Claypaky K-EYE K20 HCR User manual

1
INS RUC ION MANUAL
C61430
C61440
ENGLISH
K-EYE K10 HCR
K-EYE K20 HCR
Congratulations on choosing a Claypaky product!
We thank you for your custom.
Please note that this product, as all the others in the rich
Claypaky range, has been designed and made with total quality
to ensure excellent performance and best meet your expectations
and requirements.
INDEX
Page Contents
2 Safety information
3 Unpacking and preparation
4 Installation and start-up
5 Control panel
9 Maintenance
10 Accessories
11 Cause and solution of problems
11 Technical information

2
K-EYE K10 & K20 HCR
SAFE Y INFORMA ION
EN
I
DE
ES
FR
RU
SAFE Y INFORMA ION
IMPORTANT: Claypaky recommends you carefully read and keep the safety information on this product, also
available in digital format at the following link:
www.claypaky.com
Ref: [FIS016 - Safety Information A.leda K-EYE series]
INFORMAZIONI DI SICUREZZA
IMPORTANTE: Claypaky raccomanda di leggere accuratamente e conservare le informazioni di sicurezza relative
a questo prodotto, sempre reperibili in versione digitale al seguente link:
www.claypaky.com
Rif: [FIS016 - Safety Information A.leda K-EYE series]
INFORMA IONEN ZUR SICHERHEI
WIC TIG: Claypaky empfiehlt, die Sicherheitsinformationen bezüglich dieses Produkts genau zu lesen und
aufzubewahren. Sie sind in Digitalversion immer unter folgendem Link auffindbar:
www.claypaky.com
Ref: [FIS016 - Safety Information A.leda K-EYE series]
INFORMACIONES DE SEGURIDAD
IMPORTANTE: Claypaky recomienda leer detenidamente y conservar la información de seguridad relativa a este
producto. Además, está disponible una versión digital de la misma en el siguiente enlace:
www.claypaky.com
Ref: [FIS016 - Safety Information A.leda K-EYE series]
CONSIGNES DE SÉCURI É
IMPORTANT: Claypaky recommande de lire attentivement et de conserver les informations de sécurité relatives à
ce produit, disponibles en version digitale au lien suivant:
www.claypaky.com
Réf. : [FIS016 - Safety Information A.leda K-EYE series]
ИНСТРУКЦИЮ ПО ТЕХНИКЕ БЕЗОПАСНОСТИ
ВАЖНО: Claypaky рекомендует внимательно прочитать и сохранить инструкци по технике безопасности
данного изделия, которая всегда доступна в электронном формате по следу щей ссылке:
www.claypaky.com
Наименование: [FIS016 - Safety Information A.leda K-EYE series]

3
K-EYE K10 & K20 HCR
UNPACKING AND PREPARA ION
45°
45°
45°
45°
45°
90°
90°
90°
90°
UNLOCKED
LOCKED
PAN Mechanism Lock and Release (every 90°) - Fig. 2
IL Mechanism Lock and Release (every 45°) - Fig. 3
2 3
Packing contents - Fig. 1
2 x 183102/805
1

4
K-EYE K10 & K20 HCR
4
1
2
3
2
1
5
INS ALLA ION AND S AR -UP
Connecting and disconnecting power cable - Fig. 5
Installing the projector - Fig. 4
The projector can be installed on the floor resting on special rubber feet, on a truss or on the ceiling or wall.
WARNING: with th xc ption of wh n th proj ctor is position d on th floor, th saf ty cabl must b fitt d. (Cod. 105041/003 availabl on r qu st).
This must b s cur ly fix d to th support structur of th proj ctor and th n conn ct d to th fixing point at th c ntr of th bas .

5
K-EYE K10 & K20 HCR
Switching on the projector - Fig. 8
Press the switch. The projector starts resetting the effects. At the same time, the following information scrolls on the display:
Model Firmware xxx (Fixture ID) System errors
K-EYE HCR Version X.X.X Dmx Address xxx E: .........................
Date - Hour W: .........................
On conclusion of resetting in case of absence of the dmx signal, Pan and Tilt move to the “ ome” position (Pan 128 bit - Tilt 128 bit). The control panel
(Fig. 7) has a display and buttons for the complete programming and management of the projector menu. The display can be in one of two conditions:
rest status and setting status. When it is in the rest status, the display shows the projector’s DMX address and the Fixture ID address (if set).
During menu setting status, after a wait time (about 30 seconds) without any key having been pressed, the display automatically returns to rest status.
It should be noted than when this condition occurs, any possible value that has been modified but not yet confirmed with the
F
key will be cancelled.
CON ROL PANEL
1
2
Dmx Address
War ning Message
Fixture ID
8
Connecting to the control signal line (DMX) - Fig. 7
Use a cable conforming to specifications EIA RS-485: 2-pole twisted, shielded, 120Ohm characteristic impedance, 22-24 AWG, low capacity. Do not use
microphone cable or other cable with characteristics differing from those specified. The end connections must be made using XLR type 3/5-pin male/female
connectors. A terminating plug must be inserted into the last projector with a resistance of 120Ohm (minimum 1/4 W) between terminals 2 and 3.
IMPOR AN : The wires must not make contact with each other or with the metal casing of the connectors. The casing itself must be connected to the
shield braid and to pin 1 of the connectors.
SIGNAL
SCREEN
DMX 512
5 PIN
1
2
3
4
5
SIGNAL
SCREEN
1
3
2
DMX 512
3 PIN
SIGNAL
SIGNAL
Mains
6
7
Connecting to the mains supply - Fig. 6

