Casio Celviano AP-80R User manual

ELECTRONIC KEYBOARD
AP-80R
SEP. 2004
AP-80R
All manuals and user guides at all-guides.com
all-guides.com

CONTENTS
Specifications ---------------------------------------------------------------------------------------------- 1
Block Diagram --------------------------------------------------------------------------------------------- 3
Circuit Description --------------------------------------------------------------------------------------- 4
Printed Circuit Boards ---------------------------------------------------------------------------------- 6
Disassembly ---------------------------------------------------------------------------------------------- 10
Diagnostic Program------------------------------------------------------------------------------------ 17
Exploded View ------------------------------------------------------------------------------------------- 20
Parts List--------------------------------------------------------------------------------------------------- 22
Schematic Diagrams----------------------------------------------------------------------------------- 26
All manuals and user guides at all-guides.com

— 1 —
SPECIFICATIONS
GENERAL
Keyboard: 88 piano keys (with touch response)
Polyphony: 32 notes, maximum
Tones: 120 panel tones + 128 GM tones + 10 drum sets; with layer and split
Digital Effects: Reverb (4 types), Chorus (4 types)
Metronome:
Time Signatures: 0, 2, 3, 4, 5, 6
Tempo Range: 20 to 255
Auto Accompaniment:
Number of Rhythms: 120
Tempo Range: 20 to 255
Modes: Normal; CASIO CHORD; FINGERED; FULL RANGE CHORD
Accompaniment Volume: Adjustable
One Touch Presets: Optimal tone, tempo, layer/auto harmonize on/off settings to match rhythm
Auto Harmonize: 12 types; adds harmony notes to melody in accordance with auto accompaniment
chord fingerings.
Built-in Tunes:
Number of Tunes: Piano Group 50 + Song Group 30 + 10 loaded song data (Approximately 132 kilo-
bytes )
Tempo: 20 to 255
Demo: Sequential looping of all 80 preset tunes
Song Volume: Adjustable
Lesson Function: Lesson Part: Left hand, right hand
Song Memory:
Number of Songs: Two (1 Song Recording, 1 Free Recording)
Recorded Data: Song Recording: Right-hand part, left-hand part, both-hand parts
Free Recording: Track 1 (chord accompaniment), Track 2 (melody)
Recording Method: Real-time
Memory Capacity: Approximately 5,300 notes (two songs)
Pedals: Damper, Soft, Sostenuto
Registration Memory: Number of Memory Areas: 16 (4 sets × 4 banks)
Card Slot: 3.3V SmartMediaTM
Other Functions:
Touch: 3 types, off
Transpose: 1 octave (Fto C to F)
Tuning: A4 = 440.0Hz ±50 cents (adjustable)
Display Contrast: Adjustable
MIDI: 16 multi-timbre receive, GM Level 1 standard
All manuals and user guides at all-guides.com

— 2 —
Input/Output:
Headphones: Stereo standard jacks ×2
Output Impedance : 170Ω
Output Voltage : 1.1V (RMS) MAX
LINE OUT (R)(L/MONO): Standard jacks ×2
Output impedance: 2.3kΩ
Output voltage: 1.0V (RMS) MAX
MIC IN: Standard jack
Input impedance: 3.3kΩ
Input voltage: 10mV
MIDI (OUT) (IN)
USB port
Speakers: ø16 cm ×2 + ø5 cm ×2 (Output: 20W + 20W)
Power Supply: AP-80R: 120V
AP-80RV: 220-240V
Power Consumption: 60W
Dimensions:
Digital Piano (without stand): 138.0 ×47.6 ×24.4 cm (54 3/8×18 3/4×9 5/8inch)
Digital Piano: 138.1 ×47.7 ×84.6 cm (54 7/16 ×18 13/16 ×33 5/16 inch)
Weight:
Digital Piano (without stand): approximately 41.6 kg (91.7 lbs)
Digital Piano: Approximately 54.0 kg (119.0 lbs)
All manuals and user guides at all-guides.com

