Chauvet DJ 6SPOT User manual

User Manual

Table of Contents
6SPOT RGBW User Manual Rev. 1
TABLE OF CONTENTS
1. Before You Begin ....................................................................... 1
What Is Included ........................................................................................... 1
Unpacking Instructions.................................................................................. 1
Claims ..................................................................................................................... 1
Text Conventions .......................................................................................... 1
Symbols ........................................................................................................ 1
Disclaimer ..................................................................................................... 1
Intellectual Property ...................................................................................... 1
Safety Notes.................................................................................................. 2
2. Introduction ................................................................................ 3
Product Overview.......................................................................................... 3
Product Dimensions ...................................................................................... 3
3. Setup ........................................................................................... 4
AC Power...................................................................................................... 4
Fuse Replacement .................................................................................................. 4
Power Linking.......................................................................................................... 4
Mounting ....................................................................................................... 5
Orientation............................................................................................................... 5
Rigging .................................................................................................................... 5
4. Operation .................................................................................... 6
Control Panel Operation................................................................................ 6
Menu Map ..................................................................................................... 6
Configuration (DMX) ..................................................................................... 6
Starting Address and Personality............................................................................ 6
DMX Channel Assignments and Values ....................................................... 7
8Ch.......................................................................................................................... 7
3Ch.......................................................................................................................... 8
Configuration (Standalone) ........................................................................... 9
Automatic Programs................................................................................................ 9
Auto-Program Speed............................................................................................... 9
Sound-Active Mode ................................................................................................. 9
Sound Sensitivity..................................................................................................... 9
Preset Color Mode .................................................................................................. 9
Invert Pod Order...................................................................................................... 9
IRC-6 Infrared Remote Control ..................................................................... 9
IRC-6 Operation ...................................................................................................... 10
Master/Slave Mode ....................................................................................... 10
5. Maintenance................................................................................ 11
Product Maintenance .................................................................................... 11
6. Technical Specifications ........................................................... 12
Returns............................................................................................ 13
Contact Us ...................................................................................... 14

Page 1 of 14
6SPOT RGBW User Manual Rev. 1
Before You Begin
1. Before You Begin
What Is Included
Unpacking Instructions
Carefully unpack the product immediately and check the container to make sure all the parts are in the
package and are in good condition.
Claims
If the box or the contents (the product and included accessories) appear damaged from shipping, or show
signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier
immediately may invalidate your claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed
damage, file a claim with Chauvet within 7 days of delivery.
Text Conventions
Symbols
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However,
Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,
damage or disruption caused by any errors or omissions in this document, whether such errors or
omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the
content of this document without any obligation to notify any person or company of such revision, however,
Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest
version from www.chauvetdj.com.
Intellectual Property
The works of authorship contained in this manual, including, but not limited to, all design, text and images
are owned by Chauvet.
© Copyright 2021 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
CHAUVET, the Chauvet logo, and 6SPOT RGBW are registered trademarks or trademarks of Chauvet &
Sons LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company
and product names and logos referred to herein may be trademarks of their respective companies.
•6SPOTRGBW
•Powercord
• Hanging bracket
• Quick Reference Guide
Convention Meaning
1–512 A range of values
50/60 A set of values of which only one can be chosen
Settings A menu option not to be modified
<ENTER> A key to be pressed on the product’s control panel
ON A value to be entered or selected
Symbol Meaning
Electrical warning. Not following these instructions may cause electrical damage to
the product, accessories, or the user.
Critical installation, configuration, or operation information. Not following these
instructions may make the product not work, cause damage to the product, or cause
harm to the operator.
Important installation or configuration information. The product may not function
correctly if this information is not used.
Useful information.