6
K-EYE K10 & K20 HCR
28
28
Reversal of the display - Fig. 9
To activate this function, press UP
B
and DOWN
C
keys simultaneously while the display is in the rest mode. This status will be memorised and
maintained even for the next time it will be switched on. To return to the initial state, repeat the operation all over again.
Setting the projector starting address
On each projector, the starting address must be set for the control signal (addresses from 1 to 512).
The address can also be set with the projector switched off.
Setting the projector Fixture ID
On each projector, the Fixture ID address must be set for an easy identification of the fixtures in an installation (ID from 1 to 255).
The Fixture ID address can be set with the projector switched off.
9
Functions of the buttons - Using the menu
Setting addresses and options with the projector disconnected
The projector’s DMX address, as well as other possible operating options, can also be set when the appliance is disconnected from the electricity supply.
All that is needed is to press
F
to momentarily activate the display and thus access the settings. Once the required operations have been carried out,
the display will switch off again after a wait time of 30 seconds.
USING HE MENU:
1) Press
F
once – “Main Menu” appears on the display.
2) Use the UP
B
and DOWN
C
keys to select the menu to be used:
• Setup (Setup Menu): To set the setting options.
• Option (Option Menu): To set the operating options
• Informations (Informations Menu): To read the counters, software version and other information.
• Manual Control (Manual control Menu): To trigger the test and manual control functions.
• Test (Test Menu): To check the proper functionning of effects
• Advanced (Advanced Menu): Access to the "Advanced menu" is recommended for a trained technical personnel.
3) Press
F
to display the first item in the selected menu.
4) Use the UP
B
and DOWN
C
keys to select the MENU items.
Confirms the displayed value, or activates the displayed function, or enters the successive
menu.
Decreases the value displayed (with auto-repetitions) or passes to the next item in the menu.
Increases the value displayed (with auto-repetitions) or passes to the previous item in a menu.
Return to the top level.
Commute from units, tens, hundreds, in the "Address", "Fixture ID" and "Calibration" menù.
F
C
DOWN
B
UP
D
LEFT
E
RIG T

7
K-EYE K10 & K20 HCR
CAU ION:
• o avoid damage to the internal parts of the fixture when the fixture is not working, is recommended to turn the head down before turning the fixture
off, so that the front lenses of the fixture are invested as little as possible from the sun.
• Set Zoom channel to 255-bit before turning off the projector to facilitate the packaging of the projector.
• It is recommended not to use compressed air with more than 4 atmospheres for cleaning the internal parts of the fixture, led board area.
his is to avoid damaging electronic components.
•To ensure optimal operation and performance for a long time it is essential to periodically clean the parts subject to dust and grease deposits. The
frequency with which the following operations are to be carried out depends on various factors, such as the amount of the effects and the quality of
the working environment (air humidity, presence of dust, salinity, etc.).
It is recommended that the projector undergoes an annual service by a qualified technician for special maintenance involving at least the following
operations:
- General cleaning of internal parts.
- Restoring lubrication of all parts subject to friction, using lubricants specifically supplied by Claypaky.
- General visual check of the internal components, cabling, mechanical parts, etc.
- Electrical, photometric and functional checks; eventual repairs.
Cleaning the lenses
Only use neutral soap and water to clean the lenses, then dry it carefully with a soft, non-abrasive cloth. (WARNING: the use of alcohol or any other
detergent could damage the lenses).
Light collimation system
This product contains internal light
collimation system. Avoid intense
light from any angle.
Continue ➔
10
WARNING:
no alcohol

5
6
3
4
1
2
8
K-EYE K10 & K20 HCR
Battery removal - Fig. 11
This product contains a rechargeable battery. To preserve the environment, please dispose the battery at the end of its life according to the
regulation in force.
11

1
2
3
4
9
K-EYE K10 & K20 HCR
12
Opening the covers - Fig. 12
2
1
1
1
1
13
Removing/Assembling the lens unit - Fig. 13
MAIN ENANCE
Continue ➔

