cecotec CLEANFRY LUXURY 4000 User manual

CLEANFRY LUXURY 4000
CLEANFRY LUXURY 4000 BLACK
CLEANFRY LUXURY 4000 DARK
4.2-litre digital fryer with elegant stainless steel design and 5 programmes.
Instruction manual

INDEX
1. Parts and components
2. Before use
3. Operation
4. Cleaning and maintenance
5. Technical specications
6. Disposal of old electrical appliances
7. Technical support and warranty

SAFETY INSTRUCTIONS
Read these instructions thoroughly before using the appliance.
Keep this instruction manual for future reference or new users.
-Make sure that the mains voltage matches the voltage
stated on the rating label of the appliance and that the wall
outlet is grounded.
-Check the power cord regularly for visible damage. If the
cord is damaged, it must be replaced by the ofcial Technical
Support Service of Cecotec in order to avoid any type of
danger.

-Always operate and store the appliance on a at, stable
surface.
-Make sure the product’s handles are properly assembled
and locked in place before use.
-This appliance is not intended to be operated by means of an
external timer or separate remote-control system.
-Always make sure the product’s inner pot is correctly
installed before operating the device.
-The surfaces of the appliance become hot during and after
operation. Do not touch while in use. Allow the appliance to
cool at least 30 minutes before handling and use only heat-
resistant tools. Do not use metal tools as they may
become hot.
-Always unplug the appliance while not in use, before
cleaning and before carrying out maintenance tasks.
-The electrical component is equipped with a safety cut-off,
which ensures that the heating element can only function
when the element is correctly placed on the fryer.
-In case of overheating, the thermal protective device will
switch off the fryer automatically. This device can be
reactivated again by pushing the button with a pointed
object (e.g., a ball pen) through a hole on the back of cord
storage compartment, signed with a word of “Restart”.
Before reactivation, disconnect it from mains and wait for
the system to cool down.
-The use of accessories or parts not provided or recommended
by Cecotec may result in re, electric shock or injuries to
persons and to the product.
-Do not let the cord hang overthe edge ofthe working surface
or countertop, and avoid it from touching hot surfaces.
-Do not use outdoors, near a gas or electric hob, in heated
ovens or near open ames.

-Extreme caution must be used when moving a fryer
containing hot oil or other hot liquids. Do not move the
appliance during use.
-Remove excess surface moisture fromfoods priorto cooking
to prevent heated oil from foaming out when food is added.
- Never leave the appliance unattended while in use.
-A re may occur if the appliance is covered or touches
ammable material, including curtains, draperies, walls,
and the like, when in operation. Do not place anything on top
of the appliance.
-Never pull on the power cord to disconnect the appliance
from the wall outlet; instead, pull on the plug.
-Ensure the oil is within the maximum and minimum marks in
the oil inner pot when in use.
-Never plug in the fryer before adding oil or fat, this could
cause damage to the product and cut power off.
-Supervise young children to make sure that they do not play
with the appliance.
-This appliance is for household use only, do not use it for
commercial or industrial purposes.
-Do not expose or immerse the cord, plug, electrical elements
or any non-removable part of the appliance in water or any
other liquid. Make sure your hands are dry before handling
the plug or switching on the appliance.
-This appliance cannot be used by children.
-This appliance cannot be used by children or people with
reduced physical, sensory or mental capabilities or lack of
experience and knowledge.

3. OPERATION
Note
This type of fryer may only be used with oil or liquid fat and is not suitable for use with solid fat.
Solid fat may contain water, which can cause hot fat to be sprayed out when heated.
1. Remove the lid from the deep fryer and take out the accessories.
2. Take the switch box out, pull on the power cord to connect it to the power supply. Replace
the switch box.
3. Fill the deep fryer with the desired amount of oil or fat. Make sure that it is lled not less
than minimum level and not higher than the maximum level as indicated on the inside of
the appliance. For best results, we recommend that you do not mix different kinds of oil
together.
4. Choose the temperature, which is suitable for what you are frying. Consult the temperature
table.
5. Use the handle to place the basket in the deep fryer.
6. Place the food to be deep red into the basket.
Note
For best results, put dry food into the basket.
7. The fryer will beep when the temperature you have selected has been reached. Always
wait until the selected temperature has been reached. To keep the oil at the selected
temperature, the thermostat repeatedly goes on and off.
8. Lower the basket into the oil slowly to prevent excessive bubbling.
9. Raise the basket again when the frying time has elapsed.
10. Remove the plug from the outlet.
11. Rinse the handle and the basket after use, and dry thoroughly.
12. Once the deep fryer has completely cooled off, empty the oil in the inner pot, clean it and
replace it. Put the basket in the appliance and store it. Store the deep fryer, with the lid
close, in a dark, dry place.
Frying tips
Use a maximum of 200 g of French fries per litre of oil.
With deepfreeze products, use a maximum of 100 g because they quickly cool off. Shake
deepfreeze products above the sink to remove excess ice.
When using fries made from fresh potatoes: dry the fries after washing so that no water will
go into the oil.

