Cisco IOS Router User manual

Cisco Systems
Cisco IOS Router
RSA SecurID Ready Implementation Guide
Last Modified: March 31, 2008
Partner Information
Product Information
Partner Name Cisco Systems
Web Site www.cisco.com
Product Name Cisco IOS Router
Version & Platform 12.4(3)
Product Description Cisco IOS IPsec functionality provides network data encryption at the IP
packet level, offering a robust, standards-based, security solution. IPsec
provides data authentication and anti-replay services, in addition to data
confidentiality services. It is the only way to implement secure VPNs.
Customers can combine IPsec with other Cisco IOS Software functionality
to build scalable, robust, and secure Quality of Service-aware VPNs.
Product Category Perimeter Defense (Firewalls, VPNs & Intrusion Detection)

Solution Summary
The Cisco IOS software, combines IPSec VPN enhancements with robust firewall, intrusion detection,
and secure administration capabilities. The VPN provides users with a complete implementation of IPSec
standards, including support for DES and Triple DES encryption, and authentication through RSA
SecurID authentication via RADIUS.
Partner Integration Overview
Authentication Methods Supported RADIUS
List Library Version Used N/A
RSA Authentication Manager Name Locking N/A
RSA Authentication Manager Replica Support N/A
Secondary RADIUS Server Support Yes/ (hardware dependent for number of servers)
Location of Node Secret on Agent None stored
RSA Authentication Agent Host Type Communication Server
RSA SecurID User Specification Designated Users, All Users, Default Method
RSA SecurID Protection of Administrative Users Yes
RSA Software Token API Integration No
Use of Cached Domain Credentials No
2

Product Requirements
Partner Product Requirements: Cisco IOS Router
Firmware Version 12.4(3)
Additional Software Requirements
Application Additional Patches
Cisco Secure VPN Client 4.6
Important: If you are configuring the IOS Router to use IPSec you will
also need to configure the Cisco VPN client. Information on how to
configure the Cisco VPN client can be found in the Cisco VPN client
implementation guide located at:
http://rsasecurity.agora.com/rsasecured/guides/imp_pdfs/Cisco_VP
N_Client_AuthMan61.pdf .
3

Agent Host Configuration
To facilitate communication between the Cisco IOS Router and the RSA Authentication Manager / RSA
SecurID Appliance, an Agent Host record must be added to the RSA Authentication Manager database
and RADIUS Server database. The Agent Host record identifies the Cisco IOS Router within its database
and contains information about communication and encryption.
To create the Agent Host record, you will need the following information.
•Hostname
•IP Addresses for all network interfaces
•RADIUS Secret, which must match the RADIUS Secret on the Cisco IOS VPN Router.
When adding the Agent Host Record, you should configure the Cisco IOS Router as a Communication
Server. This setting is used by the RSA Authentication Manager to determine how communication with
the Cisco IOS Router will occur.
Note: Hostnames within the RSA Authentication Manager / RSA SecurID
Appliance must resolve to valid IP addresses on the local network.
Please refer to the appropriate RSA Security documentation for additional information about Creating,
Modifying and Managing Agent Host records.
4

Partner Authentication Agent Configuration
Before You Begin
This section provides instructions for integrating the partners’ product with RSA SecurID Authentication.
This document is not intended to suggest optimum installations or configurations.
It is assumed that the reader has both working knowledge of all products involved, and the ability to
perform the tasks outlined in this section. Administrators should have access to the product
documentation for all products in order to install the required components.
All vendor products/components must be installed and working prior to the integration. Perform the
necessary tests to confirm that this is true before proceeding.
Cisco configuration:
Log onto the Cisco remote access server and enter enable mode, by typing the word “enable” and giving
the enable password. Then enter configuration mode by typing “config t”. You are now able to enter the
commands below to turn on authentication. To turn off one of the commands put the word “no” in front of
the command line and you will turn off that line.
Note: For remote access use the Cisco IOS Routers configuration
section.. For VPN access use the Cisco IOS VPN Router section.
Cisco IOS Routers
Note: CHAP authentication is not supported when using RSA SecurID
authentication.
Tacacs+ commands
aaa new-model
aaa authentication login default tacacs+ line enable
aaa authentication ppp default tacacs+
tacacs-server host xxx.xxx.xxx.xxx
tacacs-server timeout 120
tacacs-server key “your key”
RADIUS commands
aaa new-model
aaa authentication login default radius line enable
aaa authentication ppp default radius
radius-server host xxx.xxx.xxx.xxx auth-port 1645 acct-port 1646 key “your key”
radius-server timeout 120
5

