CE-Link WPC25-3TCNA User manual

Wireless Charger
WPC25-3TCNA
User Manual
CONTENTS
1.0 PRODUC INTRODUCTION ------------------------------------------1
2.0 FEATURES ----------------------------------------------------------1
3.0 SPECIFICATIONS --------------------------------------------------1
4.0 PACKING LIST ------------------------------------------------------2
5.0 OPERATION GUIDANCE--------------------------------------------2
6.0 CONNECTION DIAGRAM -------------------------------------------3

Wireless Charger
1
Wireless Charger
DEAR CUSTOMER
Thank you for purchasing this product. For optimum performance and
safety, please read these instructions carefully before using this
product. Please keep this manual for reference in the future.
1.0 INTRODUCTION
This product is a wireless charging device in accordance with the QI
protocol which is suitable for mobile phones, and other devices based
on wireless charging 5W, 7.5W or 15w. Connect the wireless charger
to a power supply and then you can charge your device which is
supported wireless charging (mobile phones, etc) by put it on the
wireless charger directly.
2.0 FEATURES
Transmitting terminal input: 15V/3A, 12V/3A
Transmitting terminal output1(magsafe): 5W/7.5W/15W
Transmitting terminal output2: 5W
Transmitting terminal output3(Apple Wacth): 5W
Compliant with CE, FCC standards
It is light, smart and convenient to use
Compatibility:
output1:iPhone12,iPhone12min,iPhone12Pro,iPhone12 ProMax
Output2: wireless Airpods
Output3: Apple Wacth
3.0 SPECIFICATIONS
Input
Type-C: 15V/3A, 12V/3A, (PD adapter)
Output
15W+5W+5W Max
Wireless Charging Frequency
127.7KHz/110-205KHZ
Operating Temperature Range
0~30°C
Storage Temperature Range
-20 ~ 40°C
Operation Humidity
10% ~ 80% RH
Storage Humidity
5% ~ 95% RH
Size
199*90.8*128.8±0.5mm
Weight
650±10g

Wireless Charger
2
4.0 PACKING LIST
Before using this product, please check the packing and make sure
the following items are contained in the packing:
Main unit×1
User Manual×1
5.0 OPERATION GUIDANCE
Operation Procedures
1. Connect the wireless charger to the power supply and the blue
light will be on during standby.
2. Place your device (which supports wireless charging) on the
wireless charger
3. When finished charging, the blue light will stop breathing.
4. Please take out the device after it is fully charged.
Operation Notes
1. For optimum performance, please use the wireless charger
according to this user manual.
2. Please connect the wireless charger to the power adapter. When
you need 15W+5W+5W wireless output, the output capacity of
your adapter should include 15V3A/12V3A.It is compatible with
PD adapters.
3. Please unplug the wireless charger after using.
4. Do not use the wireless charger with an electronic product which is
not in conformity with the specifications, so as to avoid any
problem caused by specification mismatching.
5. It’s normal that wireless charger will be a little overheated in the
use process.
6. When the wireless charger stops working under some accidents,
you need to check whether the device is compatible with this
wireless charger.
7. Do not let the wireless charger close to fire, such as stove, candles
and etc.
8. Do not let the wireless charger soak into liquid, such as swimming
pool, bathtub, etc.
9. Do not wash the wireless charger with corrosive cleaner.
10.If the wireless charger does not work, please contact the local
merchandise or dealer.
11. Do not place metal objects on the back of the phone while it is
charging wirelessly.

Wireless Charger
3
6.0 CONNECTION DIAGRAM
FCC Warning
This device complies with part 18 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Note: If any change or modification of the equipment is not explicitly
approved by the party responsible for compliance, the user shall have no
right to operate the charger; otherwise the user shall be liable for the
consequences.
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with a minimum distance of 20 centimeters between the radiator and your
body.
Refer to FCC Part 18.213(c) and KDB 784748Anner A section A.5:
(a) Max. Electric Field Emissions: 6.25V/m
Max. Magnetic Field Emissions: 0.54V/m
(b) The maintenance of the system is the responsibility of the manufacturer.
(c) To prevent interference, the product should be as far away from devices
operating at the same frequency as possible.
P/N