10
K-EYE K10 & K20 HCR
10
Replacing the line actuator - Fig. 14
ACCESSORIES
Two accessories are available for additional control of the beam:
TOP AT
Motorized Top at, which is applied to the front lens and pulls out
automatically together with the zoom. It works as frost/gel holder as well.
C21096 Optional Kit Top at K-EYE K10 CR
FROST/GEL OLDER
You can apply a frost diffuser or a gel by using the optional holder
C21094 Filter holder Kit K-EYE K10 CR
C21097 Optional Kit Top at K-EYE K20 CR C21095 Filter holder Kit K-EYE K20 CR
14

11
K-EYE K10 & K20 HCR
ECHNICAL INFORMA ION
K-EYE K10 HCR POWER SUPPLIES
100/240V 50/60 z
INPU POWER
450 VA
LIGH SOURCE
Light sources: 6-color LED modules
LED module: R+G+B+Amber+Cyan+Lime
Number of LEDS: 19
LED life expectancy: min. 50,000h
Total lumen output: 5,500 lumen
Typical lumen manteinance: 70%@50,000 hours
Typical CRI value > 97 up to 99
OP ICS
Optics featuring 6-color LED module system + rod-
bar mixing system + front lens
6°- 50° linear electronic Zoom
COLOR SYS EM
Color system: R+G+B+Cyan+Amber+Lime LED
module
Color Temperature control: Linear from 2500K to
8000K (CTO controlled mode plus RAGCB correction)
Control of the colors: RAW mode, SL mode, RGB
mode, CMY mode
- RAW mode Enable specific control of each color
- SL mode function is based on algorithm. SL
parameters: UE, UE fine, Saturation,
Crossfade, Path, Tint
- RGB mode The projectors works in the same
way as a classical RGB fixture
- CMY mode The projectors works in the same
way as a classical CMY fixture
alo Emulation 750W, 1000W, 1200W, 2000W,
2500W lamp emulation.
Gamma Wave: Different chromatic curves for each
color
Macro: Dedicated color macro channel with 80
preselected colors
EFFEC S SEC ION
Electronic and linear dimmer, 16 bit
Strobe 24 flash/sec. Electronic, instant open and
blackout. Variable speed pulsation
CON ROL AND PROGRAMMING
27/31 DMX 512 control channels
Control signal: USITT DMX 512
Protocols: RDM, WebServer and Art-Net
Display: Graphic LCD backlit b/w display
Display battery: Long life self-charging buffer battery
Pan/Tilt Resolution 16 bit
Dimmer Resolution 16 bit
Movement control: vectorial
DMX signal connection: 3 and 5 pole XLR input
and output
Firmware update: Software upload through DMX
input
BODY
Structure in aluminium with die-cast plastic cover
andles Two side handles for transportation
Device locking PAN and TILT mechanisms for
transportation
Optional frame for external gels and frost filters
Optional top hat (adjustable with the Zoom
movement)
MOVING BODY
PAN range: 540°
TILT range: 210°
ELEC RONICS
Long-life auto-charging buffer battery
Preset color and graphic effect macros
Function reset controllable from a central control
unit
Menu-driven internal self-test function
Electronic check-up of every single parameter with
error alarm
DMX level monitoring on each channel
Automatic internal data transmission error
diagnostics
Firmware upgrade with no power
Firmware transfer from one light to another
SAFE Y DEVICES
Minimum distance of illuminated objects: 0.2
meters (8”)
Minimum distance from flammable materials: 0.2
meters (8”)
Max ambient temperature: 40°C (104°F)
Max temperature of the external surface: 90°C
(194°F)
Bipolar circuit breaker with thermal protection
Automatic break in power supply in case of
overheating
Forced ventilation withaxial fans
WORKING POSI ION
Working position: Any
anging system: 2xfast-lock omega clamps (1/4
turn) on the base
Optional 48-51mm, max300Kg clamps; Ø 4mm,
lenght680mm safety cable
CE MARKING
In conformity with the European Directives:
• 2014/35/EU - Safety of electrical equipment
supplied at low voltage (LVD)
• 2014/30/EU - Electromagnetic Compatibility
(EMC)
• 2011/65/EU - Restriction of the use of certain
hazardous substances (Ro S)
• 2009/125/EC - EcoDesign requirements for
Energy-related Products (ErP)
WEIGH
16.5 Kg (36.38 lbs)
CAUSE AND SOLU ION OF PROBLEMS
TE PROJECTOR WILL NOT SWITC ON
PROBLEMS
ELECTRONICS NON-OPERATIONAL
DEFECTIVE PROJECTION
REDUCED LUMINOSITY
POSSIBLE CAUSES CHECKS AND REMEDIES
No mains supply.
LED exhausted or defective.
Signal transmission cable faulty or disconnected.
Incorrect addressing.
Fault in the electronic circuits.
Lenses broken
Dust or grease deposited.
Check the power supply voltage.
Call an authorised technician.
Replace the cables.
Check addresses (see instructions).
Call an authorised technician.
Call an authorised technician.
Clean (see instructions).
496
(19.53")
224
(8.82")
Zoom IN
274
(10.79")
Zoom OUT
387
(15.24")
292
(11.50")
438
(17.24")
257
(10.12")
391
(15.39")

