CipherLab 256 Series User manual

www.cipherlab.com
Wall-Mount Installation
256x 

Copyright ©2016 CipherLab Co., Ltd. P/N S25CRAQG31006
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
4.7 mm
181 mm 2.5 mm
 。
。
   ，  . 。
 。
， 。
，。。
 
   ，  。

。
， 。
，。。
4.7 mm
2 2 7 8mm
181 mm 2 2.5 mm 2 7.8mm
180
180
：
：
2.5 mm/：7.8 mm
2.5 mm/：7.8 mm
：
：
4.7 mm
4.7 mm
181 mm
M5 ( )
()



 
M2.6
M2.6

 GoBetween ：http://ccs.cipherlab.com
  ：GoBetween  http://ccs.cipherlab.com


www.cipherlab.com
Wall-Mount Installation
256x Series BT Base
Quick Start Guide
Copyright ©2016 CipherLab Co., Ltd. P/N S25CRAQG31006
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Drill one upper hole 4.7 mm in diameter on the wall.
181 mm down below the upper hole, drill two lower holes (spaced 7.8 mm apart) 2.5 mm in
diameter on the wall.
Then secure the provided screws and wall mounting clip to the holes respectively.
Get the scanner hook out of the BT base. Turn it upside down and put it back.
Align the BT base bottom slot with the mounting clip which can slide into the slot.
Mount the base by sliding it downwards the clip. Then hang the BT base on the upper screw.
Download the user manual and CD contents using GoBetween, available at
.http://ccs.cipherlab.com
Diameter: 2.5 mm
Spaced away: 7.8 mm
Diameter: 4.7 mm
181 mm
M5 (upper screw)
Mounting clip and M2.6 screws
Scanner
hook

www.cipherlab.com
Wall-Mount Installation
256x 

Copyright ©2016 CipherLab Co., Ltd. P/N S25CRAQG31006
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
4.7 mm
181 mm 2.5 mm
 。
。
   ，  . 。
 。
， 。
，。。
 
   ，  。

。
， 。
，。。
4.7 mm
2 2 7 8mm
181 mm 2 2.5 mm 2 7.8mm
180
180
：
：
2.5 mm/：7.8 mm
2.5 mm/：7.8 mm
：
：
4.7 mm
4.7 mm
181 mm
M5 ( )
()



 
M2.6
M2.6

 GoBetween ：http://ccs.cipherlab.com
  ：GoBetween  http://ccs.cipherlab.com


www.cipherlab.com
Wall-Mount Installation
256x Series BT Base
Quick Start Guide
Copyright ©2016 CipherLab Co., Ltd. P/N S25CRAQG31006
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Drill one upper hole 4.7 mm in diameter on the wall.
181 mm down below the upper hole, drill two lower holes (spaced 7.8 mm apart) 2.5 mm in
diameter on the wall.
Then secure the provided screws and wall mounting clip to the holes respectively.
Get the scanner hook out of the BT base. Turn it upside down and put it back.
Align the BT base bottom slot with the mounting clip which can slide into the slot.
Mount the base by sliding it downwards the clip. Then hang the BT base on the upper screw.
Download the user manual and CD contents using GoBetween, available at
.http://ccs.cipherlab.com
Diameter: 2.5 mm
Spaced away: 7.8 mm
Diameter: 4.7 mm
181 mm
M5 (upper screw)
Mounting clip and M2.6 screws
Scanner
hook