Cisco IOS VPN Router
RADIUS configuration:
aaa new-model
aaa authentication login userauthen group radius local
aaa authorization network groupauthor local
radius-server host xxx.xxx.xxx.xxx auth-port 1645 acct-port 1646
radius-server timeout 120
radius-server key “your key”
VPN Policy:
crypto isakmp policy 3
encr 3des
authentication pre-share
group 2
crypto isakmp client configuration group vpngroup (“vpngroup” Must match the
group name set in the vpn client)
key password (“password” Must match password set in the vpn client)
pool vpnpool (“vpnpool” is the name of an ip pool created on the router)
crypto ipsec transform-set myset esp-3des esp-sha-hmac
crypto dynamic-map dymap 10
set transform-set myset
crypto map clientmap client authentication list userauthen
crypto map clientmap isakmp authorization list groupauthor
crypto map clientmap client configuration address respond
crypto map clientmap 10 ipsec-isakmp dynamic dymap
Interface configuration:
Apply the crypto map to the appropriate interface.
interface Ethernet1/0
description connected to EthernatLAN
crypto map clientmap
The VPN Policy is an example only. You may need to make changes to it to
fit your needs. For example the encr command could be set to encr aes
256.
6

Certification Checklist: For RSA Authentication Manager 6.x
Cisco Router
Date Tested: September 29, 2005
Certification Environment
Product Name Version Information Operating System
RSA Authentication Manager 6.1 Windows 2003
Cisco IOS VPN Router 12.4(3) IOS
Mandatory Functionality
RSA Native Protocol RADIUS Protocol
New PIN Mode
Force Authentication After New PIN N/A Force Authentication After New PIN
System Generated PIN N/A System Generated PIN
User Defined (4-8 Alphanumeric) N/A User Defined (4-8 Alphanumeric)
User Defined (5-7 Numeric) N/A User Defined (5-7 Numeric)
User Selectable N/A User Selectable
Deny 4 and 8 Digit PIN N/A Deny 4 and 8 Digit PIN
Deny Alphanumeric PIN N/A Deny Alphanumeric PIN
PASSCODE
16 Digit PASSCODE N/A 16 Digit PASSCODE
4 Digit Password N/A 4 Digit Password
Next Tokencode Mode
Next Tokencode Mode N/A Next Tokencode Mode
Load Balancing / Reliability Testing
Failover (3-10 Replicas) N/A Failover
Name Locking Enabled N/A Name Locking Enabled
No RSA Authentication Manager N/A No RSA Authentication Manager
Additional Functionality
RSA Software Token API Functionality
System Generated PIN N/A System Generated PIN N/A
User Defined (8 Digit Numeric) N/A User Defined (8 Digit Numeric) N/A
User Selectable N/A User Selectable N/A
Next Tokencode Mode N/A Next Tokencode Mode N/A
Domain Credential Functionality
Determine Cached Credential State N/A Determine Cached Credential State
Set Domain Credential N/A Set Domain Credential
Retrieve Domain Credential N/A Retrieve Domain Credential
BSD/SWA = Pass = Fail N/A = Non-Available Function
7

Certification Checklist: For RSA Authentication Manager 6.x
VPN
Date Tested: September 29, 2005
Certification Environment
Product Name Version Information Operating System
RSA Authentication Manager 6.1 Windows 2003
Cisco IOS VPN Router 12.4(3) IOS
Cisco Secure VPN Client 4.6 Windows 2003
Mandatory Functionality
RSA Native Protocol RADIUS Protocol
New PIN Mode
Force Authentication After New PIN N/A Force Authentication After New PIN
System Generated PIN N/A System Generated PIN
User Defined (4-8 Alphanumeric) N/A User Defined (4-8 Alphanumeric)
User Defined (5-7 Numeric) N/A User Defined (5-7 Numeric)
User Selectable N/A User Selectable
Deny 4 and 8 Digit PIN N/A Deny 4 and 8 Digit PIN
Deny Alphanumeric PIN N/A Deny Alphanumeric PIN
PASSCODE
16 Digit PASSCODE N/A 16 Digit PASSCODE
4 Digit Password N/A 4 Digit Password
Next Tokencode Mode
Next Tokencode Mode N/A Next Tokencode Mode
Load Balancing / Reliability Testing
Failover (3-10 Replicas) N/A Failover
Name Locking Enabled N/A Name Locking Enabled
No RSA Authentication Manager N/A No RSA Authentication Manager
Additional Functionality
RSA Software Token API Functionality
System Generated PIN N/A System Generated PIN N/A
User Defined (8 Digit Numeric) N/A User Defined (8 Digit Numeric) N/A
User Selectable N/A User Selectable N/A
Next Tokencode Mode N/A Next Tokencode Mode N/A
Domain Credential Functionality
Determine Cached Credential State N/A Determine Cached Credential State
Set Domain Credential N/A Set Domain Credential
Retrieve Domain Credential N/A Retrieve Domain Credential
BSD/SWA = Pass = Fail N/A = Non-Available Function
8

