Channel Vision Aria A0350 User manual

A0350
Flush Mount Amplifier
0
1
TM
By CANVI SO H N EL I N TM
By CANVI SO H N EL I N
A r i a A r i a
Local In
Ac ivet
psS kr 24VDC
I
IR n
Mn m i
Flush outApl fier

CAT5
Audio
Input
RCA
Output
23
The A0350 Flush Mount Amplifier can be used with Channel Vision’s CAT5
audio hubs to provide a powerful 50Watts per channel in the listening zone.
Alternatively, the A0350 can be added to the SP525, SP650, and SP800
Free Standing Speakers to create a high-quality amplified speaker system.
Features:
!100Wat integrated class D amplifier
!Pre-amp audio outputs for easy connection to powered subwoofer
!Local audio input to override the wireless audio signal
!Input for compatibility with Channel Vision’s CAT5 audio systems
!Easy installation
Rear Panel Features and Connections:
A0350
A0350
Left & Right Audio Trim Pots...
Control the maximum output level of
the amplifier. If audio input level is
quiet, the trim pots will have little
noticeable effect.
Keypad Input... Connect an IR control keypad, such as A0127,
here
Rear Speaker Outputs... Connect in-wall speakers to these
jacks
Jumper 17 & 18 Locations
J17 Pin 1
J18 Pin 1
Volume Jumper... Set J6 to pins 1&2 to select default
power up volume. Set J6 to pins 2&3 to select previous
volume level on power up. (J7 is currently not implemented)
RCA outputs... Connect to powered subwoofer or external
amplifier
CAT5 Audio Input... Connect the output of your CAT5 audio hub
here
J17 & J18 Input Select Jumpers... Set J17 and J18 to pins 2&3
to allow primary input from the CAT5 audio jack. Pin 1&2 are not
implemented on the A0350.
The front RCA inputs will always function as a local source
override.
24VDC Power Input... These terminals allow the power supply to
be connected from the rear of the unit. When these terminals are
used, the front power connection should not be used. Follow the
voltage polarity markings on the screw terminals.
IR Input... Connect IR receiver
here (optional)
Power In... Connect power supply here
Local Audio In... Line-level
audio sensing input that
overrides the primary
wireless or CAT5 audio
Speaker Outputs...
Connect speakers here TM
By C H A NNEL V I S I ON T M
B y C H A N N E L V I S I O N
A r i a A r i a
Local In
Active
Spkrs 24VDCIR In
Flush Mount Amplifier
TM
B y C H A N N E L V I S I O N TM
B y C H A N N E L V I S I O N
A r i a A r i a
Local In
Active
Spkrs 24VDCIR In
Flush Mount Amplifier
Accessories
Power Supply
Screws
Speaker Terminal
Connectors

CAT5
Audio
Input
RCA
Output
23
The A0350 Flush Mount Amplifier can be used with Channel Vision’s CAT5
audio hubs to provide a powerful 50Watts per channel in the listening zone.
Alternatively, the A0350 can be added to the SP525, SP650, and SP800
Free Standing Speakers to create a high-quality amplified speaker system.
Features:
!100Wat integrated class D amplifier
!Pre-amp audio outputs for easy connection to powered subwoofer
!Local audio input to override the wireless audio signal
!Input for compatibility with Channel Vision’s CAT5 audio systems
!Easy installation
Rear Panel Features and Connections:
A0350
A0350
Left & Right Audio Trim Pots...
Control the maximum output level of
the amplifier. If audio input level is
quiet, the trim pots will have little
noticeable effect.
Keypad Input... Connect an IR control keypad, such as A0127,
here
Rear Speaker Outputs... Connect in-wall speakers to these
jacks
Jumper 17 & 18 Locations
J17 Pin 1
J18 Pin 1
Volume Jumper... Set J6 to pins 1&2 to select default
power up volume. Set J6 to pins 2&3 to select previous
volume level on power up. (J7 is currently not implemented)
RCA outputs... Connect to powered subwoofer or external
amplifier
CAT5 Audio Input... Connect the output of your CAT5 audio hub
here
J17 & J18 Input Select Jumpers... Set J17 and J18 to pins 2&3
to allow primary input from the CAT5 audio jack. Pin 1&2 are not
implemented on the A0350.
The front RCA inputs will always function as a local source
override.
24VDC Power Input... These terminals allow the power supply to
be connected from the rear of the unit. When these terminals are
used, the front power connection should not be used. Follow the
voltage polarity markings on the screw terminals.
IR Input... Connect IR receiver
here (optional)
Power In... Connect power supply here
Local Audio In... Line-level
audio sensing input that
overrides the primary
wireless or CAT5 audio
Speaker Outputs...
Connect speakers here TM
B y C H A N N E L V I S I O N T M
B y C H A N N E L V I S I O N
A r i a A r i a
Local In
Active
Spkrs 24VDCIR In
Flush Mount Amplifier
TM
B y C H A N N E L V I S I O N TM
B y C H A N N E L V I S I O N
A r i a A r i a
Local In
Active
Spkrs 24VDCIR In
Flush Mount Amplifier
Accessories
Power Supply
Screws
Speaker Terminal
Connectors

