Catalano Zero+ 40 User manual

Technical Overview
Dimensions are approximate. Information in this technical overview is representative of the product available at the time of printing.
Duetoour policy of continuous product development, the design and speciications depicted are subject to change without notice.
Pleaseconirm allparticulars with your sales consultant prior to purchase.
Zero+
Please note
• Secure basin with appropriate ixing method for the installation.
• This is only an installation guide. Rogerseller recommends having the product
on-site before commencing rough in.
• Apply an acetic cured silicone sealant between basin and adjacent surface.
Zero+ 40 Round Benchmount
Basin
3113003603 — White
130
340
200
105
400

rogerseller.com.au
Specifications
Installation to be carried out by the relevant licenced tradesperson. Allinstallations should comply with the
relevant requirements of AS/NZS 3500 and local plumbing codes.
Care and Maintenance
[1] Product should be inspected for surface damage prior to installation. [2] Cleaning and handling of all finishes
must be performed carefully. [3] Clean products using a soft cloth with warm soapy water only. [4] Never use
harsh detergents or abrasive cleaners as these will damage the product. [5] Water marks can be removed from
Matt Finishes with an application of a carnauba wax based non-abrasive polish on a microfibre cloth. [6] Do not
use undue pressure when cleaning and wipe in one direction only. [7] Contact with harsh chemicals such as hair
dye, hair bleach etc with result in damage to the finish. [8] Tapware should never be installed using acetone
silicones. [9] Avoid the use of wax based furniture creams as this can result in a build up of deposits which will
detract from the appearance. [10] Rose Copper: A protective lacquer has been applied to this finish. This is
required to maintain the stability of this finish and will be damaged if the above care and cleaning instructions
are not followed. [11] Damage to finishes arising from improper installation or post installation use or failure to
observe the above care and cleaning instructions will void all warranty agreements.
Warranty
Rogerseller tapware, bathroom fittings and sanitaryware are covered by a five (5) year warranty from date
ofpurchase. Forfullterms and conditions please refer to rogerseller.com.au
Rogerseller Showrooms —
Melbourne
173177 Barkly Avenue
Burnley VIC 3121
P 03 9429 8888
Sydney
18 Danks Street
Waterloo NSW 2017
P 02 8396 8700
Brisbane
7476 McLachlan Street
Fortitude Valley QLD 4006
P 07 3251 4333
Concept Stores —
Southern Innovations
(Fishwick ACT)
P 02 6143 2666
Southern Innovations
(Mitchell ACT)
P 02 6129 7666
Southern Innovations
(Albury NSW)
P 02 6022 2777
Routleys Plumbing Innovations
(Malvern SA)
P 08 8291 3000