Certification Checklist For RSA Authentication Manager 7.x
Router
Date Tested: March 31, 2008
Certification Environment
Product Name Version Information Operating System
RSA Authentication Manager 7.1 Windows 2003 SP2
RSA RADIUS Server 7.1 Windows 2003 SP2
Cisco IOS VPN Router 12.4(3) IOS
Mandatory Functionality
RSA Native Protocol RADIUS Protocol
New PIN Mode
Force Authentication After New PIN N/A Force Authentication After New PIN
System Generated PIN N/A System Generated PIN
User Defined (4-8 Alphanumeric) N/A User Defined (4-8 Alphanumeric)
User Defined (5-7 Numeric) N/A User Defined (5-7 Numeric)
Deny 4 and 8 Digit PIN N/A Deny 4 and 8 Digit PIN
Deny Alphanumeric PIN N/A Deny Alphanumeric PIN
Deny Numeric PIN N/A Deny Numeric PIN
PIN Reuse PIN Reuse
Passcode
16 Digit Passcode N/A 16 Digit Passcode
4 Digit Fixed Passcode N/A 4 Digit Fixed Passcode
Next Tokencode Mode
Next Tokencode Mode N/A Next Tokencode Mode
Load Balancing / Reliability Testing
Failover (3-10 Replicas) N/A Failover
No RSA Authentication Manager N/A No RSA Authentication Manager
Additional Functionality
RSA Software Token Automation
System Generated PIN N/A System Generated PIN N/A
User Defined (8 Digit Numeric) N/A User Defined (8 Digit Numeric) N/A
Next Tokencode Mode N/A Next Tokencode Mode N/A
RSA SecurID 800 Token Automation
System Generated PIN N/A System Generated PIN N/A
User Defined (8 Digit Numeric) N/A User Defined (8 Digit Numeric) N/A
Next Tokencode Mode N/A Next Tokencode Mode N/A
SWA = Pass = Fail N/A = Non-Available Function
9

Certification Checklist For RSA Authentication Manager 7.x
VPN
Date Tested: March 31, 2008
Certification Environment
Product Name Version Information Operating System
RSA Authentication Manager 7.1 Windows 2003 SP2
RSA RADIUS Server 7.1 Windows 2003 SP2
Cisco IOS VPN Router 12.4(3) IOS
Cisco Secure VPN Client 4.8 Windows XP Professional SP2
Mandatory Functionality
RSA Native Protocol RADIUS Protocol
New PIN Mode
Force Authentication After New PIN N/A Force Authentication After New PIN
System Generated PIN N/A System Generated PIN
User Defined (4-8 Alphanumeric) N/A User Defined (4-8 Alphanumeric)
User Defined (5-7 Numeric) N/A User Defined (5-7 Numeric)
Deny 4 and 8 Digit PIN N/A Deny 4 and 8 Digit PIN
Deny Alphanumeric PIN N/A Deny Alphanumeric PIN
Deny Numeric PIN N/A Deny Numeric PIN
PIN Reuse N/A PIN Reuse
Passcode
16 Digit Passcode N/A 16 Digit Passcode
4 Digit Fixed Passcode N/A 4 Digit Fixed Passcode
Next Tokencode Mode
Next Tokencode Mode N/A Next Tokencode Mode
Load Balancing / Reliability Testing
Failover (3-10 Replicas) N/A Failover
No RSA Authentication Manager N/A No RSA Authentication Manager
Additional Functionality
RSA Software Token Automation
System Generated PIN N/A System Generated PIN N/A
User Defined (8 Digit Numeric) N/A User Defined (8 Digit Numeric) N/A
Next Tokencode Mode N/A Next Tokencode Mode N/A
RSA SecurID 800 Token Automation
System Generated PIN N/A System Generated PIN N/A
User Defined (8 Digit Numeric) N/A User Defined (8 Digit Numeric) N/A
Next Tokencode Mode N/A Next Tokencode Mode N/A
SWA = Pass = Fail N/A = Non-Available Function
10