5
4
A0501, A0502, or A0505 ... Remote control. Contains IR
codes for controlling the Amplified Wireless Audio Receiver
as well as many other Channel Vision audio products.
IR-2400 ... Plasma-Proof IR receiver.
A0127 ... IR repeating keypad. The A0127 contains the IR
codes to operate the volume controls in the Amplified
Wireless Audio Receiver. You may also use a standard IR
receiver or a 3rd party keypad. When using a simple IR
receiver, you will need to use the A0505 remote control
which contains the IR codes to control the WA-350, WA-351,
and A0350. IR codes can be downloaded from
www.channelvision.com, or learned from an A0505 remote
control.
Pwr Mute
Vid 1
Vid 2
Vid 3
Vid 4
Vol
+
Vol
-
TM
CAN N E ISIO N
HLV
S
O
U
R
C
E
O EZ N
PEOW R
MUTE
VOL
1
2
3
4
MODEL
A05 1
0
PO E
WR
Accessories & Complementary Products (sold separately)
In-wall, In-ceiling Speakers, and Free Standing
Speakers... Channel Vision offers a full line of premium
speakers. These speakers are perfect for whole-house music
or home theater applications.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions for future reference.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this device near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with these
instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. This apparatus must not be exposed to dripping or splashing and no
objects filled with liquids, such as vases, shall be placed on the
apparatus.
10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Unplug this apparatus during lightning storms or when unused for long
periods of time.
12.
Warning: To reduce the risk of electric shock, do not remove the cover (or
back), no user serviceable parts inside, refer servicing to qualified service
personnel.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISK OF ELECTRIC SHOCK
DO NOT OPEN !

5
4
A0501, A0502, or A0505 ... Remote control. Contains IR
codes for controlling the Amplified Wireless Audio Receiver
as well as many other Channel Vision audio products.
IR-2400 ... Plasma-Proof IR receiver.
A0127 ... IR repeating keypad. The A0127 contains the IR
codes to operate the volume controls in the Amplified
Wireless Audio Receiver. You may also use a standard IR
receiver or a 3rd party keypad. When using a simple IR
receiver, you will need to use the A0505 remote control
which contains the IR codes to control the WA-350, WA-351,
and A0350. IR codes can be downloaded from
www.channelvision.com, or learned from an A0505 remote
control.
Pwr Mute
Vid 1
Vid 2
Vid 3
Vid 4
Vol
+
Vol
-
TM
CAN N E I O N
HLVSI
S
O
U
R
C
E
EZON
PEOW R
MT
UE
VOL
1
2
3
4
MODEL
A0501
POWER
Accessories & Complementary Products (sold separately)
In-wall, In-ceiling Speakers, and Free Standing
Speakers... Channel Vision offers a full line of premium
speakers. These speakers are perfect for whole-house music
or home theater applications.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions for future reference.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this device near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with these
instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. This apparatus must not be exposed to dripping or splashing and no
objects filled with liquids, such as vases, shall be placed on the
apparatus.
10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Unplug this apparatus during lightning storms or when unused for long
periods of time.
12.
Warning: To reduce the risk of electric shock, do not remove the cover (or
back), no user serviceable parts inside, refer servicing to qualified service
personnel.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISK OF ELECTRIC SHOCK
DO NOT OPEN !

