Cateye VELO Wireless+ CC-VT235W User manual

2
3
4
1
Appendix
SET
CATEYE
VELO WIRELESS+
CYCLOCOMPUTER
CC-VT235W
1
•Thisinstructionmanualissubjecttochange
withoutnotice.Seeourwebsiteforthelatest
instructionmanual(PDF).
•Pleasevisitourwebsite,whereadetailed
QuickStartmanualcontainingvideoscanbe
downloaded.
http://www.cateye.com/products/detail/CC-VT235W/manual/
Setting up the
computer
Mounting the
computer
Starting
measurement
Changing settings
Warning/Caution
Product Warranty, etc.

2
3
4
Appendix
SET
1
2
Mounting the computer
1 Mount the bracket
•Whenmountingonstem
•Whenmountingonhandlebar
When mounting the bracket on a handlebar,
adjust the angle of the bracket so that
the back of the computer faces the speed
sensor when the computer is attached.
Stem
Handlebar
Nylontie
Nylontie
Bracket
Bracket
Correct Wrong
Doublesidedtape
Doublesidedtape
Bracket Doublesidedtape
Speedsensor Sensorrubberpad Nylontie
(x4)
Magnet
Cut
Cut
Pulltight
Pulltight

2
3
4
Appendix
SET
1
3
SENSOR ZONE
SENSOR ZONE
Max.
70 cm
(27”)
Mounting the computer
2 Mount the speed sensor
Mount the speed sensor in a posi-
tion where the distance from the
computer to the speed sensor is
within the signal range.
3 Mount the magnet
Speedsensor
CutSensorrubberpad
Nylontie
Pulltight
•Mountingonleftfrontfork
•Mountingonrightfrontfork
To sensor zone
Spoke
Magnet

2
3
4
Appendix
SET
1
4
SENSOR ZONE
SENSOR ZONE
5 mm
Mounting the computer
5 Attach/detach computer
6 Test operation
Afterattachingthecomputer,rotatethefrontwheelgentlytocheckthatcurrent
speedisdisplayedonthecomputer.
Ifthespeedisnotdisplayed,refertotheattachmentconditionsinsteps1,2,and4
again.
4 Adjust the speed sensor and the magnet
The magnet passes through
the speed sensor zone.
The clearance between the
speed sensor and the magnet
is within 5 mm (3/16”).
*Themagnetmaybemountedatanypositiononspokeaslongasattachment
conditionsaresatised.
Holdcomputer.
Pushoutsothatfrontliftsup.
Click
Magnet
Sensor zone
Speedsensor
(3/16”)
Speed
sensor
Magnet

3
4
1
Appendix
SET
2
 When using the computer for the first time or resetting it to its factory
default settings, clear all computer data following the procedure below.
5
AC
MODE
MENU
MODE
MODE
AC
Batterycase
cover Shortpress
Longpress
(2sec.)
1 Clear all data.
PresstheACbuttononthebackofthecomputer.
*Alldataisdeletedandthecomputerisreset
toitsfactorydefaultsettings.
2 Select the measurement unit.
Select“km/h”or“mph”.
3 Select the tire size.
Simple setting:
WhenMODEispressed,26”→700C→
27”→27.5”→29”→205[]→16”→18”→
20”→22”→24”and26”willappear,inthis
order.
Selectthetiresize(inch)ofyourbicycle.
Advanced settings
(For more accurate measurement):
Display205[]onthescreen,andpressand
holdMODEtoenterthetiresizeofyourbicycle
incm.PressingMODEchangesthevalue,and
pressingandholdingMODEmovestothenext
digit.
*Fordetailsonthetirecircumference,see
“Tirecircumference”(page7).
MODE
MENU
MENU
MENU
MODE
MODE
MODE
Setting up the computer
km/h↔mph
Conrm
Switchsize
Increase
numbers
Movetonext
digit
(Pressandhold)
Conrm
Conrm
Inch
L = 100 – 299 cm

