chinavasion CVEC-B38 User manual

Bluetooth Headset user Guide
ITEM#Heedispit
i
:
:
i
I
I
tu
lqf,,
!,
I
tt

Speclficatlons:
Slgnal Output Bluetooth v2.1, Class 2
Standby Time: Up to 180 hours
Gonnections: Up to 2 devices simultaneously
Safety FCC, BOB
Overvlew:
Thank you for purchasing thlg headset. Please double
check the contentE of the packaglng to verify that you have
received all lteme. Be sure the completely read the user
guide before uelng the headset. This headset can be
connected/palred wlth any device that is Bluetooth wireless
technology onabl€d.
Orttlng gt.rt d:
Pleaee fully charge headset after removing it from the
package before beginning the pairing process.
Pairing the Headset:
Pairing is the professional word for the process of
connecting a Bluetooth wlreless technology product to
a Bluetooth wireless technology enabled device. This
process only needs to be completed one time with each
new device.
Pairing to 1 device:
1. Press and hold the multi-function button for about 8
seconds, until the indicator light alternates between blue and
red, indicating that it is in paiiing mode.
2. Activate lhe Bluetooth search feature on your phone,
refer to your phone's manual for further instructions.
3. SelectHeadsetfrom the searched device listing.
4. Enter pin code "0000" 1o confirm and finish pairing. The
headset will flash just blue to indicate completed pairing.
Pairing to 2 devices:
This headset contains a dualJink function for connecting
with 2 mobile phones simultaneously.
1. Pair the first phone following the steps above.
2. Temporarily turn off the first connected phone's Bluetooth
wireless technology function.
3. Pair the second phone using the steps above.
4. Turn offthe headset, and re.turn on the first phones
Bl uetooth wireless technology functlonallty.
5. Re-turn on the headset, and lt wlll re-connect to both
devices automatically. -2-

'.1
General Functions:
Turning On:
Press and hold thd multi-function button for 5 seconds,
indicator light will flash blue 3 times.
NOTE: Forthe first 5 cycles ofturning on the headset, the
headset will beep twice, and then flash blue 5 times, and
then two times.
Turning Off:
Press and hold the multi-function button for 5 seconds, the
headset will beep 3 times, and the indicator light will flash
red 3 times.
Voice Dialing:
Press the multi-function button.
Redialing:
Press the multi-function butlon twice.
Answering/Ending a Call:
Press the multi-function button once.
Mute On/Off:
Press and hold Volume (-) for 2-3 seconds.
"Some functions may or may not work with certain phone modsls. See your
phone's manual for more information.
-3- &.
rG,
Charging The Headset:
This headset includes a built-in Lithium Polymer battery.
To charge the unit:
1. Plug the charger into proper outlet.
2. Plug the unit end of charger into the power outlet of
headset.
3. During charging, the indicator light will turn red. When
charging is complete, the indicator light will shut off or flash
red to alert you that the. headset is fully charged.
NOTE:
* For first time use, make sure to fully charge the headset
at least for 4 hours, or preferably overnight (8-10 hours).
* lf headset has not been used for more than 21 days,
recharge unit for at least 4 hours or preferably overnight
(8-10 hours).
* Do not use the headset during charging.
* Please only use original charger included in the packaging.
* lf indicator light flashes red during usage or while on
standby, the battery is low and you should recharge the unit
as soon as possible.
* Recharge unit only in places at room temperature.
Wearing The Headset:
This headset can be worn according to your preference,
just adjust the microphone,
v
I
t;
it
*
fi
I
,l-
b
1
-4-

t
Troubleshooting:
* Ensure that the headset has enough power, is turned on,
and has successfully been fully paired with the mobile
device.
* Ensure that the Bluetooth function on the phone is enabled.
* Be sure that the range between the headset and mobile
device is less than 32 feet (10 meters), or that there is no
disturbances or electrical devices between the headset and
mobile device.
* Headset indicator light is flashing red: Low battery
* During charging indicator light does not illuminate: Leave
on charger for 20 more minutes and re-check.
* No sound coming from headset: 1. Make sure headset is
turned on, 2. Make sure headset was fully paired, 3. Make
sure distance between headset and device is less than 32
feet.
Headset Storage:
* Only use original included accessories with this device.
* Do not disassemble headset. lt will void the warranty.
* Store headset away from dust, heat, and water.
* Use clean, soft, static-free cloth to clean headset surfaces.
* Do not allow children to play or use headset.
* Do not store headset or chargers in extreme environments.
i?
*-
el
iG
-