Citizen CMP-10 Installation manual

Command Reference
MOBILE LINE THERMAL PRINTER
MODEL CMP-10
Rev. 2.00 Revised on June 30, 2003
Citizen CMP-10 command reference ManualCitizen CMP-10 command reference ManualCitizen CMP-10 command reference ManualCitizen CMP-10 command reference Manual

Rev. No. Date Comment
Rev. 1.00 2002/11/15 Newly issued
Rev. 1.01 2002/12/18 Revised P. 1, P. 2, P. 47, P. 54, P. 56, P. 59
Rev. 1.02 2003/01/17 Added Chapter 3 (Character Codes Table) and Chapter 4
Rev. 2.00 2003/06/30 Added ESC >, ESC l, FF (Firmware Ver. 1.95)
Revised GS )
Added Chapter 5 to Chapter 10
REVISION

— 1 —
1. CMP-10 COMMAND SET
Code Command Function Page
1 BEL Sounds the Buzzer 4
2 HT Horizontal Tab Command 5
3 LF Printing and Paper Feed Command 6
4 CR Print one line Command 7
5 ESC RS Sounds the Buzzer 7
6 ESC SP Setting the right space amount of the
character 8
7 ESC ! Collective Specifying Printing Mode 9
8 ESC $ Specifying the Absolute Positions 11
9 ESC % Specifying/Canceling Download Character Set 12
10 ESC & Define user characters 13
11 ESC * Specifying the Bit Image Mode 14
12 ESC + Switch OFF the printer 17
13 ESC – Specifying/ Canceling Underline 17
14 ESC . Printer self test 18
15 ESC 2 Specifying 1/6-inch line feed rate 18
16 ESC 3 Setting line feed rate of minimum pitch 19
17 ESC = Data Input Control 20
18 ESC > Saving current setting 21
19 ESC ? Reading magnetic stripe reader 22
20 ESC @ Initializing the Printer 23
21 ESC D Setting Horizontal Tab Position 24
22 ESC E Specifying/canceling highlighting 25
23 ESC G Specifying/canceling Double Printing 26
24 ESC J Printing and feeding paper n/203 inch 27
25 ESC R Selecting Code table 27
26 ESC S Setting serial interface communication speed 28
27 ESC T Printing Diagnostic information 28
28 ESC V Specifying/Canceling 90°-right- turned
Characters 29
29 ESC Y Specifying print density 30
30 ESC Z Returning diagnostic information 31
31 ESC \ Specifying the relative positions 34
32 ESC _ Setting the printer in default state 34
33 ESC ` Returning the battery voltage and Printer
Head temperature 35
34 ESC a Aligning the characters 36
35 ESC c5 Enabling/Disabling Panel Switches 37
36 ESC d Printing and Feeding the paper by n lines 38
37 ESC v Transmitting the printer status 39
38 ESC x Selecting the time interval for automatically
switching Off the printer 40
39 ESC { Specifying/Canceling the Inverted Characters 41
40 GS ) Setting of printer flags 42
41 GS * Defining the Download Bit Image (LOGO) 43
42 GS / Printing the Download, Bit Image 44
43 GS : Starting/Ending Macro Definition 45
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*

—2 —
Code Command Function Page
44 GS H Selecting of Printing Position of HRI Code 46
45 GS L Setting the left margin 47
46 GS W Setting the print area width 48
47 GS ^ Executing the Macro 49
48 GS a Enabling/Disabling
ASB (Automatic Status Back) 50
49 GS f Selecting the font of HRI characters 53
50 GS h Selecting the height of the Bar Code 54
51 GS k Printing the bar code 55
52 GS w Selecting the horizontal size (Scale factor) of the Bar Code 60
53 ESC l Specify/canceling black mark function 62
54 FF Printing and paper feeding to the black mark position 62
* indicates a unique command or a non-compatible command.

This is a “Table of Contents preview” for quality assurance
The full manual can be found at http://the-checkout-tech.com/estore/catalog/
We also offer free downloads, a free keyboard layout designer, cable diagrams, free help and
support.
http://the-checkout-tech.com : the biggest supplier of cash register and scale manuals on the net