Page 2 of 14
Before You Begin
6SPOT RGBW User Manual Rev. 1
Safety Notes
• This product is not intended for permanent installation.
• Always connect the product to a grounded circuit to avoid the risk of electrocution.
• Always disconnect the product from the power source before cleaning or replacing the fuse.
• Avoid direct eye exposure to the light source while the product is on.
• Make sure the power cord is not crimped or damaged.
• Never disconnect the product from power by pulling or tugging on the cord.
• If mounting the product overhead, always secure to a fastening device using a safety cable.
• Make sure there are no flammable materials close to the product when operating.
• Do not touch the product’s housing when operating because it may be very hot.
• The voltage of the outlet to which you are connecting this product must be within the range
stated on the decal or rear panel of the product.
• The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose the
product to rain or moisture.
• Always install the product in a location with adequate ventilation, at least 20 in (50 cm) from
adjacent surfaces.
• Be sure that no ventilation slots on the product’s housing are blocked.
• Never connect the product to a dimmer or rheostat.
• Make sure to replace the fuse with another of the same type and rating.
• Never carry the product from the power cord or any moving part. Always use the handles.
• The maximum ambient temperature is 104 °F (40 °C). Do not operate this product at higher
temperatures.
• In the event of a serious operating problem, stop using the product immediately.
• Do not open this product. It contains no user-serviceable parts.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
Keep this User Manual for future use. If the product is sold to someone else, be sure that they
also receive this document.

Page 3 of 14
6SPOT RGBW User Manual Rev. 1
Introduction
2. Introduction
Product Overview
Product Dimensions
DMX
in/out
Fuse
holder
Power
in
Menu
buttons
LED
display
Power
out MicrophoneIR sensor
6.5 in
165 mm
2.2 in
56 mm
35.5 in
902 mm

Page 4 of 14
Setup
6SPOT RGBW User Manual Rev. 1
3. Setup
AC Power
The 6SPOT RGBW has an auto-ranging power supply and it can work with an input voltage range of 100
to 240 VAC, 50/60 Hz.
To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current
value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart.
The listed current rating indicates the product’s average current draw under normal conditions.
Fuse Replacement
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the fuse holder out of the housing.
4. Remove the blown fuse from the holder and replace with a fuse of the exact same type and rating.
5. Insert the fuse holder back in place and reconnect power.
Power Linking
The product provides power linking via the outlet located in the back of the product. See the diagram below
for further explanation.
Power Linking Diagram
• Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure
the product has an appropriate electrical ground to avoid the risk of electrocution or
fire.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the
rheostat or dimmer channel serves only as a 0 to 100% switch.
Disconnect the product from the power outlet before replacing the fuse.
You can power link up to 11 6SPOT RGBW products on 120 VAC or up to 20 6SPOT RGBW
products on 230 VAC.
The power linking diagram corresponds to the North American version of the product ONLY!
If using the product in other markets, you must consult with the local Chauvet distributor
as power linking connectors and requirements may differ in your country or region.
Safety cap
Spare fuse holder
(inside safety cap)
Installed fuse
(held by plastic clip)
1st Product
2nd Product
3rd Product
Additional
Products
Power
Source

Page 5 of 14
6SPOT RGBW User Manual Rev. 1
Setup
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
Orientation
The 6SPOT RGBW may be mounted in any position; however, make sure adequate ventilation is provided
around the product.
Rigging
• Before deciding on a location, always make sure there is easy access to the product for
maintenance and programming.
• Make sure adequate ventilation is provided around the product.
• Make sure that the structure or surface onto which you are mounting the product can support the
product’s weight. (see the Technical Specifications)
• When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
• When power linking multiple products, mount the products close enough for power linking cables to
reach.
• When mounting the product on the floor, make sure that the product and cables are away from
people and vehicles.
Mounting Diagram
Safety Cable
(such as CH-05
from Chauvet)
Mounting Clamp (x2)
(such as CLP-15 from Chauvet)
Mounting Bracket
(x2)
Bracket Adjustment Knob
(x2)
Alternative Mounting Point
(x2)
Tripod Mounting Point