Buttons and light indicators
Power button: Light & on/off/conrmation
Mode button: Light & mode setting
Time button: Light & time setting
Temperature button: Light & temperature setting
Standby mode
The deep fryer will emit a single “beep” for 1 s and the display will show “P001”. The Mode
button light will also ash.
Mode selection
1. Press the Mode button in Standby mode to select the desired mode. The display will show
programmes 1 to 5 (P001-P005).
Press it again and the display will show “P001”.
Note
Each mode has a matching preset time and temperature, please check the section “Preset
Time and Temperature”.
2. Press the Temperature button in Standby mode. The display will show the preset
temperature and the temperature button light will turn on.
Press the Temperature button once to increase the temperature by 5 ºC.
Use the Temperature button to adjust the temperature from 110 ºC to 190 ºC.
When the temperature selection reaches 190 ºC, press the Temperature button again and
the temperature will revert back to 110 ºC.
3. Press the Time button in Standby mode and the display will show the preset time and the
corresponding time button light will turn on.
Press the Time button once to increase the time by 1 min.
Use the Time button to adjust the time from 1 min to 99 min. When the time selection
reaches 99 min, press the button again and it will revert back to 1 min.
Shape
NN:XX (N refers to min, X refers to no display).
Throughout the whole process, the digital display will show 0.5 s which means the appliance is
in operation. 0.5 s will ash on the display indicating that it has stopped operation.

Heating mode
1. After selecting a mode, press the ON/OFF button and the display will show the current oil
temperature. The buttons will light up. The device will start the heating process.
2. During the heating process, press the Mode button. Notice that there is no change on the
display or the setting. Press the Time button and the display will show the preset time.
Press the Temperature button to show the preset temperature.
3. During this process, the buttons will remain on and the display will not ash.
Note
The display will show the current temperature for 5 s without you having to press any button.
Waiting mode
Once the oil reaches the preset temperature then the deep fryer will “beep” (beep 0.3 s, stop
0.3 s). The panel will display the current temperature. Should the deep fryer be left without any
selection for 1 min then it will automatically switch to standby mode.
Frying mode
1. After entering the Waiting mode, press the ON/OFF button. The deep fryer will stop
beeping. The set time will show up on the display. The ready light will turn on.
Time format
N:XX or NN:nn (N refers to the remaining minutes, n refers to the remaining seconds, X refers
to no display). Time precision requirements ±3 %.
2. During the frying process, press the Time button and the display will show the preset time.
The time button will light up. Press the Temperature button and the display will show the
preset temperature. Should the deep fryer be left without any selection for 5 s then it will
automatically switch to the countdown timer.
3. Once the fryer reaches the required preset temperature, the heating element will switch
off. If the oil temperature drops to lower than the preset temperature 7±3 °C, the heating
element will automatically turn on again to reach the required preset temperature. The
display will show the countdown timer.
4. Once the deep fryer has reached the end of its preset time, it will emit ten beeps (beep 2 s,
stop 1 s). It will stop heating and then enter Standby mode.
5. Press the ON/OFF button when the fryer is working, and the deep fryer will stop the heating
process. The display will show the default code and switch to setting mode.

preset programs
MODE TEMP (°C ) TIME (Min.)
P001 Frozen French fries 190 7
P002 Fresh potatoes 190 5 min 30 s
P003 Nuggets 190 3
P004 Chicken wings 190 12
P005 Croquettes 190 5
Note
Cooking times andtemperatures are approximate and mayvarydepending on different factors.
4. CLEANING AND MAINTENANCE
Replacing oil
- Make sure that the deep fryer and the oil have totally cooled off before replacing the oil.
- Unplug the cord from the power supply.
-Replace the oil regularly. This is denitely necessary if the oil becomes dark or takes on a
different odour. In any case, replace the oil once after every 10 times’ usage.
- Replace the oil all at once; do not mix old and new oil.
-Do not discard oil in the normal rubbish bin, follow the guidelines of the municipal waste
collector in your area.
General cleaning
- Allow the device to cool completely down before handling, cleaning or repairing it.
- Always unplug the device before cleaning it.
-If the deep fryer is not used regularly, it is recommended to store the oil or liquid fat used,
after cooling, in a container preferably in the fridge or some other cool place. Remember
to strain oil rst.
-Empty the fryer and clean the inner part of oil inner pot with a paper towel, then wipe with
a wet cloth dipped in soapy water. Wipe with a damp cloth and allow it to dry.
-Never immerse the oil inner pot (with power cord) in water and do not clean these parts
under running water.
-Clean regularly the outer part of the fryer with damp cloth and dry it with a soft and clean
towel.

- Do not use abrasive detergents.
-Clean the basket, the lter, the inner pot, and the handle in warm soapy water or in the
dishwasher. Dry thoroughly before using again.
Note
If the basket or the oil pot are washed frequently in the dishwasher, they could present some
scratched or damages.
-When replacing the oil, you can also clean the inside of the deep fryer. Empty the fryer and
clean the inner part of oil inner pot with a paper towel, then wipe with a wet cloth dipped
in soapy water. Wipe with a damp cloth and allow it to dry.
-All components, with the exception of the electrical parts, may be cleaned in warm soapy
water. Dry it thoroughly before using it.
- Store the appliance in a dry, well-ventilated and safe place, out of reach of children.
- Store it in its original package when not using for a long time to avoid soiling.
-There are no user serviceable parts in your fryer. Do not attempt to repair it by yourself.
5. TECHNICAL SPECIFICATIONS
Product reference: 04302/4303/4312
Model: Cleanfry Luxury 4000/ 4000 Black / 4000 Dark
3000 W/AC 2740-3270 W 220-240 V 50-60 Hz
Capacity: 4,2 L
Made in China | Designed in Spain
6. DISPOSAL OF OLD ELECTRICAL APPLIANCES
The European directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE), species that old household electrical appliances
must not be disposed of with the normal unsorted municipal waste. Old
appliances must be collected separately, in order to optimise the recovery
and recycling of the materials they contain and reduce the impact on
human health and the environment.
The crossed out “wheeled bin” symbol on the product reminds you of your
obligation to dispose of the appliance correctly.
Consumers must contact their local authorities or retailer for information concerning the
correct disposal of old appliances and/or their batteries.