— 3 —
BLOCK DIAGRAM
Power AMP
LM4765
IC1 (PS1 PCB)
Filter
NJM2068DD
IC5 (PS1 PCB)
D/A Converter
UPD63200GS
IC4 (MAA1 PCB)
Filter
NJM2068DD
IC6,8 (PS1 PCB)
ROM(8MB)
MR27V6402GOLDTN08
IC9 (MAA1 PCB)
SMART MEDIA DRIVER
UPD65891GA-0129EUA
IC10 (MAA1 PCB)
Main Volume
Mute
BCK, SD0, LRCK
RXDITXDO
HEADPHONE
Keyboard
Button/LED Controller
UPD65881GK-1019ETA
IC601 (CNA1 PCB)
MPU
ML6763B-NNTC-116
IC7 (MAA1 PCB)
LED
Button
FI0~10
SI0~10
KC0~7
MA1~22
MD0~15
RAM(128K×16 Static RAM)
CY62136DV30LL55ZIT
IC11 (MAA1 PCB)
MA1~17
MD0~15
SPSP
RESET
MA1,MA21~23
MD7~15
MWEB,MRDB
DB4~7
CONT,RS,RW,E MIDI
IN
OUT
MOUT
MIN
SOFT,SOSTENUTO,DAMPER
VBUS,-D,+D
VA5(5V)
VA15(15V)
Power Supply
IC2~4,Q7,8,D13,14,17,
18,21~24 (PS1 PCB)
LR
LINE OUT
PEDAL
USB
L
R
MIC
MIC VR
Filter
NJM2068DD
IC9
(PS1 PCB)
VD3(3V)
RESET
IC1, Q1
(MAA1 PCB)
COM1 ~ COM16
SEG1 ~ SEG120
LCD
LCD Controller
IC1:ML9040-B02GA
IC2:MSM5259GS-K
IC3:MSM5259GS-K
(LCA1 PCB)
All manuals and user guides at all-guides.com

— 4 —
CIRCUIT DESCRIPTION
KEY MATRIX
NOMENCLATURE OF KEYS
F#3G#3A#3 C#4D#4 F#4G#4A#4 C#5D#5 F#5G#5A#5
F3 G3 A3 B3 C4 D4 E4 F4 G4 A4 B4 C5 D5 E5 F5 G5 A5 B5 C6
D#3
C2 D2 E2 F2 G2 A2 B2 C3 D3 E3 B6A6G6F6E6D6 C7
C#3A#2G#2F#2D#2C#2
C1 D1 E1 F1 G1 A1 B1A0 B0
A#1A#0 G#1F#1D#1C#1 A#6G#6F#6D#6C#6
B7A7G7F7E7D7 C8
A#7G#7F#7D#7
C#7
KC0 KC1 KC2 KC3 KC4 KC5 KC6 KC7
FI0 A01A0#1B01C11C1#1D11D1#1E11
SI0 A02A0#2B02C12C1#2D12D1#2E12
FI1 F11F1#1G11G1#1A11A1#1B11C21
SI1 F12F1#2G12G1#2A12A1#2B12C22
FI2 C2#1D21D2#1E21F21F2#1G21G2#1
SI2 C2#2D22D2#2E22F22F2#2G22G2#2
FI3 A21A2#1B21C31C3#1D31D3#1E31
SI3 A22A2#2B22C32C3#2D32D3#2E32
FI4 F31F3#1G31G3#1A31A3#1B31C41
SI4 F32F3#2G32G3#2A32A3#2B32C42
FI5 C4#1D41D4#1E41F41F4#1G41G4#1
SI5 C4#2D42D4#2E42F42F4#2G42G4#2
FI6 A41A4#1B41C51C5#1D51D5#1E51
SI6 A42A4#2B42C52C5#2D52D5#2E52
FI7 F51F5#1G51G5#1A51A5#1B51C61
SI7 F52F5#2G52G5#2A52A5#2B52C62
FI8 C6#1D61D6#1E61F61F6#1G61G6#1
SI8 C6#2D62D6#2E62F62F6#2G62G6#2
FI9 A61A6#1B61C71C7#1D71D7#1E71
SI9 A62A6#2B62C72C7#2D72D7#2E72
FI10 F71F7#1G71G7#1A71A7#1B71C81
SI10 F72F7#2G72G7#2A72A7#2B72C82
All manuals and user guides at all-guides.com
all-guides.com

