Clarke CAM5002 Installation and operation manual

24” INDUSTRIAL HIGH OUTPUT FAN
MODEL No: CAM5002
Part No: 3231550
OPERATING & MAINTENANCE
INSTRUCTIONS
24” INDUSTRIAL HIGH OUTPUT FAN
0104

CLARKE GUARANTEE
This CLARKE product is guaranteed against faulty manufacture for a period
of 12 months from the date of purchase. Please keep your receipt as proof
of purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.
Faulty goods should be returned to their place of purchase, no product
can be returned to us without prior permission.
This guarantee does not affect your statutory rights.
Please read these instructions carefully before operating the tool
Thank you for purchasing this CLARKE 24” Industrial High Output Fan.
Before using the product, please read this manual thoroughly and carefully follow
all instructions given. This is for your own safety and that of others around you, and
is also to help you achieve long and trouble free service from your new fan.
PARTS & SERVICE TEL: [phone]
or e-mail as follows:
PARTS: [email protected]
SERVICE: [email protected]
Please note that the details and specifications contained herein are correct at the time of going to
print. However CLARKE International reserve the right to change specifications at any time without
prior notice. Always consult the machines data plate
-1-

Specifications
The CAM5002 is designed for use inside ONLY, it has a powerful steel fan with a fully enclosed
250w motor. Its thermal protection is perfect for industrial environments. It has a 360° tilt
range. The fan can be mounted on the ceiling and is supplied with mounting bracket.
NOTE: The CAM5002 cannot be ‘flash tested’ due to components used within the speed control
box.
Model: .................................................................................... CAM5002
Part No: .................................................................................. 3231550
Voltage: .................................................................................. 230vac
Wattage: ................................................................................ 250w
Speeds: ................................................................................... 3
Dimensions (LWH): ................................................................. 735x340x835mm
Weight: ................................................................................... 24Kg
List of Contents
Before commencing assembly, check for damage and or shortages etc, any damage or
shortage should be reported to your Clarke dealer where the fan was originally purchased.
•1 x Fan Assembly
•2 x Rubber Feet With Mounting Brackets
•2 x Moulded Wheels
•1 x Ceiling Mounting Bracket
•3 x M12 Screws
•3 x Ø 12mm Plain Washers
•1 x Handle
Safety Precautions
•DO NOT use in dusty environments.
•DO NOT use in environments with high fumes from chemicals etc.
•DO NOT use as an extractor fan.
•DO NOT use in areas of high humidity/water vapour, i.e. bathrooms etc.
•DO NOT connect fan to ducting system.
Cleaning
•Ensure the fan is switched off, and isolated from the main electrical supply by
removing the plug from the socket.
•Do not use any harmful cleaning agents for cleaning.
•Only use a clean soft dampened cloth, wipe dry after cleaning.
•DO NOT bend the blades.
•The motor bearings are permanently sealed and do not require any additional
lubrication.
-2-

This machine must be wired up in accordance with the following colour code:
BLUE - NEUTRAL
BROWN - LIVE
GREEN/YELLOW - EARTH
•Connect the BLUE coloured cord to the plug terminal marked “N”
•Connect the BROWN coloured cord to the plug terminal marked “L”
•Connect the GREEN/YELLOW coloured cord to the plug terminal marked “E”
If this appliance is fitted with a plug which is moulded on to
the electric cable (i.e. non-rewireable) please note:
1. The plug must be thrown away if it is cut from the
electric cable. There is a danger of electric shock if it
is subsequently inserted into a socket outlet.
2. Never use the plug without the fuse cover fitted.
Fuse Rating
The fuse in the plug must be replaced with one of the same rating (13 amps) and this
replacement must be approved to BS1362.
If in doubt, consult a qualified electrician. Do not attempt any electrical repairs yourself.
Cable Extension
Always use an approved cable extension suitable for the power rating of this tool (see
specifications), the conductor size should also be at least the same size as that on the
machine, or larger. When using a cable reel, always unwind the cable completely.
3. Should you wish to replace a detachable fuse carrier, ensure that the correct
replacement is used (as indicated by marking or colour code).
4. Replacement fuse covers can be obtained from your local dealer or most electrical
stockists.
IMPORTANT:
If a cable extension is needed, it is essential to comply with the following data.
Voltage Extension length Cable section
230v Up to 20m 2.5mm2
230v From 20 to 50m 4 m m 2
This product is provided with a standard 13 amp, 230 volt (50Hz), BS 1363 plug, for
connection to a standard, domestic electrical supply. Should the plug need changing at
any time, ensure that a plug of identical specification is used.
Electrical Connections
WARNING ! THIS APPLIANCE MUST BE EARTHED
-3-

Assembly item numbers in brackets refer to parts list on page 5.
Some assembly is required before using the fan.
Decide first if the fan is to be used on the floor or ceiling mounted.
Floor Mounting
1a Fit handle (item 13) to the fan housing (item 11) using screws x 2 (item 12).
2a Fit wheels x 2 (item 22) to the frame using shoulder screws x 2 (item 20) and washers
x 2 (item 21).
3a Fit feet brackets x 2, (item 27) using screws x 4 (item 28) and washers x 4 (item 29).
4a Fit feet x 2 (item 26) onto brackets using screws x 2 (item 24) and washers x 2 (item
25).
5a Plug in and switch on, adjust the fan speed to suit.
Ceiling Mounting
Choose location for the fan installation, ensuring correct electric supply is available.
1b Use the ceiling mounting plate (item 23) as a template, to mark drilling locations.
2b Drill holes in ceiling to suit suitable fixings, not supplied.
3b Fix the ceiling mounting plate to the ceiling using appropriate fixings, not supplied.
Ensure the mounting plate is secured sufficiently to take the weight of the fan.
4b Attach the fan to the mounting plate using screws supplied, (item 30).
5b Adjust the fan to desired position then tighten all three securing screws.
6b Plug in and switch on, adjust the fan speed to suit.
NOTE: all parts not used for ceiling mounted fans, should be stored safely for use if the fan is
to be floor mounted.
WARNING
NEVER OPERATE THE FAN WITH EITHER FRONT OR REAR GRILLS REMOVED.
Electrical Schematic
Speed Control Switch
-4-

Parts List
Item Part Number Description Qty
1 OT500201 Name plate 1
2 OT500202 Screw M18 x 12 16
3 OT500203 Washer 5mm 16
4 OT500204 Grill 2
5 OT500205 Fan blade 1
6 OT500206 Screw M10 x 13 1
7 OT500207 Motor 1
8 OT500208 Screw M6 x 12 6
9 OT500209 Nut M6 6
10 OT500210 Nut M8 2
11 OT500211 Drum Fan Housing 1
12 OT500212 Screw M6 x 10 2
13 OT500213 Handle 1
14 OT500214 Switch Box 1
15 OT500215 Power Cord & Plug 1
16 OT500216 Screw ST4 x 12 4
17 OT500217 Frame 1
18 OT500218 Shock Absorber 2
19 OT500219 Screw M12 x 35 2
20 OT500220 Screw M12 x 70 2
21 OT500221 Washer 12mm 2
22 OT500222 Wheel 2
23 OT500223 Ceiling Mounting Plate 1
24 OT500224 Screw M5 x 10 2
25 OT500225 Washer 5mm 2
26 OT500226 Foot 2
27 OT500227 Bracket 2
28 OT500228 Screw M6 x 12 4
29 OT500229 Washer 4
30 OT500230 Screw M12 x 20 3
-5-

Parts Diagram
-6-