Celestron Elements ThermoTank 48011 User manual

COMPONENTS AND PARTS MAIN UNIT
1. Mini USB port
2. ON/OFF button
3. Red LED—Charging indicator
4. Green LED—Heat indicator
5. Top cap
6. Bottom cap
INCLUDED ACCESSORIES
•(1) USB cable
•(1) Soft carrying bag
CHARGING THE INTERNAL LITHIUM ION BATTERY
Your ThermoTank hand warmer has an internal, 4400 mAh
rechargeable Lithium Ion battery, which allows for up to 6
hours of continuous use at a constant temperature of 40°
to 45°C (104° to 113°). Your ThermoTank will ship with a
partial charge, but you should charge it completely before
using it for the first time.
TO CHARGE THE BATTERY:
1. Plug the Mini USB connector into the Mini USB port
(1) on the ThermoTank.
2. Plug the standard USB plug end of the included USB
cable into a USB port on a PC, laptop, car charger or USB
5V-500mA adapter plug
3. Once plugged in, charging will begin and the Red LED
(3) will start to blink.
4. When the Red LED (3) stops blinking, the charge
is complete.
NOTE: The ThermoTank is designed with overcharge
protection to prevent damage to the internal battery.
USING YOUR HAND WARMER
Press the ON/OFF button (2) to turn on your ThermoTank.
The green LED will illuminate. ThermoTank will begin to
heat up and reach its maximum temperature in a few
minutes. Press the ON/OFF button again to turn the unit
off. Use the included silicone caps to help repel moisture
and protect the device from bumps and drops.
SPECIFICATIONS
BATTERY: Rechargeable Lithium Ion—4400 mAh
INPUT: 5V- 900mA
CHARGE TIME: USB—5 hours
USE TIME: At least 6 hours continuous use with
fully charged battery
LED status indicators
(1) Red LED—Charging indicator
(1) Green LED—Heat indicator
NUMBER OF CHARGE CYCLES: >500
OPERATING TEMPERATURE RANGE:
32° to 113°F (0 to 45°C)
STORAGE TEMPERATURE RANGE: 68° to 77° F
(optimal)
WEIGHT AND DIMENSIONS: 148 grams, 45 mm x 95
mm x 23 mm (1.77” x 3.74” x .90”)
NOTE: Storage of more than 6 months without use will have
detrimental effect on battery life.
WARNING:
• “Extreme” temperatures are not recommended when storing
your ThermoTank
• Optimal storage temperature range is:
40° to 77°F (4° to 25°C)
• Optimal operating temperature range is:
14° to 140°F (-10° to 60°C)
Thank you for purchasing a ThermoTank hand warmer. Please read the instructions carefully before using your ThermoTank hand warmer to
ensure proper use and care.
Model # 48011
thermotank™
thermotank™

WARNINGS: Read all instructions and warnings prior to using
this product. Improper use of this product may result in product
damage, excess heat, toxic fumes, fire or explosion, for which
damages you (“Purchaser”), and not Smart Team or Celestron
(collectively “Manufacturer”) are responsible.
• Do not store ThermoTank in high temperature environment,
including intense sunlight heat. Do not place battery in fire
or other excessively hot environments.
• It is not recommended to leave your ThermoTank unused
for an extended period as the lithium polymer battery will
self discharge over time
• If left more more that 3 months without use, it is
recommended that you discharge the battery and then
recharge fully
• Be cautious of excessive drops, bumps, abrasions or other
impacts to this battery. If there is any damage to the
battery such as dents, punctures, tears, deformities or
corrosion, due to any cause, discontinue use and contact
manufacturer or dispose of it in an appropriate manner at
your local battery recycling center.
• Do not disassemble this battery or attempt to repair or
modify it in any manner.
• Do not expose this battery to moisture or submerge it in
liquid. Keep battery dry at all times.
• Do not attempt to charge battery using any method,
apparatus or connection other than the device’s USB
connector. For questions or instructions for the
various ways to charge the ThermoTank refer to this
manual’s “CHARGING THE INTERNAL LITHIUM ION
BATTERY ” section.
• Do not attempt to replace any part of this battery.
• This battery is intended for adult use only. If this battery is
intended by Purchaser to be used by a minor, purchasing
adult agrees to provide detailed instructions and warnings
to any minor prior to use. Failure to do so is sole responsibility
of purchaser, who agrees to indemnify Manufacturer for
any unintended use/misuse by a minor.
• All batteries have gone through a thorough quality assurance
inspection. If you find that your battery is excessively
hot, is emitting odor, is deformed, abrased, cut or is
experiencing or demonstrating an abnormal phenomenon,
immediately stop all battery use and contact Manufacturer.
• Never dispose of batteries in the garbage. Disposal of
batteries in the garbage is unlawful, in The United States,
under state and federal environmental laws and regulations.
Always take used batteries to your local battery-recycling
center.
DISCLAIMER: This Battery is meant for use only in conjunction
with the appropriate devices. Please consult your device
packaging to determine whether this Battery is compatible with
your particular device. Manufacturer is not responsible for any
damages to any device incurred through the use of this product.
Manufacturer shall not in any way be liable to you or to any
third party for any damages you or any third party may suffer
as a result of use, intended or unintended, or misuse of this
battery in conjunction with any device or accessory other than
the appropriate device. Manufacturer will not be responsible
for any damages you or any third party may suffer as a result of
misuse of this battery as outlined above. If you are responsible
for battery use with an unintended device and damages result
from such use, you agree to indemnify Manufacturer for any
resulting injuries to any third party or parties.
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and
receiver.
3. Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
4. Consult the dealer or an experienced technician for help
CAUTION: To comply with the limits of the Class B digital
device, pursuant to Part 15 of the FCC Rules, this device is
comply with Class B limits. All peripherals must be shielded
and grounded. Operation with non-certified peripherals or
non-shielded cables may results in interference to radio
or reception.
MODIFICATION: Any changes or modifications not expressly
approved by the grantee of this device could void the user’s
authority to operate the device.
Torrance, CA 90503
TEL [phone] | www.celestron.com
Copyright 2018 Celestron | All rights reserved.
(Products or instructions may change without
notice or obligation.)
Designed and intended for those 14 years of age and older.
EL-BC-4C : V1.2