MT
By C HANN EL VISION MT
By C HANN EL VISION
Aria Aria
Lcl In
oa
Active
ps
S kr 24VDC
R n
I I
Fsh Mo n m li ielu u t A pf r
A0350 Installation
The A0350 can be installed in the wall using a standard 2-gang junction box or
low-voltage mounting ring. The Flush Mount Amplifier can also be installed into
the back of Channel Vision’s SP525, SP650, or SP800 Free Standing
Speakers.
In-Wall Installation
In-Speaker Installation
7
6
Standard 2-gang ring or extra deep
j-box (not included)
Attach unit with the
provided screws
Attach unit with the
provided screws
One Amplified Receiver can serve one pair of speakers.
Connect speaker wire to
one rear speaker terminal
and connect it to the
terminals on the speaker
Connect a second
speaker wire to
one front speaker
terminal and connect
the other end to the
terminals on the
second speaker
Note: if using a j-box,
it must have a minimum
depth of 3.5”
Using the A0350 Behind a TV
The A0350 can be flush-mounted behind a wall-mounted TV to power in-wall
speakers. By connecting the audio outputs from the TV to the RCA inputs of
the A0350, the TV’s audio signal will be amplified to the in-wall speakers. If the
TV has variable audio outputs, the sound level will simply be controlled by the
TV’s volume buttons. If the TV only offers a fixed audio output, A0350 volume
level can be adjusted by connecting an IR-2400 and using a compatible
remote such as model A0505. The RCA audio outputs on the back of the
A0350 can be connected to a powered subwoofer to add more bass to your
audio system.
TM
y C N L V SI N B HA NE I OTM
y C N L V SI N B HA NE I O
Ar ia
Ar ia
al
Loc In
c v
Ati e
Spkrs 24 DC
V
IR In
Fus ou Am ier
l h M nt pl fi
TM
By CHAN NEL VISION TM
By CHAN NEL VISION
Ar i
aAr i
a
Lol In
ca
Acti e
v
pk s
S r 24VDC
IR In
MuirFlush o nt Ampl fie
Behind the TV
Variable
Line output
from the TV
The TV volume control determines
the volume of the speakers
The TV volume control will determine
the volume of the powered subwoofer.
Front Left Front Right
A0350
TM
B y C HAN NE L V ISI ONTM B y C HAN NE L V ISI ON
A r i a A r i a
Local In
Active
Spkrs 24VDCIR In
Flush Mount Amplifier
Powered
Subwoofer
Take care not to pinch
wires when installing
into 2-gang box.

TM
C I
By HANN EL VIS ON TM
C I
By HANN EL VIS ON
Aria Aria
Local In
tAcive
Spkrs D24V C
R n
I I
Fl sh Mo nt Am lifieru u p
A0350 Installation
The A0350 can be installed in the wall using a standard 2-gang junction box or
low-voltage mounting ring. The Flush Mount Amplifier can also be installed into
the back of Channel Vision’s SP525, SP650, or SP800 Free Standing
Speakers.
In-Wall Installation
In-Speaker Installation
7
6
Standard 2-gang ring or extra deep
j-box (not included)
Attach unit with the
provided screws
Attach unit with the
provided screws
One Amplified Receiver can serve one pair of speakers.
Connect speaker wire to
one rear speaker terminal
and connect it to the
terminals on the speaker
Connect a second
speaker wire to
one front speaker
terminal and connect
the other end to the
terminals on the
second speaker
Note: if using a j-box,
it must have a minimum
depth of 3.5”
Using the A0350 Behind a TV
The A0350 can be flush-mounted behind a wall-mounted TV to power in-wall
speakers. By connecting the audio outputs from the TV to the RCA inputs of
the A0350, the TV’s audio signal will be amplified to the in-wall speakers. If the
TV has variable audio outputs, the sound level will simply be controlled by the
TV’s volume buttons. If the TV only offers a fixed audio output, A0350 volume
level can be adjusted by connecting an IR-2400 and using a compatible
remote such as model A0505. The RCA audio outputs on the back of the
A0350 can be connected to a powered subwoofer to add more bass to your
audio system.
TM
y L V SI N B CH ANN E I OTM
y L V SI N B CH ANN E I O
Ar ia
Ar ia
Local In
Active
pkS rs 24VDC
IR In
usomFl h M unt A plifier
M
T
C E V
By HAN NL ISION M
T
C E V
By HAN NL ISION
Ari a Ari a
Loal In
c
Active
Spk s
r24 D
V C
IIR n
lhMouierF us nt Ampl fi
Behind the TV
Variable
Line output
from the TV
The TV volume control determines
the volume of the speakers
The TV volume control will determine
the volume of the powered subwoofer.
Front Left Front Right
A0350
TM
B y C HAN NE L V ISI ONTM B y C HAN NE L V ISI ON
A r i a A r i a
Local In
Active
Spkrs 24VDCIR In
Flush Mount Amplifier
Powered
Subwoofer
Take care not to pinch
wires when installing
into 2-gang box.

