Chauvet Strike 4 User manual

User Manual

Edition Notes
STRIKE 4 User Manual Rev. 1
Edition
Notes
The STRIKE 4 User Manual Rev. 1 covers the description, safety precautions, installation,
programming, operation, and maintenance of the STRIKE 4. Chauvet released
this edition of
the STRIKE 4 User Manual in August 2015.
Trademarks
CHAUVET is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET or Chauvet).
The CHAUVET logo in its entirety including the CHAUVET name and the dotted triangle, and all
other tra
demarks in this manual pertaining to services, products, or marketing statements are
owned or licensed by Chauvet. Any other
product names, logos, brands, company names, and
other trademarks featured or referred to within this document are the property of
their respective
trademark holders.
Copyright Notice
Chauvet owns the content of this User Manual in its entirety, including but not limited to
pictures, logos, trademarks, and resources.
© Copyright 2015 Chauvet. All rights reserved.
Electronically published by Chauvet in the United States of America.
Manual Use
Chauvet authorizes its customers to download and print this manual for professional information
purposes only. Chauvet expressly prohibits the u
sage, copy, storage, distribution, modification,
or
printing of this manual or its content for any other purpose without written consent from
Chauvet.
Document
Printing
For better results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If
using A4 paper (210 x 297 mm), configure your printer to scale the content accordingly.
Intended
Audience
Any person in charge of installing, operating, and/or maintaining this product should completely
read through the guide that shipped with the product, as well as this manual, before
installing,
operating, or maintaining this product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects.
However, Chauvet
assumes no responsibility for any errors or omissions in this document.
Chauvet reserves the right to revise and make changes to the content of this document without
obligation that Chauvet notify any person or company of such revision or changes. This does
not in any way constitute a commitment by Chauvet to make such changes. Chauvet may issue
a revision of this manual or a new edition to incorporate such changes.
Document
Revision
The STRIKE 4 User Manual Rev. 1 is the first edition of this manual. Go to
www.chauvetprofessional.com for the latest version.
Author
Date
Editor
Date
D. Couppe
8/14/15
M. Gregory
8/14/15

Table of Contents
STRIKE 4 User Manual Rev. 1 -i-
Table of Contents
1. Before You Begin......................................................................................................................................1
What Is Included...........................................................................................................................................................1
Claims..........................................................................................................................................................................................1
Manual Conventions ....................................................................................................................................................................1
Symbols.......................................................................................................................................................................................1
Product At A Glance .....................................................................................................................................................2
Safety Notes .................................................................................................................................................................2
Personal Safety............................................................................................................................................................................2
Mounting And Rigging..................................................................................................................................................................2
Power And Wiring ........................................................................................................................................................................2
Operation.....................................................................................................................................................................................2
Expected LED Lifespan................................................................................................................................................2
2. Introduction...............................................................................................................................................3
Description....................................................................................................................................................................3
Features........................................................................................................................................................................3
Overview.......................................................................................................................................................................4
Dimensions...................................................................................................................................................................5
3. Setup..........................................................................................................................................................6
AC Power......................................................................................................................................................................6
AC Plug........................................................................................................................................................................................6
Power Linking ...............................................................................................................................................................6
Fuse Replacement.......................................................................................................................................................................6
DMX Linking..................................................................................................................................................................7
DMX Personalities........................................................................................................................................................................7
Master/Slave Connectivity............................................................................................................................................................7
Mounting.......................................................................................................................................................................8
Orientation ...................................................................................................................................................................................8
Rigging.........................................................................................................................................................................................8
Procedure ....................................................................................................................................................................................8

Table of Contents
-ii- STRIKE 4 User Manual Rev. 1
4. Operation...................................................................................................................................................9
Control Panel Description.............................................................................................................................................9
Control Options............................................................................................................................................................................9
Programming................................................................................................................................................................................9
DMX Personality...........................................................................................................................................................9
DMX Control.................................................................................................................................................................................9
Static Operation..........................................................................................................................................................10
Auto Programs............................................................................................................................................................10
Auto Test....................................................................................................................................................................................10
Master/Slave..............................................................................................................................................................................10
Software Information...................................................................................................................................................10
Temperature ...............................................................................................................................................................10
Backlight .....................................................................................................................................................................10
Dimmer Curves..........................................................................................................................................................................11
Fixture Hours..............................................................................................................................................................................11
LED Frequency..........................................................................................................................................................................11
Fan Control................................................................................................................................................................................11
Menu Map...................................................................................................................................................................12
DMX Values................................................................................................................................................................13
STRIKE 4 Pod Selection for DMX Control..................................................................................................................14
STRIKE 4 Angle Adjustment for DMX Control............................................................................................................14
5. Technical Information.............................................................................................................................15
Product Maintenance..................................................................................................................................................15
6. Technical Specifications.........................................................................................................................16
Returns .......................................................................................................................................................................17
Contact Us...................................................................................................................................................18

