Cimon CM1-EP01A User manual

www.cimon.com
Expansion Module
CM1-EP01A
CM1-EP03A
CM1-EP02A

MEMO
Caution
To use this product safely please read the following
instructions
The power must be off whenever you are in contact with the product.
Read and understand the following technical information about the
product.
For your safety only a qualied electrician should work on this product.
1.
2.
3.

Model Specication
CM1-EP01A 10Mbps, Ethernet, 1Port Hub
CM1-EP02A 10Mbps, Ethernet, 2Port Hub
CM1-EP03A 10Mbps, CPU Redundancy, 3Port Hub
General Specifications Features
Wiring
Items Specication Standards
Ambient Temp.
-10°C~70°C -
Storage Temp.
-25°C~80°C -
Ambient Humidity
5~95%RH, (Non-condensing) -
Storage Humidity
5~95%RH, (Non-condensing) -
Vibration
For discontinuous vibration
IEC 61131-2
Frequency Acceleration Amplitude Times
10≤f<57Hz - 0.075mm
X,Y,Z
Each direction,
10 times
57≤f≤150Hz 9.8m/s2{1G} -
Contionuous vibration
Frequency Acceleration Amplitude
10≤f<57Hz - 0.035mm
57≤f≤150Hz 4.9m/s2{1G} -
Shocks
· Max. impact acceleration: 147m/S
2
(15G)
· Authorized time : 11ms
· Pulse wave : Sign half-wave pulse (3 times each in X, Y, Z)
IEC 61131-2
Noise
Square wave
impulse noise ± 2,000V
CIMON standard
Electrostatic
discharge Voltage : 4kV (contact discharging)
IEC 61131-2
IEC 1000-2
Radiated
electromagnetic
eld noise
27~500 MHz,10V/m
IEC 61131-2
IEC 1000-4-3
Fast Transient
Burst noise
Power
module
Digital I/O
(24V or more)
Digital I/O(less
than 24V)
Analog I/O
Comm. interface
IEC 61131-2
IEC 1000-4-4
2 kV 2 kV 0.25 kV
Voltage 2 kV/1min 0.5 kV/1min
Ambient
conditions
No corrosive gas or dust
Cooling type
Natural air cooling
► Maximum 16 expansion Bases
►10BASE-T(10Mbps) communication speed
► Network Repeater built-in
► Remote I/O can be installed.
► Distance between Expansion base(Segments) : Maximum 100m
► Total expansion distance : 1,600m
1 0
1 8

Expansion Configuration Expansion Configuration
► Setting for Expansion
1. Open CICON and click “PLC Parameter” at Project Window.
2. Click “Enable” and select number of expansion bases at the “Expansion”.
(If number of Expansion base is smaller than setting number, it could be error.)
► After connection from Local Base to Expansion Base, select the number of Base
in sequence.
● Slot number of “FROM” and “TO” command
Slot number starts from “0”.
●Format : h + [Base No.]+[Slot No.]
h – Hexadecimal number
Base No. - Hexadecimal number 2 Characters
Slot No. - Hexadecimal number 2 Characters
●Example)
The module number is counted continually from previous base.
Local
Expansion No.1
Slot No.0 Slot No.11
Expansion No.16
No. of BASE Rotary Switch No. of BASE Rotary Switch
Expansion No. 1 0 Expansion No. 9 8
Expansion No. 2 1 Expansion No. 10 9
Expansion No. 3 2 Expansion No. 11 A
Expansion No. 4 3 Expansion No. 12 B
Expansion No. 5 4 Expansion No. 13 C
Expansion No. 6 5 Expansion No. 14 D
Expansion No. 7 6 Expansion No. 15 E
Expansion No. 8 7 Expansion No. 16 F
No. of BASE Slot Format
Local Base Slot No. 5 H0005 or 5
Expansion No.1 Slot No. 0 H0100
Expansion No.2 Slot No. 3 H0203
Expansion No.9 Slot No. 8 H0908
Expansion No.10 Slot No. 9 H0A09
Expansion No.15 Slot No. 10 H0F0A
Expansion No.16 Slot No. 11 H100B

