cef The Brainstorm Workbench User manual

Parts:
8 Brace Plates
4 Legs
32 Screws 1/4-20 x 20mm serrated
4 Threaded Casters
1) Remove shrink wrap and unbox product, being careful not to scratch or dent the
the butcher block.
2) Lay the butcher block top upside down on a padded surface so as not to damage it.
The frame comes attached to the top and should be snug, but not too tight.
The Brainstorm Workbench
Assembly Instructions
Brace Plates Legs & Screws Casters
Find CEF Brainstorm Workbench @demco.com,
search cef brainstorm workbench
Call 800.962.4463 or email [e-mail]

3) Take legs as shown and turn until the inserts align
with the holes in the frame. Use the 1/4-20 x 20mm
serrated screws to bolt the leg to the frame. Repeat
with each of the four corners unilt all legs are
attached.
4) Once all the legs are attached and tight, go around the frame and tighten all the
confirmat bolts that attach the frame to the table top.
5) Attach the brace plate to the leg and frame using the 1/4-20 x 20mm serrated bolts,
two plates per leg, 8 in total.
Confirmat Bolt

6) Attach a threaded caster to each leg insert. Tighten
with a 3/4" wrench until secure.
Assembly is complete!