Introduction
Congratulations on the purchase of your new CHAUVET lighting controller. We are
confident you will enjoy many trouble free hours with this unit. To assist with the
care and use of the product we have prepared this short guide.
Features
This unit is swichable and has been designed to operate on 120V-50/60Hz or
230V-50/60Hz.
Operation
The unit has been designed to hold a maximum of 2,400 watts or 20 Amp circuit.
Unit features 4 channels with two AC outlets per channel. Simply plug lights into the
AC outlets on the front or ropelight into the “Ropelight Connector” on the rear.
Operate Par Cans, Pinspots, Mini Moons and more. Maximum load per channel
600 watts (5amps).
When plugged in, unit will power on automatically. Unit will chase to music via the
built in microphone and automatically advance through the built in 16 chase
patterns. Indicator lights on top of unit will flash according to pattern. Adjust sound
sensitivity via knob on front of unit.
Controllers may be linked for added versatility via CH-DIN10 linking cable (sold sep-
arately). Utilize Foot Switch (sold separately) to control the functions. Functions
include: All On, Chasing, and Blackout.
Replacing Fuses
If the unit does not function when plugged in ie. items plugged into unit do not
operate, then it is likely that a fuse has blown.
Unplug unit before attempting to replace fuses.
In order to replace the fuse, unscrew the “Fuseholder Cover” to reveal the fuse.
The unit has a label attached which indicates the correct fuse rating or you may
refer to the Technical Specifications section of this guide. It is most important that
replacement fuses are of the correct rating. Failure to use the correct fuse could
damage the unit beyond economic repair.
The fuse should simply be placed inside the fuseholder and the screw cap
replaced. It is now safe to plug the unit back in.
Cleaning
The body of the unit may be cleaned with a soft damp cloth. We recommend
internal cleaning be carried out by a fully qualified technician.
Maintenance & Servicing
Work on internal parts should be carried out by a qualified technician. Removal of
any covers other than the “Fuseholder” is considered a breach of warranty an will
not be covered under any such agreement unless authorized by CHAUVET.
Troubleshooting
• If the unit is not functional - check that unit is fully plugged in and then check
fuses.
• If fuses blow continuously - check load per channel (maximum 600 watts)
No user serviceable parts inside, please refer to CHAUVET for service.
USA
Technical Assistance: 1-800-762-1084 (954) 929-1115
At the Rear:
Mounting Brackets
On Bottom:
Voltage Selector
Ropelight Connector
Linking in/out
Footswitch Outlet
Mounting Bracket
Sound Sensitivity
Screw Cap Fuse
Holders
AC Outlets
