Casio PV-750 Plus Instruction and safety manual

58
Chapter
4Memo
The Memo Mode works much like a basic word processor. It lets you input and
store text files for later recall when you need them.
Entering the Memo Mode
Tap the Memo icon below the PV Unit screen to enter the Memo Mode.
You can also enter the Memo Mode by tapping Menu to display the Mode Menu,
and then selecting Memo.
1
23
• This is the Memo list screen, which appears first when you enter the Memo
Mode.
• The display category is the one that was selected when you last exited the
Memo Mode.
Changing the Display Category
1. Display the Memo list screen.
• Note that you can change the display category only from the Memo list
screen.
2. Tap the Larrow to the right of the category name box to open a list of
categories, and tap the one you want to select.
• The Memo Mode list changes to show all memos stored under the
category you select.
• All Memo Mode categories are initially named Untitled (1 through 5).
See “Renaming Memo Categories” on page 62 for details on changing
Memo Mode category names.
1Category name box
2Memo titles
3Scroll bar

59
Chapter 4 Memo
Inputting New Memo Data
Data input procedures are the same for all categories.
1. While a Memo Mode list or data screen is on the display, tap the New
button.
2. Tap the category where you want to input the data.
• In this example, tap Business.
1
2
3
4
3. Input the text of the memo. The first line appears in the Memo list screen,
so it is a good idea to input a descriptive title in the first line for later
reference.
1Prompt
2Data input tool bar
3Category name
4Text keyboard
4

60
4. After you finish inputting all the data that you want, tap Save to store it.
Viewing Memo Data
The following procedures explain how to recall a memo item (record) for viewing,
and how to expand the data display to fill the entire screen.
To view memo data
1. Display the Memo list screen.
• Note that you can change the display category only from the Memo list
screen.
2. Tap the Larrow to the right of the category name box to open a list of
categories, and tap the one that contains the data you want to view.
Memo titles

61
Chapter 4 Memo
3. Rotate the Action control up or down to select the title of the memo you
want to view, and then press the Action control to display its contents.
To display an item in the full-screen view
1. Select the memo whose contents you want to display in the full-screen
view.
• You can select a memo by highlighting it in the list screen or by displaying
its data screen.
2. Tap the Menu Bar icon to display the menu bar, and then tap Option –
Full screen.
• You can use the Action control to scroll the screen contents up and
down.
• Tap Esc to return to the normal view.

62
Moving a Memo within a List Screen
Use the following procedure when you want to move a memo to different location
within the list screen of the same category.
• You can’t move a memo from one category to another.
1. Display the list screen that contains the memo you want to move, and
tap the memo title to highlight it.
2. Tap the Menu Bar icon to display the menu bar, and then tap Option –
Move.
3. Tap the memo above which you want to move the memo you selected in
step 1.
4. Tap Exe to move the memo.
Renaming Memo Categories
Use the following procedure to change the name of a Memo category.
1. In the Memo Mode, display the list screen for the category whose name
you want to change.
2. Tap the Menu Bar icon to display the menu bar, and then tap Option –
Name edit.
3. Type in the name you want to assign to the category, and then tap Save
to save it.
• You can use up to 14 characters for a category name.
• Category names revert to their preset defaults whenever the PV Unit is
reset.