Christopher Ward C8 Flyer Quartz User guide

C8 Flyer Quartz
Owner’s handbook

1
Your Christopher Ward watch has been designed and
engineered by highly talented craftspeople to ensure
not only accurate and precise timekeeping but also
to bring a real pride of ownership that only items of
the highest quality can ever hope to deliver.
You have made an investment, a good one,
and the aim of this handbook is to help you
make the most of that investment during what
I hope will be a lifetime of ownership.
Christopher Ward
Time on your side...
Introduction
Contents
C8 Flyer Quartz 2–3
Technical information 4–5
How to operate your C8 Flyer Quartz 6–10
Our watch care programme 11
Keeping in touch 12

2
C8 Flyer Quartz
C8 Flyer Quartz
A welcome addition to our C8 range, the Flyer
Quartz adds a welcome element of choice to
those who prefer their aviation watch with
the guaranteed timekeeping of quartz. In a
way, the C8 is a rather appropriate analogy
for the philosophy of Christopher Ward as a
brand: British and Swiss elements coalesce
into a seamless whole, whilst also celebrating
the strengths of each.
The best of Swiss engineering is present in the C8
Flyer Quartz. Inside, a gold-plated Ronda 715 has a
tolerance of -10/+20 seconds per month, while its
potential 60 month battery life can be extended
further. Keeping the crown pulled out when not being
worn reduces consumption by 70%.
But it is the dial that warrants the closest attention,
with depth and texture used to optimum eect.
Inspired by the Smiths Mk II clock found inside the
Spitre – an icon of British aeronautics, and used for
night and daytime operations – legibility is a crucial
aspect of the Quartz’s design. Raised numerals at
6 and 12 o’clock are complemented by cutaway
batons to reveal a SuperLuminova®-covered sandwich
dial beneath, while an anti-reective crystal ensures
legibility in all conditions.
Sharing an aesthetic with the remainder of our aviation
collection, the Quartz is an aviation watch for those
who see beyond the B-Uhr designs that dominate
the market. There may be a Swiss movement inside,
but this is a watch with a distinctly British heart.

3

4
C8 Flyer Quartz
Features
– Swiss made
– 5 jewel quartz movement
– Power saving mechanism
– Steel or DLC (diamond-like carbon) case
– Multi-layered dial with lume-dipped hands
– Anti-reflective flat sapphire crystal
– SuperLuminova®numerals and indices
– Screw-down backplate deep-stamped with
Farnborough wind tunnel design
– Push-down crown with deep-stamped ‘Flyer’ motif
– Whip stitch Tiber leather strap with CW motif clasp
Technical information
Technical
Diameter: 44mm
Height: 11.25mm
Weight: 72g
Calibre: Ronda 715.2
Case: 316L stainless steel
Water Resistance: 5 ATM (50 metres)
Vibrations: , per hour (Hz)
Timing tolerance: -/20 secs per month
Lug to lug: 53.2mm
Strap: 22mm

5

6
How to operate your C8 Flyer Quartz
Setting the time/date
12 3
1. Crown position
2. Date setting
3. Time setting

7
How to operate your C8 Flyer Quartz
7
The crown should sit ush to the case (position
1 )
in order to maintain water resistance.
• For rapid date correction pull gently into
position
2 and turn in a clockwise direction.
• For setting the time pull gently into position
3
and turn anti-clockwise to advance the time.
For precise time setting it is recommended
to pass beyond the desired minute and to set
the hand backwards.
• Push the crown back to position
1 .
Power saving mode
• Pull the crown gently into position 3 to
stop the watch and activate the power
saving mechanism which will reduce
battery consumption by 70%. If the watch
is going to remain in the power saving mode
for some time please ensure it is in a safe
moisture free environment.
PLEASE NOTE: Date correction should not be
carried out between 20.00 hr and 02.00 hr
as the watch gearing will already be aligning
itself to change the date. The crown should
always be pushed in after adjustment,
and it is best to do so from position 3 to
avoid advancing beyond the desired date.

8
How to operate your C8 Flyer Quartz
Using the quick-release pins on your strap
1. Locate the quick-release pin on your strap.
Pull the pin to the side to detach your strap.
2. To reattach your strap, align the pins to the
lug holes and click the strap into position.
Repeat for the other side.

99