Before You Begin
STRIKE 4 User Manual Rev. 1 -1-
1. BEFORE YOU BEGIN
What Is
Included
•STRIKE 4
•Neutrik powerCON power cord
•Warranty Card
•Quick Reference Guide
Claims
Carefully unpack the product immediately and check the box to make sure all the parts are in
the package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from
shipping or show signs of mishandling, notify the carrier immediately, not Chauvet
. Failure to
report damage to the carrier immediately may invalidate your claim. In add
ition, keep the box
and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or
concealed damage, file a claim with Chauvet within 7 days of delivery.
Manual
Conventions
Convention Meaning
1–512
A range of values in the text
50/60
A set of mutually exclusive values in the text
<SET>
A button on the product’s control panel
Settings
A product function or a menu option
MENU>Settings
A sequence of menu options
1–10
A range of menu values from which to choose in a menu
Yes/No
A set of two mutually exclusive menu options in a menu
ON
A unique value to be entered or selected in a menu
Symbols
Symbols
Meaning
Critical installation, configuration, or operation information. Failure to
comply with this information may cause the product not to work,
damage third-party equipment, or cause harm to the operator.
Important installation or configuration information. Failure to comply
with this information may keep the product from working.
Useful information.
The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data
transmission protocol.

Before You Begin
-2- STRIKE 4 User Manual Rev. 1
Product At A
Glance
Use on Dimmer
x
Auto Programs
P
Outdoor Use
x
Auto-Ranging Power
Supply
P
Master/Slave
P
Replaceable Fuse
P
DMX
P
User-Serviceable
x
Safety Notes
Read all the following Safety Notes before working with this product. These notes include
important information about the installation, usage, and maintenance of this product.
This product contains no user-serviceable parts. Any reference to servicing in this User
Manual will only apply to properly trained Chauvet certified technicians. Do not open the
housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this product.
Personal Safety
•Avoid direct eye exposure to the light source while the product is on.
•Always disconnect this product from its power source before servicing.
•Always connect this product to a grounded circuit to avoid the risk of electrocution.
•Do not touch this product’s housing during operation because it may be very hot.
Mounting And
Rigging
•This product is for indoor use only! To prevent risk of fire or shock, do not expose this
product to rain or moisture. (IP20)
•CAUTION: When transferring product from extreme temperature environments, (e.g. cold
truck to warm humid ballroom) condensation may form on the internal electronics of the
product. To avoid causing a failure, allow product to fully acclimate to the surrounding
environment before connecting it to power.
•Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from
adjacent surfaces.
•Make sure there are no flammable materials close to this product while it is operating.
•When hanging this product, always secure to a fastening device using a safety cable.
Power And
Wiring
•Always make sure you are connecting this product to the proper voltage in accordance with
the specifications in this manual or on the product’s specification label.
•To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
•Never connect this product to a dimmer pack or rheostat.
•Never disconnect this product by pulling or tugging on the power cable.
Operation
•Do not operate this product if you see damage on the housing, lenses, or cables. Have the
damaged parts replaced by an authorized technician at once.
•Do not cover the ventilation slots when operating to avoid internal overheating.
•The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at a
higher temperature.
•
In case of a serious operating problem, stop using this product immediately!
In the unlikely event that your Chauvet product may require service, contact Chauvet
Technical Support.
Expected LED
Lifespan
LEDs gradually decline in brightness over time, mostly because of heat. Packaged in clusters,
LEDs exhibit higher operating temperatures than in ideal, single-
LED conditions. For this
reason, using clustered LEDs at their fullest intensity significantly reduces the LEDs’ lifespan.
Under normal conditions, this lifespan can be 40,000 to 50,000 hours. If extending this lifespan
is vital, lower the operating temperature by improving the ventilation around the product and
reducing the ambient temperature to an optimal operating range. In addition, limiting the overall
projection intensity may also help to extend the LEDs’ lifespan.

