Channel Vision Aria A1260 User manual

CHANNEL VISION
Limited Warranty
Channel Vision Technology will repair or replace any defect in material or
workmanship which occurs during normal use of this product with new or rebuilt
parts, free of charge in the USA, for two years from the date of original purchase.
This is a no hassle warranty with no mail in warranty card needed. This warranty
does not cover damages in shipment, failures caused by other products not
supplied by Channel Vision Technology, or failures due to accident, misuse, abuse,
or alteration of the equipment. This warranty is extended only to the original
purchaser, and a purchase receipt, invoice, or other proof of original purchase date
will be required before warranty repairs are provided.
Mail in service can be obtained during the warranty period by calling (800) 840-
0288 toll free. A Return Authorization number must be obtained in advance and
can be marked on the outside of the shipping carton.
This warranty gives you specific legal rights and you may have other rights (which
vary from state to state). If a problem with this product develops during or after the
warranty period, please contact Channel Vision Technology, your dealer or any
factory-authorized service center.
500-009 rev A
Specifications:
Operating Temperature:
AC fuse:
(typical @25º C)
-10ºC to +60ºC
10A Slo-blo 5x20mm
Output Frequency Range:
Output Level:
Turn on delay:
Turn off delay:
HD:
Power Consumption:
20-20kHz
60 W/ch 8ohms
60 W/ch 4 ohms
(With 120VAC or 240VAC input)
< 500msec
~ 30-100 seconds
T < .1% @ 1kHz
< 35 W (no input)
Specifications subject to change without notice.
12 channel audio amplifie
r
A1260 / A1260R
CVHANNEL ISION
TM
© 2003 Channel Vision Technolo
gy
234 Fischer Avenue Costa Mesa, CA 92626
[phone] [phone] [phone] fax
www.channelvision.com email: sales @ channelvision.com
·
··
·
Aria By Channel Vision 12 CHANNEL AMPLIFIER
A1260
Aria By Channel Vision 12 CHANNEL AMPLIFIER
A1260

2
The A1260 is a 12 channel audio amplifier designed for whole-house audio
systems. The amplifier is organized into 6 stereo pairs. Each pair may be
driven with a system wide signal, or its own input.
Each of the 12 channels will turn on automatically at the presence of an
audio signal and will turn off when the audio signal is gone. Unlike other,
zone-by-zone power sensors, this allows up to 12 independent monaural
channels.
The A1260 is available in a rack mount version, A1260R.
The A1260 is intended to be constantly on. Power consumption during times
of no audio is less than 30 watts.
L out
R out
TO PREVENT ELECTRIC SHOCK,
DO NOT REMOVE COVER.
NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
TO QUALIFIED SERVICE
110 /220V
110 /220V
0/ 60 Hz
10 A
SLOW BLOW
2
1
Local
Global
L in
R in
R out
R in
L in Global L out
GLOBAL
INPUT
R
L
CAUTION:
PERSONAL ONLY.
Local
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
120
240
R
ear
P
A1260
Aria By Channel Vision 12 CHANNEL AMPLIFIER
A1260
3








Each zone may be switched between the global input and the
local input.
Sources connected to Global input can be heard in all 6
zones.
110-120 or 220-240 operation
Each channel has independent turn-on sensors.
Torroidal power transformer with 4 secondaries to maximize
separation.
Computer-grade components throughout to ensure long-life.
Turn on time <500msec Turn off time ~ 30-100 seconds
Ideal companion to A4600 Matrix A/V controller
CHANNELS
63 4 5
Global L out
L in
R in
R out
R out
L outGlobal
L in
R out
Global
R in R in
L in L out
R out
R in
L in Global L out
TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS UNIT TO RAIN
OR MOISTURE.
WARNING: CHANNEL VISION
CHANNEL VISION
MODEL NUMBER: A1260
MODEL NUMBER: A1260
12 CHANNEL AMPLIFIER
12 CHANNEL AMPLIFIER
Local Local Local Local
ARIA BY
P
ane
l
A1260R
Aria By Channel Vision 12 CHANNEL AMPLIFIER
A1260