Page 6 of 14
Operation
6SPOT RGBW User Manual Rev. 1
4. Operation
Control Panel Operation
To access the control panel functions, use the four buttons located underneath the display. Please refer to
the Product Overview to see the button locations on the control panel.
Menu Map
Refer to the 6SPOT RGBW product page on www.chauvetdj.com for the latest menu map.
Configuration (DMX)
The 6SPOT RGBW works with a DMX controller. Information about DMX is in the CHAUVET DMX Primer,
which is available from the Chauvet website http://www.chauvetlighting.com/downloads/
DMX_Primer_rev05_WO.pdf.
Starting Address and Personality
When selecting a starting DMX address, always consider the number of DMX channels the selected DMX
mode uses. If the starting address is set too high, access to some of the product’s channels could be
restricted.
The 6SPOT RGBW uses up to 8 DMX channels, which defines the highest configurable address to 505.
For information about the DMX protocol, download the DMX Primer from www.chauvetdj.com.
To select the starting address and personality, do the following:
1. Press <MENU> repeatedly until 3Ch or 8Ch shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the starting address, from d001–512.
4. Press <ENTER>.
Button Function
<MENU> Press to find an operation mode or to back out of the current menu option
<UP> Press to scroll up the list of options or to find a higher value
<DOWN> Press to scroll down the list of options or to find a lower value
<ENTER> Press to activate a menu option or a selected value
Mode Programming Levels Description
DMX Mode 3Ch d001–512 3-channel DMX mode
8Ch 8-channel DMX mode
Static Colors C--- C001–022 Static colors
Automatic
Programs P--- P001–025 Automatic programs
Program
Speed S--- S001–100 Program speed for P 1–25
Sound-
Active Mode Snd Snd1–9 Sound-active mode
Invert h--- no Keep order of pods
YES Reverse order of pods
Infrared
Mode SEt on Turns infrared on or off
oFF

Page 7 of 14
6SPOT RGBW User Manual Rev. 1
Operation
DMX Channel Assignments and Values
8Ch
Channel Function Value Percent/Setting
1Pod1
000 010 No function
011 045 Red
046 080 Green
081 115 Blue
116 150 Yellow
151 185 Magenta
186 220 Cyan
221 255 White
2
Auto Program Speed
(when Ch. 8 is 006 255)
000 250 Program speed, slow to fast
251 255 Sound-active mode
Pod 2
000 010 No function
011 045 Red
046 080 Green
081 115 Blue
116 150 Yellow
151 185 Magenta
186 220 Cyan
221 255 White
3Pod3
000 010 No function
011 045 Red
046 080 Green
081 115 Blue
116 150 Yellow
151 185 Magenta
186 220 Cyan
221 255 White
4Pod4
000 010 No function
011 045 Red
046 080 Green
081 115 Blue
116 150 Yellow
151 185 Magenta
186 220 Cyan
221 255 White
5Pod5
000 010 No function
011 045 Red
046 080 Green
081 115 Blue
116 150 Yellow
151 185 Magenta
186 220 Cyan
221 255 White
6Pod6
000 010 No function
011 045 Red
046 080 Green
081 115 Blue
116 150 Yellow
151 185 Magenta
186 220 Cyan
221 255 White

Page 8 of 14
Operation
6SPOT RGBW User Manual Rev. 1
3Ch
7 Strobe 000 009 No function
010 255 Strobe, slow to fast
8 Auto Programs
000 005 No function
006 020 Auto program 1
021 035 Auto program 2
036 050 Auto program 3
051 065 Auto program 4
066 080 Auto program 5
081 095 Auto program 6
096 110 Auto program 7
111 125 Auto program 8
126 140 Auto program 9
141 155 Auto program 10
156 170 Auto program 11
171 185 Auto program 12
186 200 Auto program 13
201 215 Auto program 14
216 230 Auto program 15
231 255 Auto program 16
Channel Function Value Percent/Setting
1 Auto Programs
000 005 No function
006 020 Auto program 1
021 035 Auto program 2
036 050 Auto program 3
051 065 Auto program 4
066 080 Auto program 5
081 095 Auto program 6
096 110 Auto program 7
111 125 Auto program 8
126 140 Auto program 9
141 155 Auto program 10
156 170 Auto program 11
171 185 Auto program 12
186 200 Auto program 13
201 215 Auto program 14
216 230 Auto program 15
231 255 Auto program 16
2 Automatic Program Speed 000 250 Program speed, slow to fast
251 255 Sound-active mode
3 Dimmer 000 255 0–100%
Channel Function Value Percent/Setting