9
8
Using the A0350 in a Stand-alone System
The A0350 can be flush-mounted in a room to power in-wall speakers. By
connecting the audio outputs from an audio source to the RCA inputs of the
A0350, the audio signal will be amplified to the in-wall speakers. Most audio
sources only offer a fixed audio output, A0350 volume level can be adjusted by
using an A0127 keypad or by connecting an IR-2400 and using a compatible
remote such as model A0505. The RCA audio outputs on the back of the
A0350 can be connected to a powered subwoofer to add more bass to your
audio system.
A0127
A0350
Pwr Mute
Vid 1
Vid 2
Vid 3
Vid 4
Vol
+
Vol
-
TM
B y C H A N N E L V I S I O N TM B y C H A N N E L V I S I O N
A r i a A r i a
Local In
Active
Spkrs 24VDCIR In
Flush Mount Amplifier
Left Right
CD player
The keypad volume control will determine
the volume of the in-wall speakers as well
as the powered subwoofer.
Powered
Subwoofer
PRO
CH A N N E L
TM
VI S I O N
CH A N N E L
VI S I O NTM
tAc ive t vAc i e
t vAc i e
t
Ac ive
Link
n
I
Link
Out
Zone 1
n Zo e 2
Zon
e 3
Zon
e 4
Source 1 Source 2 Source 3 Source 4
Common IR
Source 4 IR
Source 3 IR
Source 2 IRSource 1 IR
IR Data
Power
TM
CHAL SN
NN E VI IO
Model P-2044
Using the A0350 with a CAT5 Audio Hub
The A0350 can accept the signal from one Channel Vision’s CAT5 Audio Hubs,
such as the P-2044. Audio and IR signals are transmitted through the CAT5
cable, while power is connected directly to the front of the A0350. Alternatively,
power can be connected via a pair of 16AWG wires to the power screw
terminals on the back side of the A0350.
A0127
A0350
Pwr Mute
Vid 1
Vid 2
Vid 3
Vid 4
Vol
+
Vol
-
(Optional)
IR emitters
P-2044
A0301
A0313
CD player Sat Radio
Line level inputs
IR emitters
TM
B y C H A N N E L V I S I O N TM B y C H A N N E L V I S I O N
A r i a A r i a
Local In
Active
Spkrs 24VDCIR In
Flush Mount Amplifier
Left Right
123
456
789
0
ePowr
Integrated IR repeating
allows sources to be
controlled

9
8
Using the A0350 in a Stand-alone System
The A0350 can be flush-mounted in a room to power in-wall speakers. By
connecting the audio outputs from an audio source to the RCA inputs of the
A0350, the audio signal will be amplified to the in-wall speakers. Most audio
sources only offer a fixed audio output, A0350 volume level can be adjusted by
using an A0127 keypad or by connecting an IR-2400 and using a compatible
remote such as model A0505. The RCA audio outputs on the back of the
A0350 can be connected to a powered subwoofer to add more bass to your
audio system.
A0127
A0350
Pwr Mute
Vid 1
Vid 2
Vid 3
Vid 4
Vol
+
Vol
-
TM
B y C H A N N E L V I S I O N TM B y C H A N N E L V I S I O N
A r i a A r i a
Local In
Active
Spkrs 24VDCIR In
Flush Mount Amplifier
Left Right
CD player
The keypad volume control will determine
the volume of the in-wall speakers as well
as the powered subwoofer.
Powered
Subwoofer
PRO
CH A N N E L
TM
VI S I O N
CH A N N E L
VI S I O NTM
Atvec i Active
Active
At ve
c i
i k
Ln
In
i k
Ln
Out
on Z e 1
Zone 2
nZo e 3
nZo e 4
Source 1 Source 2 Source 3 Source 4
Common IR
Source 4 IR
Source 3 IR
Source 2 IRSource 1 IR
IR Data
Power
TM
CHAN N E L VI S I O N
o P 2M del - 044
Using the A0350 with a CAT5 Audio Hub
The A0350 can accept the signal from one Channel Vision’s CAT5 Audio Hubs,
such as the P-2044. Audio and IR signals are transmitted through the CAT5
cable, while power is connected directly to the front of the A0350. Alternatively,
power can be connected via a pair of 16AWG wires to the power screw
terminals on the back side of the A0350.
A0127
A0350
Pwr Mute
Vid 1
Vid 2
Vid 3
Vid 4
Vol
+
Vol
-
(Optional)
IR emitters
P-2044
A0301
A0313
CD player Sat Radio
Line level inputs
IR emitters
TM
B y C H A N N E L V I S I O N TM B y C H A N N E L V I S I O N
A r i a A r i a
Local In
Active
Spkrs 24VDCIR In
Flush Mount Amplifier
Left Right
123
456
789
0
eP w
or
Integrated IR repeating
allows sources to be
controlled

