Casablanca S3 User manual

WARNING: To reduce the possiblity of electrical shock, be sure that the power is turned off at its source(fuse
or circuit breaker). All electrical components must be installed in accordance with national and local
electrical codes. To reduce the risk of fire and electrical shock, use this light fixture only with UL Listed Casa-
blanca Stealth or S3 Ceiling Fans.
Step 1. Remove existing glass by gently pushing up on the
glass and rotate glass counter-clockwise until the glass tabs
from the fixture align with the indentations on the glass.
Step 2. Remove halogen light bulb from socket.
Step 3. Package up glass and bulb for safe keeping if you ever
decide to re-install.
Step 4. Install socket plug into the socket.
©2004 Casablanca Fan Co. www.CasablancaFanCo.com P/N8943620 BM0304
READ AND SAVE THESE INSTRUCTIONS
INSTRUCTIONS FOR MOUNTING THE NO LIGHT CAP
FOR AN EXISTING FAN
SOCKET PLUG
Step 5. Take the No Light Cap and position the indentations
in the outer rim of the cap so that they line up with the tabs
on the inside surface of the fixture rim
Step 6. Carefully push the cap up inside the light fixture as
far as it will go and rotate in a clockwise direction until it
falls into the notch for each tab.
Step 7. Turn power back on at the circuit breaker or fuse-
box.
This completes the installation of the No Light Cap.
NO LIGHT CAP
S3C-xx for S3 Fan or STLHC-xx for Stealth Fan

©2004 Casablanca Fan Co. www.CasablancaFanCo.com
FOR NEW FAN
Step 1. Follow instructions in your fan manual until you come
to “bulb Installation”.
Step 2. Install socket plug into socket.
Step 3. Take the No Light Cap and position the indentations
in the outer rim of the cap so that they line up with the tabs
on the inside surface of the fixture rim.
Step 4. Carefully push the cap up inside the light fixture as
far as it will go and rotate in a clockwise direction until it
falls into the notch for each tab.
This completes the installation of the No Light Cap.
S3
STEALTH