2
3
4
1
Appendix
SET
2
6
4 Set the clock.
EachtimetheMODEbuttonispressedand
held,settingsswitchfromtimedisplaymode,
tohours,tominutes.
*When12hisselected,A(AM)orP(PM)is
displayedatthetopofthescreen.
5 Press MENU to complete setup.
Setupiscompletedandthecomputerswitches
tothemeasurementscreen.Forinstructions
onhowtostartmeasurement,referto“Starting
measurement”(page8).
MODE
MENU
MODE
Setupcomplete
Switchitem
orincrease
numbers
Switchscreen
ormoveto
nextdigit
(Pressand
hold)
Setting up the computer
Timedisplaymode(24hor12h)
MinutesHours

3
4
1
Appendix
SET
2
7
Tire circumference
Tirecircumferencecanbedeterminedbyeitherofthefollowingtwomethods:
•Measuretheactualtirecircumference(L)
Afterensuringthatthetirepressureisappropriate,sitonyour
bike,rollitforwardsothatthetiremakesonefullrevolution(use
thevalveorothermarkingasareference),andmeasurethedis-
tancetraveledontheroad.
•Tiresizechart
*ThetiresizeorETRTOcodeisindicatedonthesideofthetire.
ETRTO Tire size L (cm)
40-254 14x1.50 102
47-254 14x1.75 110
40-305 16x1.50 119
47-305 16x1.75 120
54-305 16x2.00 125
28-349 16x1-1/8 129
37-349 16x1-3/8 130
32-369 17x1-1/4(369) 134
40-355 18x1.50 134
47-355 18x1.75 135
32-406 20x1.25 145
35-406 20x1.35 146
40-406 20x1.50 149
47-406 20x1.75 152
50-406 20x1.95 157
28-451 20x1-1/8 155
37-451 20x1-3/8 162
37-501 22x1-3/8 177
40-501 22x1-1/2 179
47-507 24x1.75 189
50-507 24x2.00 193
54-507 24x2.125 197
25-520 24x1(520) 175
24x3/4Tubular 179
28-540 24x1-1/8 180
32-540 24x1-1/4 191
25-559 26x1(559) 191
32-559 26x1.25 195
37-559 26x1.40 201
40-559 26x1.50 201
47-559 26x1.75 202
50-559 26x1.95 205
54-559 26x2.10 207
57-559 26x2.125 207
58-559 26x2.35 208
75-559 26x3.00 217
ETRTO Tire size L (cm)
28-590 26x1-1/8 197
37-590 26x1-3/8 207
37-584 26x1-1/2 210
650CTubular26x7/8 192
20-571 650x20C 194
23-571
650x23C 194
25-571 650x25C26x1(571) 195
40-590 650x38A 213
40-584 650x38B 211
25-630 27x1(630) 215
28-630 27x1-1/8 216
32-630 27x1-1/4 216
37-630 27x1-3/8 217
40-584 27.5x1.50 208
50-584 27.5x1.95 209
54-584 27.5x2.1 215
57-584 27.5x2.25 218
18-622 700x18C 207
19-622 700x19C 208
20-622 700x20C 209
23-622 700x23C 210
25-622 700x25C 211
28-622 700x28C 214
30-622 700x30C 215
32-622 700x32C 216
700CTubular 213
35-622 700x35C 217
38-622 700x38C 218
40-622 700x40C 220
42-622 700x42C 222
44-622 700x44C 224
45-622 700x45C 224
47-622 700x47C 227
54-622 29x2.1 229
56-622 29x2.2 230
60-622 29x2.3 233
Setting up the computer
L cm