—5 —
BUTTON MATRIX
KEY LED MATRIX
PLAY/
STOP
EUROPEAN
START/
STOP
ONE
TOUCH
PRESET
TEMPO ∆
PIPE
BASS
MODE
LATIN
VARIOUS
FOR
PIANO
TEMPO ∇
SYNTH-
LEAD
STRINGS
TRANSPOSE/
KEY
CONTROL ∇
ROCK
VARIATION/
FILL-IN
SONG
MEMORY
TRACK
BANK
(REGISTRATION)
ORGAN
TRANSPOSE/
KEY
CONTROL ∆
JAZZ
SYNCHRO/
ENDING
METRONOME
AUTO
HARMONIZE
1
(REGISTRATION)
GUITAR
SING
ALONG
POPS
INTRO
CARD
SONG/USER
(MUSIC
LIBRARY)
ECHO
DANCE/
FUNK
NOMAL/
FILL-IN
ACCOMP/
SONG
VOLUME
PIANO
(MUSIC
LIBRARY)
E.PIANO
REVERB/
CHORUS
SPLIT
4
(REGISTRATION)
2
(REGISTRATION)
SYNTH-
PAD
BRASS
SETTING
LAYER
STORE
(REGISTRATION)
3
(REGISTRATION)
GM TONES
REED
SC0
SC1
SC2
SC3
SC4
SC5
SC6
SI0 SI1 SI2 SI3 SI4 SI5 SI6 SI7
TEMPO 2
TEMPO 3
TEMPO 4
VARIOUS
LATIN
EUROPEAN
SING
ALONG
ECHO
POPS
FINGERED
FULL
RANGE
CHORD
CASIO
CHORD
TEMPO 1
TRACK 1/L
TRACK 2/R
START/
STOP
PLAY/
STOP
REPERT
LL0
LL1
LL2
LH25 LH24 LH23 LH22 LH21 LH20 LH19 LH18
JAZZ
ROCK
DANCE/
FUNK
FOR
PIANO
SONG
MEMORY
AUTO
HARMONIZE
LAYER
SPLIT
PIANO
STRINGS
BASS
GUITAR
PIANO
(MUSIC
LIBRARY)
CARD
E.PIANO
ORGAN
REVERB
CHORUS
LL0
LL1
LL2
LH17 LH14 LH13 LH12 LH11 LH10 LH9
BRASS
REED
PIPE
GM TONES
SYNTH-
PAD
SYNTH-
LEAD
SONG/USER
(MUSIC
LIBRARY)
PIANO
All manuals and user guides at all-guides.com

— 6 —
PRINTED CIRCUIT BOARDS
MAIN PCB M419-MAA1
All manuals and user guides at all-guides.com

— 7 —
SUB PCB M429-PS1
JACK PCB M429-PSA3JACK PCB M429-PSA2 POWER LED PCB M429-PSA4
All manuals and user guides at all-guides.com

— 8 —
CONSOLE PCB M429-CNA1
CONSOLE PCB M429-CNA2 CONSOLE PCB M429-CNA5
CONSOLE PCB M429-CNA3 CONSOLE PCB M429-CNA4
POWER SUPPLY PCB M420-ACA1 LED PCB M419-LCA1
LED PCB M419-LCB2
I/O PCB M429-SMA1
All manuals and user guides at all-guides.com

— 9 —
KEY PCB MCPK-KYA1/KYB2/KYA3
All manuals and user guides at all-guides.com
all-guides.com

— 10 —
DISASSEMBLY
1. Remove eight screws on the back of the main unit, and then remove the top board .
2. Remove one screw and the key cover.
3. Remove six screws and the wire netting.
All manuals and user guides at all-guides.com

— 11 —
Connector (CN16)
Connector (CN17)
Power switch
Connector (CN18)
Connector (CN20)
Connector (CN19)
Connector (CN3)
Connector (CN2) Connector (CN1)
Connector (CN4)
Connector (CN1)
Connector (CN2)
Connector (CN3)
Connector (CN8)
Connector (CN12)
Connector (CN13)
■To remove the main PCB (M419-MAA1)
4. Remove six connectors on the main PCB.
5. Remove eight screws and the main PCB.
■To remove the panel part
6. Remove two connectors and six screws.
■To remove the sub PCB (M429-PS1), power PCB (M420-ACA1) and the transformer
9. Remove seven connectors.
10. Remove 14 screws, sub PCB (M429-PS1), power PCB (M420-ACA1) and the transformer.
7. Remove the panel part from the main unit.
8. Remove two screws in the power switch, and then remove the panel part.
All manuals and user guides at all-guides.com

— 12 —
Connector (CN10)
■To remove the jack PCB (M429-PS2) and the jack PCB (M429-PS3)
11. Remove the Insulok tie.
12. Remove three screws and the jack PCB (M429-PS2).
Note: Arrange the cables using the Insulok tie when assembling.
13. Remove the Insulok tie.
14. Remove one connector, two screws and the jack PCB (M429-PS3).
Note: Arrange the cables using the Insulok tie when assembling.
■To remove the speaker (only on the right side)
15.Remove six screws and two speakers.
All manuals and user guides at all-guides.com

