Recording operation
Button from left to right, followed by record, play, delete
Recording : Press "record button" and hear the "BI" sound,
and the green light keep on bight
Stop recording:Press "record button" when recording and
heard "BIBI" sound, the green LED light goes out
Note:In the recording process, when the memory is full, you
will hear 'BIBIBIBI" sound, and can not recording operation,
and the LED light will not light up; headset can record up to
250 paragraphs, at least 1 second each paragraph.
Play : Press "play button, " Play the latest recording; press
" play button" again when recording is playing, it will play
the last recording; the green LED lights flash slowly
Stop : Press "the play button" two seconds; stop playing the
recording; the green LED light goes out.
Delete the latest recording:Press "delete button" two seconds,
and will hear the "BI" sound; the green LED light turns off
after flashes one time
Delete all the recordings: Press "delete button" for 4-5
seconds, and will hear the 'BIBIBI' sound; the green LED
lights turns offafter flashes one second
Note: After the headset connecting with the mobile phone
(connected to the computer as the computer's Bluetooth
software vary), when recording is play if the phone is any
action (pressing the phone keys, have a call, listen to the
music, etc.) can lead to play recording interrupted or can not
play the recording, because the mobile phone is the highest
priority. The headset must be open when you use the record
function. Recording time is up to 12 minutes (recording time
can be extended up to 50 minutes).
Bluetooth General function
Turn on:Press the function button for 2 seconds. The indicator
light will flash blue 3 times slowly.
Turn off:Press the function button for 3 seconds. The indicator
light will flash red 3 times slowly.
Voice dialing:Press the function button.
Re-dialing call:Press the decrease volume button for 2 seconds.
Answer the phone:Press the function button.
Refuse the phone:Press the function button for 2 seconds.
End the call or cancel dialing:Press the function button.
Audio transfer between phone and headset:Press the increase
volume button for 2 seconds
Mute/Cancel mute:Press the increase volume and decrease
button at the same time
Important operation notice
Bluetooth paring
Bluetooth paring is professional word for Bluetooth products
use:it makes the Bluetooth devices to wireless connect via simple
operation For example, you have to use the Bluetooth function
built-in mobilephone to search Bluetooth device, ifyou want to
use the mobile and Bluetooth headset, then take the option, pair
and connect by password.
Paring With 1 Phone
a.Turn on both the headset and the phone;
b.Hold the headset's MFB for 7 seconds till its blue and red
indicator lights flash altenately, which means the headset
enter into pairing mode!
c.Activate Bluetooth function of the cell-phone to get into its
searching mode and search for Bluetooth devices (please
refer to the phone's manual for more instruction)
i
I
I
I