Case of Expansion Modules Dimension
CM1-EP01A CM1-EP02A CM1-EP03A Unit : mm

Revision History
Version Date Content Page
V1.0 2013-09-16 New version -
Product Warranty
January 2014
All Cimon products including hardware, software, and rmware (collectively called
“Products”) carry a one-year warranty against defects in materials and workmanship
beginning from the date of product receipt from seller or its appointed distributor. If a
product proves defective in materials and workmanship within one year from the date
of purchase, we will replace or repair it. Products returned under warranty after
30 days may be replaced with refurbished or remanufactured goods at Cimon’s
discretion. Cimon makes no representation or warranty, express or implied,
that the operation of the Products will be uninterrupted or error free, or that the
functions contained therein will meet or satisfy buyer’s intended use or requirements.
Repaired or replaced Products provided as a result of this warranty are
warranted for a period of six (6) months from the shipment to buyer or the
remainder of the original warranty term for that particular product, whichever
is longer. Cimon’s standard policy is that all customers are responsible for freight
charges to Cimon when returning products under the warranty return policy.
This warranty will be void if Products date codes or serial numbers are removed or
defaced. Warranties do not apply to products that have been subjected to abnormal
use, abnormal conditions, improper storage, exposure to moisture or dampness,
unauthorized modications, unauthorized repair, misuse, neglect, accident, alteration,
improper installation or other acts which are not the fault of Cimon, including damage
caused in shipping. Our warranty also does not apply to any product that has
been damaged by external causes such as re, ood, sand, dirt, lightning, acts of
God, battery leakage, theft, blown fuses, improper use of any electrical source or
connection to product not recommended in writing for interconnection by Cimon.
In no event will Cimon be liable, whether in contract, tort or under any other legal
theory, for lost profits or revenues, loss of use or similar economic loss, for any
indirect, special, incidental, consequential, punitive or similar damages arising out
of or in connection with any products including non-conforming products, or for any
third party claims against you relating to the products, even if we have been advised of
the possibility of such claim. In no event will our monetary liability in respect of any
product exceed the purchase price that you paid for it.