— 13 —
15.0 ± 0.5 mm
SOLDER SIDE
COMPONENT SIDE
8.0 ±0.5mm 12.5±0.5mm SOLDER SIDE
COMPONENT SIDE
M429-CN1 PCB M429-CN2 PCB
M429-CN3 PCB
M429-CN4 PCB M429-CN5 PCB
■To remove the console PCB (M429-CN PCB ASSY)
16. Remove 22 screws of the M429-CN1 PCB.
17. Remove 27 screws of the M429-CN2 PCB.
18. Remove the volume knob of the M429-CN2 PCB.
■To remove the console PCB (M429-CN PCB ASSY)
19. Remove four screws of the M429-CN3 PCB.
20. Remove three screws of the M429-CN4 PCB.
21. Remove the volume knob of the M429-CN4 PCB.
22. Remove three screws of the M429-CN5 PCB.
23. Remove the volume knob of the M429-CN5 PCB.
24. Remove one connector and the M429-CN PCB ASSY.
Note: How to fix the LED
All manuals and user guides at all-guides.com

— 14 —
A
7
3
B
8
2
4
6
0
159
Insulok tie
■To remove the smart media (M429-SMA1) and the LCD PCB (M419-LCA1)
25. Remove four screws of the M429-SMA1 PCB.
26. Remove 16 screws and the LCD unit.
Note: Fix the screws in the right order when assembling.
Precautions during assembly
Arrange the cables around the panel part.
All manuals and user guides at all-guides.com
all-guides.com

— 15 —
■To remove the POWER LED PCB (M429-PSA4)
27. Remove seven screws on the bottom.
28. Remove two screws and the M429-PSA4 PCB.
■To remove the keyboard
29. Remove 16 screws on the bottom.
30. Remove three screws on the surface.
31. Separate the case and the keyboard.
All manuals and user guides at all-guides.com

— 16 —
1
2
a
7 pin 4 pin
1
22
8 pin 3 pin
34. Remove eight rubber keys.
35. Remove 32 screws and the key PCB.
* Precautions when assembling the rubber keys
1 The length of this one key is different.
2 The number of pins on the upper side is different from that on the lower side.
3 Fix the pins tightly.
32. 1 Pull the hammer, and 2 Aremove the key from the hammer.
33. Insert the edge of the tweezers as shown in “a” part of the figure, and then remove the keys.
All manuals and user guides at all-guides.com

— 17 —
DIAGNOSTIC PROGRAM
■Initial Setting
1. Connect the AC adaptor.
2. Connect the Pedal.
3. “Main” volume: MAX
4. “Mic” volume: MAX
■How to start diagnostic program
1. Press and hold “EXECUTE” button.
2. “POWER” switch  “ON”
3. Release “EXECUTE” button.
■Diagnostic program Message on LCD
1. RAM check
1Press “PIANO” button. AOK
2. ROM check
1Press “E.PIANO/CHROMATIC” button. OOK
3. SWITCH check
1Press “ORGAN” button. CCH
2Press the buttons in the following order. SWITCH No.
* The Switch number appears on the LCD.
* The button numbers are written in hexadecimal numerals.
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E
0F 10 11 12 18 19 1A 1B 1C 1D
1E
1F
20 21 22
CCH
23 24 25 26 27 28 29 2A 2B
2C 2D 2E 2F 30 31 32 33 34 COK
13 14 15 16 17
All manuals and user guides at all-guides.com

— 18 —
Message on LCD
4. DIAL check
1Press “GUITAR”button. ROT
2DIAL  “Turn right”2 digits number
* Increase the number on Display.
5. Pedal check (If there is no Pedal, this check can be skipped)
1Press the “STRINGS/ENSEMBLE”button. TCH
2Press the “DAMPER”pedal. DUM
* Sound C4 beep.
2Press the “SOSTENUTO”pedal. SOS
* Sound E4 beep.
3Press the “SOFT”pedal. SOF
* Sound G4 beep.
6. TUNING check
1Connect the Tuning Meter. (LINE OUT L)
2Press “PIPE”button.
* Sound A4 sin wave sound.
* The Tuning meter indicate “A4 ±2¢”.
3Press “GM TONES”button.
* Stop sound.
4Disconnect the Tuning Meter.
7. MIDI check
1Connect the MIDI Cable. (MIDI IN/OUT)
2Press “POPS”button. DOK
* Sound C4, E4 and G4 polyphonic beep.
3Disconnect the MIDI Cable.
8. USB check
1Connect the USB Cable. (To a PC that USB driver installed)
2Press “DANCE/FUNC”button. ACT
* Sound C4, E4 and G4 polyphonic beep.
3Disconnect the USB Cable.
9. HEAD PHONE check
1Press “ROCK”button.
2Connect the Head phone “A”. HOK
3Disconnect the Head phone “A”.
4Connect the Head phone “B”. HOK
5Disconnect the Head phone “B”.
All manuals and user guides at all-guides.com