Channel Vision Audio/Video Distribution Amplifier VDA-12 User manual

CHANNEL VISION
Limited Warranty
Channel Vision Technology will repair or replace any defect in
material or workmanship which occurs during normal use of this
product with new or rebuilt parts, free of charge in the USA, for two
years from the date of original purchase. This is a no hassle warranty
with no mail in warranty card needed. This warranty does not cover
damages in shipment, failures caused by other products not supplied
by Channel Vision Technology, or failures due to accident, misuse,
abuse, or alteration of the equipment. This warranty is extended only
to the original purchaser, and a purchase receipt, invoice, or other
proof of original purchase date will be required before warranty
repairs are provided.
Mail in service can be obtained during the warranty period by calling
[phone] toll free. A Return Authorization number must be
obtained in advance and can be marked on the outside of the shipping
carton.
This warranty gives you specific legal rights and you may have other
rights (which vary from state to state). If a problem with this product
develops during or after the warranty period, please contact Channel
Vision Technology, your dealer or any factory-authorized service
center.
500-022 rev B
VDA-12
Audio/Video Distribution Amplifier
© 2004, Channel Vision™
CVHANNEL ISION
TM
234 Fischer Avenue Costa Mesa, CA 92626
[phone] [phone] [phone] fax
www.channelvision.com email: sales @ channelvision.com
·
··
·
CVHANNEL ISION
TM

Description:
Channel Vision’s VDA-12 is an audi o and base-band video distribution
amplifier. It can expand the RCA output socket of your AV equipment by
incorporating an audio input and a video input, which are distributed to
twelve audio/video outputs. A built-in clamp circuit was designed to
eliminate up & down roll pictures. The VDA-12 offers optimal picture
quality with the audio/video cascade outputs that feature automatic video
impedance. Overall, the VDA-12 is especially useful for connecting
audio/video components to RF modulators or multiple zones.
Audio: Video:
Input Impedance 20K ohm 1K ohms
Output Impedance 600ohms 75 ohms
Gain 11dB 6dB
Clamp Cability 60dB
Frequency Response 20Hz to 20XHz 20Hz to 8MHz
Max. Input 5Vp-p 4Vp-p
Max. Output 4.5Vp-p(4/7x Load) 1.8Vp-p(75ohms
load)
Power Requirement AC 110V/60Hz or AC 220V/50Hz
Power Consumption 5W (Max.)
Specifications:
Gold plated RCA connectors
17” component, space saving – inline power adapter
Black brushed aluminum
Low distortion
1 – Set AV input, 12 – Set AV output
Dimensions: 3-1/8” x 17-1/8” x 9-1/2” (H) x (W) x (D)
Features:
¿
¿
¿
¿
¿
¿
Satellite Receiver
Laser Disk Player VCR
A/V INPUTS VIDEO OR REC OUT
VDA-12
CHANNEL VISION
VIDEO DISTRIBUTION AMPLFIER
U
S
IN
G
THE VDA-12 F
O
R MULTI-R
OO
M
VIDEO DISTRIBUTION
AUDIO / VIDEO OUTPUT
AUDIO / VIDEO PRE-AMP OR
RECEIVER
FUSE
AUDIO VIDEO
LEVEL ADJUST
I
N
P
U
T
O
U
T
P
U
T
VIDEO
AUDIO L
AUDIO R
AUDIO
FUSE