
Note: 
hold the bare metal leads
together and place a wire
connector over them, then twist
clockwise until tight.
Using the blue wire
connectors from the remote
control hardware bag,
connect the white wire
from the receiver (marked

wire from fan. Connect the
black wire from the receiver

black wire from the fan.
Connect the blue wire from



the receiver will not be used,
it has a pre-installed wire
terminator.
F
R
O
M
F
A
N
F
R
O
M
F
A
N

F
R
O
M
R
E
C
E
I
V
E
R
Using an orange wire
connector from
the hardware bag,
connect the black wire
(ungrounded) from the
ceiling to the black wire
from the receiver (marked

white wire (grounded)
from the ceiling to
the white wire from
the receiver (marked


F
R
O
M
C
E
I
L
I
N
G
black (ungrounded) white (grounded) white (neutral in)
black (live in)
10


www.CasablancaFanCo.com 1.888.227.2178
11

Using orange wire connectors,
connect the two black wires
(ungrounded) from the outlet
box. Also connect the two green
or bare wires (grounding) from
the outlet box with the grounding
wire from the wall control.
After removing the switch plate
cover, remove all wiring from
the switch.
Insert the wall control into
the outlet box and secure the
two screws using a Phillips
head screwdriver.
Install the cover plate using a
Phillips Head screwdriver to
secure the two cover plate screws.
Wiring (continued)
Push all connections to the back of the switch box. Spread the
wires apart, with the grounded wires on one side of the switch box
and the ungrounded wires on the other side of the switch box.

the following conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
  
After After After After

www.CasablancaFanCo.com 1.888.227.2178
12

Canopy
Note: Fan style may vary.

the screw holes are aligned.
Position the canopy so that, when

the hanging bracket as shown.
Screw
Holes
Insert the two canopy screws
found in the hardware bag.

www.CasablancaFanCo.com 1.888.227.2178

Install the grommets, found in
the hardware bag, in the blades by hand.

face upward toward the blade iron. Place
each blade between a blade iron and
medallion. Install three blade screws, found in
the hardware bag, to attach the medallion
to the blade iron. Repeat for all blades.
Blades
Your blades are shielded with Dust Armor® which
is a nanotechnology coating that repels dust. For
cleaning the fan, use soft brushes or cloths to prevent

13
Remember the screws that
you kept after removing the


the hardware bag for this step.

motor with screws found in
the hardware bag, then securely
tighten after both screws are attached.

www.CasablancaFanCo.com 1.888.227.2178
Switch Housing
Make sure the upper switch housing is securely
attached to the mounting plate. Failure to properly
secure all 3 assembly screws could result in the switch

Feed the wire plug through the center
hole of the upper switch housing, then
wrap keyhole slots around the screws and
twist counterclockwise.
Screw two housing assembly screws
from the hardware bag halfway into
the motor housing. It does not matter
which two screw holes you choose.
Insert the third screw, found in
the hardware bag, into place and then
tighten all three screws.

14

www.CasablancaFanCo.com 1.888.227.2178
Switch Housing (continued)
Connect the plugs from the upper and
lower switch housings. Make sure to
line up the colored markings on the
connectors.

holes line up with the screw holes in the
upper switch housing. Install the three
switch housing screws, found in
the hardware bag.
Make sure the lower switch housing is securely attached to the
upper switch housing. Failure to properly secure all 3 assembly

CONGRATULATIONS!
YOU’RE DONE!

15

www.CasablancaFanCo.com 1.888.227.2178

16
Operation
Quickly press the up or down arrow
to turn the lights off and on. Hold
the up or down arrow to dim or

button changes the direction that

turns the fan off and on.


button and the fan power
button simultaneously for at

will turn at the lowest speed
signifying that the remote
pairing process is complete.
ON


Down
Fan
Speed
Reverse

Holder
Fan
Power

Up
Fan
Speed
Fan
Power


(High)
Once the power
is turned on, the
remote must be
paired within
three minutes.
Pairing is only
required once
after initial
installation.

press on the battery door to eject it.
Unscrew the battery holder. Insert the
battery, found in the control hardware
bag, with the positive (+) side facing
downward. Reinstall the battery
holder and reinsert the battery door
into the wall control.


Holder

Door

www.CasablancaFanCo.com 1.888.227.2178
Maintenance & Cleaning
ON

For cleaning the fan, use soft
brushes or cloths to prevent
scratching. Cleaning products



direction. In warm weather, use

In cold weather, use (b) upward

(a)
(b)
Reverse


the battery door to eject it. Remove
the battery using a small Phillip’s
head screwdriver. Replace with
same type battery, making sure
the (+) side is facing down. Replace
battery holder and battery door.


Door

17

www.CasablancaFanCo.com 1.888.227.2178
18

Troubleshooting
AUTHORIZED SERVICE CENTERS
For the most updated listing of Casablanca Authorized
Service Centers, visit www.CasablancaFanCo.com or
call toll free 1-888-227-2178.
Excessive wobbling
 
blade iron screws until they
are snug.
 
the fan carefully, and check
that the hanger ball is
properly seated.
 Use the provided balancing
kit and instructions to balance
the fan.
Noisy Operation
 
iron screws until they are snug.
 Check to see if any of the
blades are cracked. If so, replace
all of the blades.
Remote doesn’t work
 Install a fresh battery in the wall
control.
 Make sure you have paired the
remote.
Fan doesn’t work
 
 Check the circuit breaker to
ensure the power is turned on.
 Check the wall control battery.
 Make sure that you have paired
the wall control.
 Make sure the blades spin freely.
 
breaker, then loosen the canopy
and check all the connections
according to the wiring diagram
on page 10-11.
 Check the plug connection in
the switch housing.