Product Warranty
To minimize the risk of potential safety problems, you should follow all applicable
local and national codes that regulate the installation and operation of your
equipment. These codes vary from area to are and usually change with time. It is your
responsibility to determine which codes should be followed, and to verify that the
equipment, installation and operation is in compliance with the latest revision of these
codes.
CIMON SOFTWARE AND HARDWARE (COLLECTIVELY REFFERED TO AS,
“PRODUCTS”) LICENSE DISCLAIMER AND LIMITATION OF WARRANTIES
YOUR USE OF ANY CIMON PRODUCTS AND CONTENT ACCESSIBLE THROUGH
THE PRODUCTS IS ENTIRELY AT YOUR OWN RISK. EXCEPT AS DESCRIBED IN THIS
AGREEMENT, THE PRODUCTS ARE PROVIDED "AS IS." TO THE MAXIMUM EXTENT
PERMITTED BY APPLICABLE LAW, CIMON, ITS AFFILIATES, AND ITS THIRD PARTY
SERVICE OR DATA PROVIDERS, LICENSORS, DISTRIBUTORS OR SUPPLIERS
(COLLECTIVELY REFERRED TO AS, "SUPPLIERS") DISCLAIM ALL WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY THAT THE PRODUCTS ARE
FIT FOR A PARTICULAR PURPOSE, TITLE, MERCHANTABILITY, DATA LOSS, NON-
INTERFERENCE WITH OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY
RIGHTS, OR THE ACCURACY, RELIABILITY, QUALITY OR CONTENT IN OR LINKED TO
THE PRODUCTS.
CIMON AND ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT THE
PRODUCTS ARE SECURE, FREE FROM BUGS, VIRUSES, INTERRUPTION, ERRORS,
THEFT OR DESTRUCTION. FURTHER, CIMON DOES NOT WARRANT ACCESS TO
THE INTERNET OR TO ANY OTHER SERVICE, CONTENT OR DATA TRANSMITTED
THROUGH THE PRODUCTS. IF THE EXCLUSIONS FOR IMPLIED WARRANTIES DO
NOT APPLY TO YOU, ANY IMPLIED WARRANTIES ARE LIMITED TO 60 DAYS FROM
THE DATE OF PURCHASE OR DELIVERY OF THE PRODUCTS, WHICHEVER IS
SOONER.
EQUIPMENT DAMAGE OR SERIOUS INJURY TO PERSONNEL INCLUDING DEATH
CAN RESULT FROM THE FAILURE TO FOLLOW ALL APPLICABLE CODES AND
STANDARDS INCLUDING ENGINEERING STANDARDS. CIMON DOES NOT
ASSUME ANY RESPONSIBILITY FOR YOUR PRODUCT DESIGN, INSTALLATION OR
OPERATION.
Product Warranty
CIMON LTD AND ITS AFFILIATES AND SUPPLIERS DISCLAIM ANY REP-
RESENTATIONS OR WARRANTIES THAT YOUR USE OF THE PRODUCTS WILL
SATISFY OR ENSURE COMPLIANCE WITH ANY LEGAL OBLIGATIONS OR LAWS OR
REGULATIONS.
LIMITATION OF LIABILITY AND INDEMNITY. TO THE MAXIMUM EXTENT PERMITTED
BY APPLICABLE LAW, THE ENTIRE LIABILITY OF CIMON, AND ITS AFFILIATES
AND SUPPLIERS FOR ALL MATTERS OR CLAIMS RELATING TO THIS AGREEMENT
SHALL BE LIMITED TO THE AMOUNT YOU PAID FOR THE PRODUCTS DURING THE
TWELVE (12) MONTHS PRIOR TO SUCH CLAIM.
THE STATUTE OF LIMITATIONS FOR FILING A CLAIM SHALL BE LIMITED TO THE
SHORTER OF TWELVE MONTHS, OR THE SHORTEST PERIOD ALLOWED UNDER
APPLICABLE LAW.
SUBJECT TO APPLICABLE LAW, CIMON AND ITS AFFILIATES AND SUPPLIERS ARE
NOT LIABLE FOR ANY OF THE FOLLOWING: (A) INDIRECT, SPECIAL, INCIDENTAL,
PUNITIVE OR CONSEQUENTIAL DAMAGES; (B) DAMAGES RELATING TO FAILURES
OF TELECOMMUNICATIONS, THE INTERNET, ELECTRONIC COMMUNICATIONS,
CORRUPTION, SECURITY, LOSS OR THEFT OF DATA, VIRUSES, SPYWARE, LOSS
OF BUSINESS, REVENUE, PROFITS OR INVESTMENT, OR USE OF SOFTWARE
OR HARDWARE THAT DOES NOT MEET CIMON SYSTEM REQUIREMENTS. THE
ABOVE LIMITATIONS APPLY EVEN IF CIMON AND ITS AFFILIATES AND SUPPLIERS
HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES AND/OR THE
POSSIBILITY OF DAMAGES GREATER THAN THE LIMITATION ABOVE. THIS
AGREEMENT SETS FORTH THE ENTIRE LIABILITY OF CIMON, ITS AFFILIATES AND
YOUR EXCLUSIVE REMEDY WITH RESPECT TO THE SOFTWARE AND ITS USE.
THE PARTIES FURTHER AGREE THAT THE APPLICABLE LAW AND VENUE FOR
ANY DISPUTED ARE THE LAWS OF CALIFORNIA. TO THE EXTENT ALLOWED BY
APPLICABLE LAW, ANY CLAIMS SHALL BE BROUGHT IN LOS ANGELES CALIFORNIA
AND CALIFORNIA LAW SHALL APPLY. THE CALIFORNIA VERSION OF THE UCC IS
THE PREFERRED LAW TO BE APPLIED TO ANY WARRANT AND RELATED CLAIMS.

MEMO MEMO

Version : 1.0
Revision Date : Sep, 2013
Printed : Jul, 2014
BCP18051
H.Q Address :
5F KDT B/D, #48, Beolmal-ro, Bundang-gu,Seongnam-si, GyeongGi-do, Korea
463-836
Tel : +82-31-778-3071
Homepage :
www.cimon.com
CIMON CO.,LTD.
USA :
3699 Wilshire Blvd suite 1250 Los Angeles CA90010
Tel : 213 384-8703
Homepage :
www.cimon.com
Other manuals for CM1-EP01A
1
This manual suits for next models
2
Table of contents
Other Cimon Controllers manuals
Popular Controllers manuals by other brands

hager
hager HZI855 instruction manual

Telenot
Telenot B&B F6 operating instructions

VAT
VAT LINVAT 070 Series Installation, operating, & maintenance instructions

Siemens
Siemens Acvatix SAS Series Basic documentation

gefran
gefran SIEIDrive ADV100 Functions description and parameters list

Reflex
Reflex Reflexomat RS 90/1 operating manual