10 11
Specifications: (typical at 25 degrees C)
Amplifier:
Power input: 24VDC
Output power: 50 Watts/ch RMS into 6 ohms @ <10% THD
Frequency Response: 20-20kHz (+/-3dB)
Signal to Noise Ratio: >85dB
Input Sensitivity: 500mVRMS
Auto On Threshold: 10mVRMS
Storage Temperature: -40 to +85º C
Operating temperature: 0 to +55º C
Specifications subject to change without notice
Troubleshooting:
Problem: Hum in System
Troubleshooting: Plug all parts of the system into the same outlet to see if
the hum goes away. Try lifting the ground with a ground lifting plug.
Cause: The different components in the system are connected to different
electrical grounds. This forces electrical currents to find alternate paths to
ground causing an audible 60Hz hum.
Solution: Plug products into an electrical circuit with a common ground.
Problem: CAT5 Audio input is not working.
Troubleshooting: Make sure there is a strong and constant signal coming
from the CAT5 Audio Hub. Make sure audio signals are NOT connected to
the front RCA jacks (these signals will override the CAT5 input). Make sure
jumper J17 and J18 are on pins 1&2. Check if “Active” LED indicator on the
front panel is lit.
Cause: There is no signal (or very weak signal) coming from the source.
There is a source connected to the front RCA jacks that is overriding the
CAT5 input. Jumpers J17 and J18 are on the wrong pins causing the CAT5
audio input to be disabled.
Solution: Remove or turn off any audio source connected to the front RCA
jacks. Set jumpers J17 and J18 to pins 1&2. Make sure the source audio is
playing.
PRO
CH A N N E L
TM
VI S I O N
CH A N N E L
VI S I O NTM
Active t
Ac ive
t
Ac ive
Active
i k
Ln
In
i k
Ln
Out
Zone 1
nZo e 2
n
Zo e 3
n
Zo e 4
Source 1 Source 2 Source 3 Source 4
Common IR
Source 4 IR
Source 3 IR
Source 2 IRSource 1 IR
IR Data
Power
TM
CHA E L SN
NNVI IO
2Model P- 044
Using the A0350 with a CAT5 Audio Hub - Alternate Setup
The A0350 can accept the signal from one Channel Vision’s CAT5 Audio Hubs,
such as the P-2044. An A0125 keypad can be wired in the CAT5 line along
with other input modules to accommodate a more traditional CAT5 Audio
wiring scheme. If an additional 2-conductor 16 AWG wire is run between the
A0350 and main equipment location, the A0350 power supply can be remotely
located and connected via the rear-panel screw terminals.
A0350
(Optional)
IR emitters
Wiring Key
G - GreenWhite & OrangeWhite
RT - Orange (solid)
LT - Green (solid)
To CAT5
Audio Input
P-2044
A0301
A0313
CD player Sat Radio
Line level inputs
IR emitters
TM
B y C H A N N E L V I S I O N TM B y C H A N N E L V I S I O N
A r i a A r i a
Local In
Active
Spkrs 24VDCIR In
Flush Mount Amplifier
Left Right
A0125
(Rear)
Note: Local input
modules such as
A0313 and A0301
can be installed
between the A0125
and the P-2044.