Introduction
STRIKE 4 User Manual Rev. 1 -3-
2. INTRODUCTION
Description
The STRIKE 4 features four independently focusable 100W chip-on-board LEDs that provide
incredible output and coverage for a wide gamut of production genres. STRIKE 4 features
smooth 16-bit dimming control for those incandescent-
style fades, a series of automated strobe
effects for using the STRIKE 4 a
s an audience blinder, individual manual pan control of each
LED pod and adjustable PWM for using the STRIKE 4 in film and studio locations. STRIKE 4
comes standard with basic and advanced control personalities for flexibility in programming, and
an easy-to-read OLED display for quick onboard adjustments.
Features
•1-, 3-, 4-, or 9-channel LED wash product
•Operating modes:
•1-channel: strobe
•3-channel: intensity, duration, rate, effect, macro
•4-channel: flash 1–8
•9-channel: flash 1–8, auto programs, auto speed, dimmer, strobe
•16-bit dimming control for smooth, perfect fades
•Individual pan of each head to allow for directional adjustment of light output
•Simple and complex DMX channel profiles for programming flexibility
•Easy to use OLED display
•Automated strobing programs for easy programming
•Adjustable Pulse Width Modulation (PWM) control to eliminate flicker on camera

Introduction
-4- STRIKE 4 User Manual Rev. 1
Overview
Front View
Rear View
Side View
Power
In/Out
DMX
In/Out
Top View
Control
Panel
Fuse
Mounting Bracket 1
Mounting Bracket 2
Safety Eye Bolt

Introduction
STRIKE 4 User Manual Rev. 1 -5-
Dimensions
2.95 in
75 mm
8.27 in
210 mm
14.25 in
362 mm
14.25 in
362 mm
5.98 in
152 mm
6.42 in
163 mm

Setup
-6- STRIKE 4 User Manual Rev. 1
3. SETUP
AC Power
Each STRIKE 4 has an auto-ranging power supply that works with an input voltage range of 100
to 240 VAC, 50/60 Hz. To determine the power requirements for each STRIKE 4
, refer to the
label affixed to the product. You can also refer to the Technical Specifications
chart in this
manual.
The listed current rating indicates the maximum current draw during normal operation. For more
information, you may download Sizing Circuit Breakers from the Chauvet website
:
www.chauvetprofessional.com.
•Always connect this product to a protected circuit with an appropriate electrical
ground to avoid the risk of electrocution or fire.
•To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if the
rheostat or dimmer channel serves only as a 0 to 100% switch.
AC Plug
The STRIKE 4 comes with a power input cord terminated with a Neutrik powerCON A connector
on one end and an Edison plug on the other end (U.S. market). If the power
input cord that
came with your product has no plug, or if you need to change the Edison plug, use the table
below to wire the new plug.
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live
Black
Brown
Yellow or Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
Power Linking
The STRIKE 4 supports power linking. You can power link up to 5 products at
120 V; up to 9 at 208 V; or up to 10 at 230 V.
This product comes with a power input cord. Power linking cables are available from Chauvet
for purchase.
Fuse
Replacement
1. Disconnect this product from the power outlet.
2. Using a Phillips-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove the blown fuse and replace with another fuse of the same type and rating
(T 5 A, 250 V).
4. Screw the fuse holder cap back in place and reconnect power.
Make sure to disconnect the product’s power cord before replacing a blown fuse. Always
replace the blown fuse with another of the same type and rating.