605
(23.82")
495
(19.49")
355
(13.98")
488
(19.21")
251
(9.89")
Zoom IN
301
(11,85")
Zoom OUT
423
(16.65")
328
(12.91")
K-EYE K20 HCR
POWER SUPPLIES
100/240V 50/60 z
INPU POWER
750 VA
LIGH SOURCE
Light sources: 6-color LED modules
LED module: R+G+B+Amber+Cyan+Lime
Number of LEDS: 37
LED life expectancy: min. 50,000h
Total lumen output: 11,000 lumen
Typical lumen manteinance: 70%@50,000 hours
Typical CRI value > 97 up to 99
OP ICS
Optics featuring 6-color LED module system + rod-
bar mixing system + front lens
6°- 50° linear electronic Zoom
COLOR SYS EM
Color system: R+G+B+Cyan+Amber+Lime LED
module
Color Temperature control: Linear from 2500K to
8000K (CTO controlled mode plus RAGCB
correction)
Control of the colors: RAW mode, SL mode, RGB
mode, CMY mode
- RAW mode Enable specific control of each color
- SL mode function is based on algorithm. SL
parameters: UE, UE fine, Saturation,
Crossfade, Path, Tint
- RGB mode The projectors works in the same
way as a classical RGB fixture
- CMY mode The projectors works in the same
way as a classical CMY fixture
alo Emulation 750W, 1000W, 1200W, 2000W,
2500W lamp emulation
Gamma Wave: Different chromatic curves for each
color
Macro: Dedicated color macro channel with 80
preselected colors
EFFEC S SEC ION
Electronic and linear dimmer, 16 bit
Strobe 24 flash/sec. Electronic, instant open and
blackout. Variable speed pulsation
CON ROL AND PROGRAMMING
27/31 DMX 512 control channels
Control signal: USITT DMX 512
Protocols: RDM, WebServer and Art-Net
Display: Graphic LCD backlit b/w display
Display battery: Long life self-charging buffer battery
Pan/Tilt Resolution 16 bit
Dimmer Resolution 16 bit
Movement control: vectorial
DMX signal connection: 3 and 5 pole XLR input and
output
Firmware update: Software upload through DMX
input
BODY
Structure in aluminium with die-cast plastic cover
andles Two side handles for transportation
Device locking PAN and TILT mechanisms for
transportation
Optional frame for external gels and frost filters
Optional top hat (adjustable with the Zoom movement)
MOVING BODY
PAN range: 540°
Resolution: PAN = 2.11° - PAN FINE = 0.008°
TILT range: 210°
Resolution: TILT = 0.960° - TILT FINE = 0.004°
ELEC RONICS
Long-life auto-charging buffer battery
Preset color and graphic effect macros
Function reset controllable from a central control unit
Menu-driven internal self-test function
Electronic check-up of every single parameter with
error alarm
DMX level monitoring on each channel
Automatic internal data transmission error diagnostics
Firmware upgrade with no power
Firmware transfer from one light to another
SAFE Y DEVICES
Minimum distance of illuminated objects: 0.2
meters (8”)
Minimum distance from flammable materials: 0.2
meters (8”)
Max ambient temperature: 40°C (104°F)
Max temperature of the external surface: 90°C
(194°F)
Bipolar circuit breaker with thermal protection
Automatic break in power supply in case of
overheating
Forced ventilation withaxial fans
WORKING POSI ION
Working position: Any
anging system: 2xfast-lock omega clamps (1/4
turn) on the base
Optional 48-51mm, max300Kg clamps; Ø 4mm,
lenght680mm safety cable
CE MARKING
In conformity with the European Directives:
• 2014/35/EU - Safety of electrical equipment
supplied at low voltage (LVD)
• 2014/30/EU - Electromagnetic Compatibility
(EMC)
• 2011/65/EU - Restriction of the use of certain
hazardous substances (Ro S)
• 2009/125/EC - EcoDesign requirements for
Energy-related Products (ErP)
WEIGH
22.5 Kg (49.6 lbs)
Clay Paky S.p.A. - Via Pastrengo, 3/b - 24068 Seriate (BG) Italy - Tel. [phone] - Fax [phone] - www.claypaky.com
IST011/001 – EN - Rev.0 08/2018