3000 N 29
Ct. Hollywood, FL 33020 U.S.A.
www.chauvetlighting.com
PAR56BUL
PAR56CUL
PAR64BUL
PAR64CUL
Specification:
Size PAR56 14.5” x 10” x 10”
PAR64 16.5” x 10.5” x 10.5”
Weight 4.05 lbs
Lamp PAR56
300PAR56/NSP
300PAR56/MFL
300PAR56/WSP
Q500PAR56/NSP
Q500PAR56/MFL
Q500PAR56/WSP
PAR64
500PAR64/NSP FFR
500PAR64/MFL FFN
500PAR64/WFL FFP
Q500PAR64/NSP FFS
Q500PAR64/MFL
Q500PAR64/WFL
Q1000PAR64/NSP
Q1000PAR64/MFL
Q1000PAR64/WFL
PAR56BUL
PAR56CUL
PAR64BUL
PAR64CUL
Par56 Black
Par56 Polished aluminum “Chrome”
Par64 Black
Par64 Polished aluminum “Chrome”
Includes Octagonal gel frame
Gel frame retaining 4th clip
Lamp retention O ring
A/C Cord with Edison plug
Clutch locking tension knob
Lamp socket
Safety wire screen
The CHAUVET parcan is made from high quality
spun aluminum. It includes a power cable with a
molded Edison plug and a lamp socket. It features a
clutch locking system that enables fast focus and
allows for greater front end loads such as a color
changer. This parcan is equipped with all safety
measures and meets UL standards.
Unpacking Instructions
Immediately upon receiving a fixture, carefully unpack the carton, check the
contents to ensure that all parts are present, and have been received in good
condition. Notify the shipper immediately and retain packing material for
inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the
event that a fixture must be returned to the factory, it is important that the
fixture be returned in the original factory box and packing.
Safety Instructions
•This product is intended for indoor use only!
•Make sure power cord is never crimped or damaged.
•Never disconnect power cord by pulling or tugging on the cord.
•To prevent risk of fire or shock, do not expose fixture to rain or moisture.
Make sure there are no flammable materials close to the unit while
operating.
•The unit must be installed in a location with adequate ventilation, at
least 50cm from adjacent surfaces. Be sure that no ventilation slots are
blocked.
•Always disconnect from power source before servicing or replacing
lamp or fuse. Replace with a lamp suitable for your parcan size as
shown on the list above.
Returns Procedure
Returned merchandise must be sent prepaid and in the original
packing, call tags will not be issued. Package must be clearly
labeled with a Return Merchandise Authorization Number (RA #).
Products returned without an RA # will be refused. Call CHAUVET
and request RA # prior to shipping the fixture. Be prepared to
provide the model number, serial number and a brief description of
the cause for the return. Be sure to properly pack fixture, any
shipping damage resulting from inadequate packaging is the
customer’s responsibility. CHAUVET reserves the right to use its
own discretion to repair or replace product(s). As a suggestion,
proper UPS packing or double-boxing is always a safe method to
use.
Claims
Damage incurred in shipping is the responsibility of the shipper;
therefore the damage must be reported to the carrier upon receipt
of merchandise. It is the customer's responsibility to notify and
submit claims with the shipper in the event that a fixture is damaged
due to shipping. Any other claim for items such as missing
component/part, damage not related to shipping, and concealed
damage, must be made within seven (7) days of receiving
merchandise.