Setup
STRIKE 4 User Manual Rev. 1 -7-
DMX Linking
You can link the STRIKE 4 to a DMX controller using a 5-pin DMX connection. If using other
DMX-compatible products with the STRIKE 4
, you can control each individually with a single
DMX controller.
DMX
Personalities
The STRIKE 4 uses a 5-pin DMX data connection for the 1-, 3-, 4- and 9-channel DMX
personalities.
•Refer to the Introduction chapter for a brief description of each DMX personality.
•Refer to the Operation chapter to learn how to configure the STRIKE 4 to work in these
personalities.
•The DMX Values section provides you with detailed information regarding the DMX
personalities.
If you are not familiar with or need more information about DMX standards, Master/Slave
connectivity, or the DMX cables needed to link this product to a DMX controller,
download the DMX Primer from the Chauvet website: www.chauvetprofessional.com.
Master/Slave
Connectivity
The Master/Slave mode allows a single STRIKE 4 (the “master”) to control the actions of one or
more STRIKE 4
products (the “slaves”) without the need of a DMX controller to control the
slaves. Once set and connected, the slaves will operate in unison with
the master. For
instructions on connecting and configuring this product, see Master/Slave Mode.
DO NOT connect a DMX controller to products operating in Master/Slave mode. The DMX
controller signals may interfere with the signals from the master.
If you are not familiar with or need more information about DMX standards, or the DMX
cables needed to link this product to a DMX controller, download the DMX Primer from
the Chauvet website: www.chauvetprofessional.com.

Setup
-8- STRIKE 4 User Manual Rev. 1
Mounting
Before mounting this product, read and follow the Safety Notes. For our CHAUVET
Professional line of mounting clamps, go to http://trusst.com/products/.
Orientation
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this product.
•When selecting an installation location, consider easy access to this product for operation,
programming adjustments, and routine maintenance.
•Make sure to mount this product away from any flammable material as indicated in the
Safety Notes.
•Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
•If hanging this product, make sure that the mounting location can support the product’s
weight. See the Technical Specifications for the weight-bearing requirements of this
product.
•When hanging this product, always secure to a fastening device using a safety cable. For
our CHAUVET Professional line of safety cables, go to http://trusst.com/products/.
Procedure
The STRIKE 4 comes with a 2 position yoke that allows you to attach mounting clamps for
hanging. You must supply your own mounting clamps. Make sure the clamps
are capable of
supporting the weight of this product. Use at least one mounting point per product.
For our
CHAUVET Professional line of mounting clamps, go to http://trusst.com/products/.
Mounting Diagram
Overhead Mounting
Safety Cable
Mounting Clamp

Operation
STRIKE 4 User Manual Rev. 1 -9-
4. OPERATION
Control Panel
Description
Button
Function
<MENU>
Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the currently selected
value in to the current function
<UP>
Navigates upward through the menu list or increases the numeric
value when in a function
<DOWN>
Navigates downward through the menu list or decreases the numeric
value when in a function
Control Options
You can set the STRIKE 4 starting address in the 001–512 DMX range. This enables control of
up to 56 products in the 9-channel personality.
Programming
Refer to the Menu Map to understand the menu options. The menu map shows the main level
and a variable number of programming levels for each option.
•To go to the desired main level, press <MENU> repeatedly until the option shows on the
display. Press <ENTER> to select. This will take you to the first programming level for that
option.
•To select an option or value within the current programming level, press <UP> or <DOWN>
until the option shows on the display. Press <ENTER> to select. In this case, if there is
another programming level, you will see that first option, or you will see the selected value.
•Press <MENU> repeatedly to exit to the previous main level.
DMX
Personality
This setting allows you to choose a particular DMX personality.
1. Go to the DMX Channel main level.
2. Select the desired personality (1 Ch, 3 Ch, 4 Ch, or 9 Ch).
•See the DMX Values section for the highest starting address you can select for each
personality.
•Make sure that the starting addresses on the various products do not overlap due to
the new personality setting.
DMX Control
In this mode, each product will respond to a unique starting address from the DMX controller. All
products with the same starting address will respond in unison.
1. Select a DMX personality as shown in DMX Personality.
2. Go to the DMX Address main level.
3. Select the starting address (001–512).
The highest recommended starting address for each DMX mode is as follows:
DMX Mode DMX Address
1 Ch
512
3 Ch
510
4 Ch
509
9 Ch
504

