Chefman RJ05 User manual

Instruction Manual
CHEFMAN 12" ELECTRIC SKILLET
MODEL# RJ05
Before using this unit,please read these instructions
completely.
Save this instruction manual.
1

2. Clean the Skillet plate while still warm after use by using a soft damp
cloth, paper napkin or soft sponge.
3. For excess soiling, after the unit is cool, wash the Skillet
plate with a
soft sponge moistened with a non-
abrasive kitchen cleaner while
flushing with warm water.
4.
After completion of cleaning, completely wipe dry with a soft cloth.
Clean the Skillet after each use.
5. To clean the Temperature Control Probe wipe with a dry soft cloth or
paper napkin.
CAUTIONSAND SUGGESTIONS
1. The Skillet surface is non-stick coated, so be careful in handling.
2. DO NOT use shard metal utensils or knives to cut food on the Skillet
surface.
3. DO NOT place the Temperature Control Probe on the Skillet surface.
it may scratch or damage the surface.
4.
DO NOT use cleansers, nylons or metal brushes on Skillet surface. It
may scratch or damage the surface.
5. When moving the unit, always grip the handles.
6. DO NOT wash the Skillet with the Temperature Control Probe
connected.
7. To season the non-
stick properties of the Skillet surface, apply a light
coat of cooking oil. Repeat periodically to maintain the non-stick
properties.
FOR WARRANTY REDEMPTION:
PLEASE CALL 888-315-8407.
IMPORTANT SAFEGUARDS
When using electrical appliances , basic safety precautions should always be
followed including the following:
1. Read all Instructions.
2. Do not touch hot surfaces. Use handles or knobs.
3. To protect against electric shock do not immerse cord, plugs, or (state
specific part or parts in question) in water or other liquid.
4. Close supervision is necessary when any appliance is used by or near
children.
5. Unplug from outlet when not in use and before cleaning. Allow to cool
before putting on or taking off parts, and before cleaning the appliance.
6. Do not operate any appliance with a damaged cord or plug or after the
appliance
malfunctions, or has been damaged in any manner. Return
appliance to the nearest authorized
service facility for examination, repair
or adjustment.
7. The use of accessory attachments not recommended by the appliance
manufacturer may cause injuries.
8. Do not use outdoors (this item maybe omitted if the product is specifically
designed for outdoor use).
9. Do not let cord hang over edge of table or counter, or touch hot surfaces.
10. Do not place on or near a hot gas or electric burner, or in a heated oven.
11. Extreme caution must be used when moving an appliance containing hot
oil or other hot liquids.
2

5
12. Always attach plug to appliance first, then plug cord in the wall outlet.
To disconnect, turn any control to ²off,² then remove plug from wall outlet.
13. Do not use appliance for other than intended use.
SAVE THESE INSTRUCTIONS
SPECIAL INSTRUCTION
THIS UNIT IS FOR HOUSEHOLD USE ONLY
SHORT POWER SUPPLY CORD INFORMATION
A short power supply cord is provided to reduce the risk of becoming
entangled in or tripping over a long cord. Extension cords may be used if
care is exercised in their use. If an extension cord is used, the marked
electrical rating of the extension cord should be at least as great as the
electrical rating of the appliance. The cord should be arranged so that it will
not drape over the countertop or tabletop where it can be pulled on by
children or tripped over unintentionally.
USINGYOUR ELECTRIC SKILLET
Before using for the first time, wash Skillet in warm soapy water, rinse
and dry. DO NOT IMMERSE the UNIT in any liquid. DO NOT
IMMERSE the Temperature Control probe or let the probe come in
contact with any liquid.
1. Make sure Temperature Dial is set to the “Min
” Position .insert the
Temperature Control Probe into the Skillet so the two terminal pins on
the Skillet are fully inserted into the probe. if the Temperature Control
Probe is not completely inserted , abnor
mal heating may occur, resulting
in accident or damage.
2. Plug the cord in a 230 volt,50HZ AC outlet only.
3. During cooking, the pilot light may cycle on and off indicating the
desired temperature is being maintained.
4. After use, turn the Temperature Dial to the “OFF” position, unplug unit
from outlet and then unplug the Temperature Control Probe from the
Skillet.
CLEANINGYOUR ELECTRIC SKILLET
1. After use, turn the Temperature Dial to the “Min” Position, unplug the
cord from the electrical outlet and remove the Temperature Control
Probe from the Skillet.
NOTE: When removing the plug from the outlet, be sure to grip the plug unit
with your hand instead of gripping the cord.
3 4