Clear Comfort CCW300 User manual

INSTALLATION INSTRUCTIONS:
1. Mount the Clear Comfort system near the surge pit to
minimize the length of blue Air Tubing.
2. Mount the Air Compressor near the Clear Comfort
system. Connect blue Air Tubing from the Compressor's
barb tting to the bottom of the Clear Comfort system's
owmeter (attached to the right side of the system)
and secure with hose clamps.
3. Thread the included Compressor Silencer/Filter into
the Air Compressor's open intake port.
4. Run Air Tubing from the Clear Comfort System into
the surge pit.
• If needed, core drill through concrete oor.
• If tubing needs to cross a oor, route Air Tubing
through grating or hatch and use conduit that is
secured to oor.
5. Connect the barb tting(s) and Diffuser(s) to the PVC
Diffuser Manifold(s). Important: Do not overtighten
diffuser, cracking of the PVC tee may occur.
6. Connect Air Tubing to the Diffuser
barb tting(s) and secure
with clamp.
7. If installing a CCW300 or CCW500 system, connect the
included 1/4" splitter barb tting to the Air Tubing at the
bottom of the surge pit.
Then, connect
Air Tubing from
the splitter to each
Diffuser and secure
each connection
with clamps.
8. In the surge pit,
position Diffuser(s)
near the location
that water enters the
pit and away from
the pump suction.
9. Mount the Junction Box on a wall. Insert the Clear Comfort
system cord into the Junction Box's open watertight strain
relief tting and connect wires to the provided lever nuts:
green to green, black to black and white to white.
10. Plug in the Junction Box's power cord, press the Clear
Comfort system's power button ON and use the owmeter's
adjustment knob to set the ow rate.
CLEAR COMFORT: Quick Guide
Surge Pit Diffuser Installation
303.872.4477 [e-mail] clearcomfort.com
©2021 Clear Comfort. All Rights Reserved. MADE IN USA
Air
Tubing
Clear Comfort
Commercial System
10
8
6
4
2
1/ min AIR
Air
Compressor
KIT CONTENTS:
Diffuser(s) Air Compressor Air Tubing Junction Box
Compressor
Silencer/Filter

CLEAR COMFORT: Quick Guide
Surge Pit Diffuser Installation
303.872.4477 [e-mail] clearcomfort.com
©2021 Clear Comfort. All Rights Reserved. MADE IN USA
PLEASE NOTE:
• For the best mixing and bubble removal, position the Diffuser below the gutter/main drain pipes.
• Not all Surge Pits are designed the same. For additional installation questions, please use the
information below to contact Clear Comfort’s customer success team.
Chlorine
Injection Site
RETURN TO
POOL
Diffusers
FROM
GUTTER
FROM
MAIN DRAIN
Surge Pit
Filter
Pump
Heater
Air
Tubing
120V
Outlet
Junction
Box
Clear Comfort
Commercial System
10
8
6
4
2
1/ min AIR
Air Compressor