Chauvet LED-PAR200B Manual

Appendix
DMX Channel Values
NOTE!
Please read all instructions carefully on fixture DMX control mode and addressing.
DMX channels 2, 3, 4, 5 and 6 functions are determined by the current settings of channel 1. For
example, while Channel 1 is set between 000 and 029 the following conditions will apply;
Channel 2 will control the Red LEDs
Channel 3 will control the Green LEDs
Channel 4 will control the Blue LEDs
Channel 5 will control Strobing
Channel 6 will control the Dimmer
CHANNEL VALUE FUNCTION CH 2 CH 3 CH 4 CH 5 CH 6
000 Ù029 RGB Control Mode Red
000 Ù255 Green 000 Ù255 Blue 000 Ù255 Strobe 000 Ù255
030 Ù059
060 Ù119
Pulse Strobe
Pulse ( 0 <-> 100% )
Pulse ( 100 <-> 0% )
No
Function Speed
000 Ù255
120 Ù149 Color Macro Color Macros See Table 1.1 No
Function
150 Ù179 R,G,B Chase RGB Chase pattern
180 Ù209 Automatic Color Change
210 Ù239 Automatic (Fade) Color Change w fade
Speed
000 Ù255
1
240 Ù255
Sound Activated
Music/Auto switch
must be set to Music
No
Function
No
Function No Function
No
Function
Dimmer
000 Ù255
Table 1.1
MODE CH 2 DESCRIPTION
000 Ù016 Red Music/Auto Switch
Note! Regardless of DMX controller
operated use, when the LED-
PAR200B is set to run in Sound
Activated mode, you should make
sure that all units are properly
switched to Music and that you have
adjusted the rotary dial to optimize the
sound level response of the unit.
SWITCH ROTARY FUNCTION
017 Ù056
Red ( Full ) Green: ( 0% ~ 100% )
057 Ù094
Green (Full Red: ( 100% ~ 0% )
095 Ù096 Green
097 Ù136
Green ( Full ) Blue: ( 0% ~ 100% )
137 Ù174
Blue ( Full ) Green: ( 100% ~ 0% )
175 Ù176 Blue
177 Ù216
Blue ( Full ) Red: ( 0% ~ 100% )
Color
Macro
Ch 1
120 Ù149
217 Ù255
Blue ( Full )
Red ( Full )
Green: ( 0% ~ 100% )
AUTO Adjusts speed of built in
program
MUSIC Adjusts sound sensitivity of
built in Mic.
LED-PAR200B User Manual 10 2007-03-12/17:51