Operation
-10- STRIKE 4 User Manual Rev. 1
Static Operation
The Static mode allows the user to set the intensity and the strobe frequency from the
control panel without a DMX controller.
1. Go to the Static main level.
2. Select Dimmer.
3. Choose desired intensity (000–255).
4. Select Strobe.
5. Select the desired strobe frequency (000–255).
Auto Programs
Auto programs allow for control of pre-programmed strobe looks without a DMX controller.
1. Go to the Auto Show main level.
2. Select the desired auto program (Auto 0–6).
3. Select Speed.
4. Choose the desired speed value (000–100).
You cannot edit any of the auto programs (Auto 0–6).
Auto Test
This option allows you to test all the LEDs on the STRIKE 4.
1. Go to Information main level.
2. Select Auto > Test.
Master/Slave
The Master/Slave mode allows a group of STRIKE 4s (the slaves) to simultaneously
duplicate the output of another STRIKE 4 (the master) without a DMX controller.
1. Set each of the slaves:
a. Go to the Master/Slave Mode main level.
b. Select Slave.
2. Set the master product:
a. Go to the Master/Slave Mode main level.
b. Select Master.
c. Select an Auto program as explained in Auto Programs or Static program as
explained in Static Operation.
•The master is the one that runs a program whether in Auto Show or Static
mode.
•Do not connect a DMX controller to the products configured for Master/Slave
operation. The DMX controller may interfere with signals from the master
product.
•The master should be the first product in the daisy chain.
Software
Information
This option shows what version of software the STRIKE 4 is running.
1. Go to the Information main level.
2. Select Version and the version number will show on the screen.
Temperature
This option shows the internal temperature of each of the STRIKE 4’s individual pods.
1. Go to the Temperature main level.
2. Select LED 1–4
Backlight
This setting allows you to set the amount of time the backlight on the STRIKE 4 stays on
after the last button is pressed on the control panel.
1. Go to the Back Light main level.
2. Select On (remains on), 10 S (10 seconds), 20 S (20 seconds), or 30 S (30 seconds).
3. Press <ENTER>.

Operation
STRIKE 4 User Manual Rev. 1 -11-
Dimmer Curves
The STRIKE 4 provides four different options to simulate the dimming curve of an
incandescent lighting product.
1. Go to the Dimmer Mode main level.
2. Select a dimmer curve (Off, Dimmer 1, Dimmer 2, or Dimmer 3).
OFF:
The output is proportional (linear) to the Dimmer channel values.
DIM1~3:
The output follows the Dimmer channel values based on the corresponding
dimmer curve, being Dimmer 1 the fastest and Dimmer 3the slowest.
Fixture Hours
This option shows the total amount of hours the STRIKE 4 has been turned on.
1. Go to the Information main level.
2. Select Fixture Hours. (the hours will show on the screen)
LED Frequency
This option changes the Pulse Width Modulation (PWM) frequency of the LEDs on the
STRIKE 4.
1. Go to the LED Frequency main level.
2. Select PWM Frequency (600 Hz, 1200 Hz,2000 Hz,4000 Hz, or 25Khz).
Fan Control
The STRIKE 4 allows you to adjust the fan speed of the product to allow for quiet
operation.
1. Go to the Fan Mode main level.
2. Select Auto or High.

Operation
-12- STRIKE 4 User Manual Rev. 1
Menu Map
Main Level Programming Levels Description
Auto Show
Auto 1–6
Speed
0–100
Automatic programs
Static
Dimmer
0-255
Sets the intensity of the light output
Strobe
Selects the strobe frequency
Dimmer Mode
Off
No dimmer
Dimmer 1–3
Dimming curves Dimmer 1 (fast) to
Dimmer 3 (slow)
Back Light
10S
Turns off display backlight after 10 sec of
inactivity
20S
Turns off display backlight after 20 sec of
inactivity
30S
Turns off display backlight after 30 sec of
inactivity
On
Display backlight always on
Information
Auto
Test
Turns on all LEDs in sequence for testing
Fixture Hours
Shows total product hours
Version
Shows installed software version
DMX Address 001–512
Selects DMX address (highest channel
restricted to personality chosen)
DMX Channel
1 Ch
1-channel: dimmer
3 Ch
3-channel: dimmer H, dimmer L, Strobe
4 Ch
4-channel: pod 1–4
9 Ch
9-channel: pod 1–4, auto programs, dimmer
speed, dimmer H, dimmer L, strobe
Master/Slave Mode
Master
Master mode
Slave
DMX mode (Slave mode)
Fan Mode
Auto
Fan control
High
Temperature
LED1
Individual pod temperature
LED2
LED3
LED4
LED Frequency
600Hz
PWM frequency
1200 Hz
2000 Hz
4000 Hz
25KHz