2
3
4
1
Appendix
SET
3
8
Sensor signal icon
Flashesinsyncwithasensorsignal.
Pace arrow
Indicateswhetherthecurrent
speedisfaster( )orslower( )
thantheaveragespeed.
Night mode icon
Thisturnsonwhennightmodeis
enabled.Fordetails,see“Backlight
(nightmode)”(page9).
MENU
Switching current function
PressingMODEswitchesthecurrentfunctiondisplayedatthebottomofthescreen.
Starting measurement
Onthemeasurementscreen,
pressMENUtogotothe
menuscreen.Varioussettings
canbechangedonthemenu
screen.
[Measurement screen]
MODE MODE
MODE
MODE
MODE
MODE
MODE
*1: Av(AverageSpeed)displays.EinsteadofthemeasurementvaluewhenTm(ElapsedTime)exceeds
approximately27hoursorDst(TripDistance)exceeds999.99km.Resetthemeasurementdata.
*2: Calorieconsumptionisacumulativevaluebasedonspeedcalculatedatonesecondintervals.
Valuesforcalorieconsumptionperhourareshownbelow.
Usethevaluesinthischartasareference.
Speed 10km/h[mph] 20km/h[mph] 30km/h[mph]
Kcal per hour 67.3kcal[155.2kcal] 244.5kcal[768.2kcal] 641.6kcal[2297.2kcal]
Current speed
0.0(4.0)–105.9km/h
[0.0(3.0)–65.9mph]
Measurement unit
Current function
Average Speed (*1)
0.0–105.9km/h
[0.0–65.9mph]
Maximum Speed
0.0(4.0)–105.9km/h
[0.0(3.0)–65.9mph]
Elapsed Time
0:00’00”–9:59’59”
Trip Distance
0.00–999.99km[mile]
Total distance
0–99999km[mile]
Calorie Consumption (*2)
0–99999kcal
Clock
0:00–23:59or
1:00–12:59

2
3
4
1
Appendix
SET
3
9
(Pressandhold)
Backlightoff Backlighton
(*1)
Buttonfunctions
enabled(*2)
MODE
Starting/stopping measurement
Measurementstartsautomaticallywhenthe
bicyclemoves.
Duringmeasurementthemeasurementunit
(km/hormph)ashes.
Resetting data
PressingandholdingtheMODEbuttonwhenonthemeasurement
screenresetsallmeasurementdatato0(excludingOdo).
Power-saving function
Ifthecomputerdoesnotreceive
anysignalfor10minutes,the
power-savingscreenisactivated
andonlytheclockisdisplayed.
IfMODEispressedorasensor
signalisreceivedwhilethepow-
ersavingscreenisactivated,the
computerreturnstothemeasure-
mentscreen.
*Ifthecomputerisleftonthe
power-savingscreenfor1hour,
SLEEPisdisplayed.Whenthe
computerisinthisstate,youcan
returntothemeasurementscreen
bypressingtheMODEbutton.
Starting measurement [Measurement screen]
MODE
or MENU
MODE
or MENU
MODE
Backlight (night mode)
Whennightmodeisenabled,the
backlightturnsonfor5seconds
whenthebuttonispressed.Back-
lightoperationcanbeextendedby
pressingthebuttonagain.
Fordetailsonthesettingmethod,
see“Nightmode”(page10).
*Whentheremainingbattery
chargeislow(when turnson),
thebacklightwillnotturnon.
*1: Whenyoupressthebuttonatthespeciedtime,the
backlightturnson,andtheactualfunctionofthebutton
isnotperformed.
*2: Ifyoupressthebuttonwhenthebacklightison,the
functionofthebuttonwillbeperformed.
Measurement
starts
Measurement
stops
1hour
10minutes
Sleep
Power-saving
screen
Measurement
screen

2
3
4
1
Appendix
SET
SET
4
10
Changing settings
Night mode
Youcansetthebacklighton/offandsetthe
timethatthebacklightturnsonfor.
Whenthedisplayformatis12h
MODE
Increase
numbers
MODE
Increase
numbers
Measurement
screen Menuscreen Description
Onthemeasurementscreen,pressMENUtogotothemenuscreen.
Varioussettingscanbechangedonthemenuscreen.
*Afterchangingsettings,alwayspressMENUtoconrmchanges.
*Whenthemenuscreenisleftonfor1minute,thecomputerreturnstothemeasurementscreen.
ON ↔ OFF
MODE
Whenthedisplayformatis24h
MODE
Increase
numbers
MODE
Increase
numbers
ON ↔ OFF
MODE
[Menu screen]
MENU
MENU
MODE
(Pressandhold)
Change
setting
MENU
Confirm
MODE
MODE
MODE
MODE
MODE
“Start Time” setting
“End Time” setting
MODE
(Press
andhold)
MODE
(Press
andhold)
MODE
(Press
andhold)
MODE
(Press
andhold)
MODE
(Press
andhold)
“Start Time” setting
“End Time” setting
MODE
(Press
andhold)
P(PM)
A(AM)