10 11
Specifications: (typical at 25 degrees C)
Amplifier:
Power input: 24VDC
Output power: 50 Watts/ch RMS into 6 ohms @ <10% THD
Frequency Response: 20-20kHz (+/-3dB)
Signal to Noise Ratio: >85dB
Input Sensitivity: 500mVRMS
Auto On Threshold: 10mVRMS
Storage Temperature: -40 to +85º C
Operating temperature: 0 to +55º C
Specifications subject to change without notice
Troubleshooting:
Problem: Hum in System
Troubleshooting: Plug all parts of the system into the same outlet to see if
the hum goes away. Try lifting the ground with a ground lifting plug.
Cause: The different components in the system are connected to different
electrical grounds. This forces electrical currents to find alternate paths to
ground causing an audible 60Hz hum.
Solution: Plug products into an electrical circuit with a common ground.
Problem: CAT5 Audio input is not working.
Troubleshooting: Make sure there is a strong and constant signal coming
from the CAT5 Audio Hub. Make sure audio signals are NOT connected to
the front RCA jacks (these signals will override the CAT5 input). Make sure
jumper J17 and J18 are on pins 1&2. Check if “Active” LED indicator on the
front panel is lit.
Cause: There is no signal (or very weak signal) coming from the source.
There is a source connected to the front RCA jacks that is overriding the
CAT5 input. Jumpers J17 and J18 are on the wrong pins causing the CAT5
audio input to be disabled.
Solution: Remove or turn off any audio source connected to the front RCA
jacks. Set jumpers J17 and J18 to pins 1&2. Make sure the source audio is
playing.
PRO
CH A N N E L
TM
VI S I O N
CH A N N E L
VI S I O NTM
tv
Ac i e At ve
c i
At ve
c i
t vAc i e
Link
In
Link
Out
n Zo e 1
Zone 2
Zone 3
Zone 4
Source 1 Source 2 Source 3 Source 4
Common IR
Source 4 IR
Source 3 IR
Source 2 IRSource 1 IR
IR Data
Power
TM
NCHAN N E L VI S I O
o P 2 4M del - 04
Using the A0350 with a CAT5 Audio Hub - Alternate Setup
The A0350 can accept the signal from one Channel Vision’s CAT5 Audio Hubs,
such as the P-2044. An A0125 keypad can be wired in the CAT5 line along
with other input modules to accommodate a more traditional CAT5 Audio
wiring scheme. If an additional 2-conductor 16 AWG wire is run between the
A0350 and main equipment location, the A0350 power supply can be remotely
located and connected via the rear-panel screw terminals.
A0350
(Optional)
IR emitters
Wiring Key
G - GreenWhite & OrangeWhite
RT - Orange (solid)
LT - Green (solid)
To CAT5
Audio Input
P-2044
A0301
A0313
CD player Sat Radio
Line level inputs
IR emitters
TM
B y C H A N N E L V I S I O N TM B y C H A N N E L V I S I O N
A r i a A r i a
Local In
Active
Spkrs 24VDCIR In
Flush Mount Amplifier
Left Right
A0125
(Rear)
Note: Local input
modules such as
A0313 and A0301
can be installed
between the A0125
and the P-2044.

500-237 rev C
ww w . c h a n n e l v i s i o n . c o m
234 Fischer Avenue, Costa Mesa, California 92626 USA
[phone] [phone] [phone] fax
email: [email protected]
1
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
!Reorient or relocate the receiving antenna.
!Increase the separation between the equipment and receiver.
!Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
!Consult the dealer or an experienced radio/TV technician for help.
!Modifications not expressly approved by the manufacturer could void the
user's authority to operated the equipment under FCC rules.
FOR HOME OR OFFICE USE FOR HOME OR OFFICE USE
Channel Vision A0350Channel Vision A0350
Tested To ComplyTested To Comply
With FCC StandardsWith FCC Standards
Channel Vision Technology will repair or replace any defect in material or workmanship which
occurs during normal use of this product with new or rebuilt parts, free of charge in the USA, for
one year from the date of original purchase. This is a no hassle warranty with no mail in
warranty card needed. This warranty does not cover damages in shipment, failures caused by
other products not supplied by Channel Vision Technology, or failures due to accident, misuse,
abuse, or alteration of the equipment. This warranty is extended only to the original purchaser,
and a purchase receipt, invoice, or other proof of original purchase date will be required before
warranty repairs are provided.
Mail in service can be obtained during the warranty period by calling [phone] toll free.
A Return Authorization number must be obtained in advance and can be marked on the outside
of the shipping carton.
This warranty gives you specific legal rights and you may have other rights (which vary from
state to state). If a problem with this product develops during or after the warranty period,
please contact Channel Vision Technology, your dealer or any factory-authorized service
center.
Channel Vision products are not intended for use in medical, lifesaving, life sustaining or
critical environment applications. Channel Vision customers using or selling Channel Vision
products for use in such applications do so at their own risk and agree to fully indemnify
Channel Vision for any damages resulting from such improper use or sale.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.