Operation
STRIKE 4 User Manual Rev. 1 -13-
DMX Values
9 Ch
Channel Function Value Percent/Setting
1
Dimmer H
000ó255
0–100%
2
Dimmer L
000ó255
0–100%
3 Strobe
000ó010
011ó132
133ó255
No function
0–20 Hz (All pods)
0–20 Hz (Random strobe macros)
4
White 1
000ó255
0–100%
5
White 2
000ó255
0–100%
6
White 3
000ó255
0–100%
7
White 4
000ó255
0–100%
8 Auto Programs
000ó010
011ó040
041ó080
081ó120
121ó160
161ó200
201ó240
241ó255
No function
Auto 1
Auto 2
Auto 3
Auto 4
Auto 5
Auto 6
No function
9 Dimmer Speed
000ó010
011ó040
041ó080
081ó120
121ó255
Preset dimmer speed from display menu
Nonlinear dimming curve 1 (fastest)
Nonlinear dimming curve 2
Nonlinear dimming curve 3 (slowest)
Preset dimmer speed from display menu
1 Ch
Channel Function Value Percent/Setting
1
Dimmer H
000ó255
0–100%
3 Ch
Channel
Function
Value
Percent/Setting
1
Dimmer H
000ó255
0–100%
2
Dimmer L
000ó255
0–100%
3 Strobe
000
ó
010
011ó132
133ó255
No function
0–20 Hz (All pods)
0–20 Hz (Random strobe macros)
4 Ch
Channel Function Value Percent/Setting
1
White 1
000ó255
0–100%
2
White 2
000ó255
0–100%
3
White 3
000ó255
0–100%
4
White 4
000ó255
0–100%

Operation
-14- STRIKE 4 User Manual Rev. 1
STRIKE 4 Pod Selection for DMX Control
STRIKE 4 Angle Adjustment for DMX Control
1
3
2
4
-24° to 24°
Adjustment -24° to 24°
Adjustment

Technical Information
STRIKE 4 User Manual Rev. 1 -15-
5. TECHNICAL INFORMATION
Product
Maintenance
To maintain optimum performance and minimize wear, you should clean this product frequently.
Usage and environment are contributing factors in determining the cleaning frequency.
As a rule, clean this product at least twice a month. Dust build-
up reduces light output
performance and can cause overheating. This can lead to reduced light source life and
increased mechanical wear.
To clean your product:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the
external vents.
4. Clean all external surfaces with a mild solution of non-ammonia glass cleaner or isopropyl
alcohol.
5. Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
6. Wipe any dirt or grime to the outside edges of the lens surface.
7. Gently polish the lens surfaces until they are free of haze and lint.
Always dry the external surfaces thoroughly and carefully after cleaning them.
Do not spin the cooling fans while blowing compressed air into them.

Technical Specifications
-16- STRIKE 4 User Manual Rev. 1
6. TECHNICAL SPECIFICATIONS
Dimensions and
Weight Length Width Height Weight
14.2 in (362 mm)
6.4 in (163 mm)
14.2 in (362 mm)
19 lb (8.7 kg)
Note: Dimensions in inches rounded to the nearest decimal digit.
Power
Power Supply Type Range Voltage Selection
Switching (internal)
100–240 VAC, 50/60 Hz
Auto-ranging
Parameter 120 VAC, 60 Hz 230 VAC, 50 Hz
Consumption
301 W
286 W
Current
2.49 A
1.29 A
Power linking current
(products)
13.6 A (5 products)
13.6 A (10 products)
Fuse/Breaker
T 5 A, 250 V
T 5 A, 250 V
Power I/O
U.S./Canada
Worldwide
Power input connector
Neutrik powerCON A
Neutrik powerCON A
Power output connector
Neutrik powerCON B
Neutrik powerCON B
Power cord plug
Edison (U.S.)
Local plug
Light Source
Type Power Lifespan
LED
100 W
50,000 hours
Color Quantity Current
White
4
2.3 A
Photometrics
Parameter
Total
Per Cell
Illuminance @ 5 m
640 lux
165 lux
Beam angle
49°
Field angle
79°
Thermal
Max. External Temperature Cooling System
113 °F (45 °C)
Fan-Assisted Convection
DMX
I/O Connectors Connector Type Channel Range
5-pin XLR
Sockets
1, 3, 4 or 9
Ordering
Product Name Item Code UPC Number
STRIKE 4
03051079
781462214272